Updated the spi_flash framework to handle all sizes of flashes using bank/extd addr reg facility

The current implementation in spi_flash supports 3-byte address mode due to this up to 16Mbytes amount of flash is able to access for those flashes which has an actual size of > 16MB.

As most of the flashes introduces a bank/extd address registers for accessing the flashes in 16Mbytes of banks if the flash size is > 16Mbytes, this new scheme will add the bank selection feature for performing write/erase operations on all flashes.

Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- Changes for v3: - none Changes for v2: - none

drivers/mtd/spi/spi_flash.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 4576a16..5386884 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -74,11 +74,9 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, unsigned long page_addr, byte_addr, page_size; size_t chunk_len, actual; int ret; - u8 cmd[4]; + u8 cmd[4], bank_sel;

page_size = flash->page_size; - page_addr = offset / page_size; - byte_addr = offset % page_size;

ret = spi_claim_bus(flash->spi); if (ret) { @@ -88,6 +86,16 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,

cmd[0] = CMD_PAGE_PROGRAM; for (actual = 0; actual < len; actual += chunk_len) { + bank_sel = offset / SPI_FLASH_16MB_BOUN; + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } + + page_addr = offset / page_size; + byte_addr = offset % page_size; chunk_len = min(len - actual, page_size - byte_addr);

if (flash->spi->max_write_size) @@ -117,11 +125,7 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, if (ret) break;

- byte_addr += chunk_len; - if (byte_addr == page_size) { - page_addr++; - byte_addr = 0; - } + offset += chunk_len; }

spi_release_bus(flash->spi); @@ -204,9 +208,9 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)

int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) { - u32 end, erase_size; + u32 erase_size; int ret; - u8 cmd[4]; + u8 cmd[4], bank_sel;

erase_size = flash->sector_size; if (offset % erase_size || len % erase_size) { @@ -224,11 +228,17 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) cmd[0] = CMD_ERASE_4K; else cmd[0] = CMD_ERASE_64K; - end = offset + len;

- while (offset < end) { + while (len) { + bank_sel = offset / SPI_FLASH_16MB_BOUN; + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } + spi_flash_addr(offset, cmd); - offset += erase_size;

debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], cmd[2], cmd[3], offset); @@ -244,6 +254,9 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); if (ret) goto out; + + offset += erase_size; + len -= erase_size; }

out: