[U-Boot] [PATCH 1/2] ARM: atmel: switch to main crystal osc for SPL boot
If without switch to main crystal oscillator, the sama5d3 SoC will use internal on chip RC oscillator. In order to get better accuracy, switch to main crystal oscillator.
Signed-off-by: Bo Shen voice.shen@atmel.com --- arch/arm/cpu/at91-common/spl.c | 39 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 ++++ 2 files changed, 43 insertions(+)
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 7f4debb..cbb5a52 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -20,6 +20,43 @@ static void at91_disable_wdt(void) writel(AT91_WDT_MR_WDDIS, &wdt->mr); }
+static void switch_to_main_crystal_osc(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff); + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_MOSCEN; + tmp |= AT91_PMC_MOR_OSCOUNT(8); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCBYPASS; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + tmp = readl(&pmc->mor); + tmp |= AT91_PMC_MOR_MOSCSEL; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_MOSCRCEN; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); +} + void at91_plla_init(u32 pllar) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -76,6 +113,8 @@ u32 spl_boot_mode(void)
void s_init(void) { + switch_to_main_crystal_osc(); + /* disable watchdog */ at91_disable_wdt();
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 4535608..04f6239 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -70,7 +70,10 @@ typedef struct at91_pmc {
#define AT91_PMC_MOR_MOSCEN 0x01 #define AT91_PMC_MOR_OSCBYPASS 0x02 +#define AT91_PMC_MOR_MOSCRCEN 0x08 #define AT91_PMC_MOR_OSCOUNT(x) ((x & 0xff) << 8) +#define AT91_PMC_MOR_KEY(x) ((x & 0xff) << 16) +#define AT91_PMC_MOR_MOSCSEL (1 << 24)
#define AT91_PMC_PLLXR_DIV(x) (x & 0xFF) #define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8) @@ -142,6 +145,7 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_PCKRDY1 0x00000200 #define AT91_PMC_IXR_PCKRDY2 0x00000400 #define AT91_PMC_IXR_PCKRDY3 0x00000800 +#define AT91_PMC_IXR_MOSCSELS 0x00010000
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
It supports boot from NAND and SD/MMC card.
Signed-off-by: Bo Shen voice.shen@atmel.com --- board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++++++++++++++++++++++ include/configs/sama5d3_xplained.h | 50 ++++++++++++++ 2 files changed, 137 insertions(+)
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 39f2dc6..92ed4e8 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -17,6 +17,9 @@ #include <atmel_mci.h> #include <net.h> #include <netdev.h> +#include <spl.h> +#include <asm/arch/atmel_mpddrc.h> +#include <asm/arch/at91_wdt.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -128,3 +131,87 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + sama5d3_xplained_mci0_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + sama5d3_xplained_nand_hw_init(); +#endif +} + +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_ENRDM_ON | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_NDQS_DISABLED | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + /* + * As the DDR2-SDRAm device requires a refresh time is 7.8125us + * when DDR run at 133MHz, so it needs (7.8125us * 133MHz / 10^9) clocks + */ + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 28 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 26 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddr ddr2; + + ddr2_conf(&ddr2); + + /* enable MPDDR clock */ + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(0x4, &pmc->scer); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_DDRCS, &ddr2); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(43) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x3 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_MDIV_4 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 91cc7d8..1f7d727 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -21,7 +21,11 @@
#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO
@@ -75,8 +79,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x10000000
+#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x310000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif
/* NAND flash */ #define CONFIG_CMD_NAND @@ -200,4 +208,46 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#endif + #endif
Dear Bo Shen,
Bo Shen voice.shen@atmel.com writes:
It supports boot from NAND and SD/MMC card.
Signed-off-by: Bo Shen voice.shen@atmel.com
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 87 +++++++++++++++++++++++++ include/configs/sama5d3_xplained.h | 50 ++++++++++++++ 2 files changed, 137 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards, Andreas Bießmann
Dear Bo Shen,
Bo Shen voice.shen@atmel.com writes:
If without switch to main crystal oscillator, the sama5d3 SoC will use internal on chip RC oscillator. In order to get better accuracy, switch to main crystal oscillator.
Signed-off-by: Bo Shen voice.shen@atmel.com
arch/arm/cpu/at91-common/spl.c | 39 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-at91/at91_pmc.h | 4 ++++ 2 files changed, 43 insertions(+)
applied to u-boot-atmel/master, thanks!
Best regards, Andreas Bießmann
participants (2)
-
Andreas Bießmann -
Bo Shen