Hello,

Kernel mounted the root file system but can not find any init script. I'm sure that script exists in my ramdisk.img!

I also checked out http://www.denx.de/wiki/view/DULG/UBootCmdGroupFlash#Section_5.9.3.5 and GE863-PRO3 U-BOOT Software User Guide 1VV0300777 Rev. 6 – 2010-01-25.

¿Any idea or alternative documentation?

MY ENVIRONMENT: GE863-PRO3 128/64 version

U-Boot 1.2.0 (Aug 18 2010 - 12:16:10)- 221 Telit

DRAM: 64 MB

Bank #1 Flash:NAND Numonyx NAND01G-B2B 128MB 1.8V 8-bit Hardware ECC (ECC data size = 512 bytes) Nb min erasable unit: 1024 min erasable Size: 131072 Size=134217728 bytes Logical address: 0x40000000 No bad block detected Area 0: 40000000 to 403BFFFF (RO) Primary Bootstrap Area 1: 403C0000 to 4043FFFF (RO) U-Boot code Area 2: 40440000 to 404BFFFF (RO) U-Boot Environment Area 3: 404C0000 to 407BFFFF User Area 1 Area 4: 407C0000 to 47FFFFFF User Area 2

U-BOOT COMMANDS:

setenv bootargs console=ttyS0,115200 mem=64M ver=4384k icofat=257k rootfstype=jffs2 root=/dev/mtdblock1 rw mtdparts=at91_nand:7936k(ARMboot)ro,-@7936k(root) init=/bin/busybox ethinit 192.168.122.3 erase 404C0000 47FFFFFF tftp 20200000 ramdisk.img cp.b 20200000 0x407c0000 14cd78 tftp 20200000 uImage bootm

BOOT OUTPUT:

VFS: Mounted root (jffs2 filesystem). Freeing init memory: 96K Setting DMA Console Failed to execute /bin/busybox. Attempting defaults... Kernel panic - not syncing: No init found. Try passing init= option to kernel. Function entered at [<c01de28c>] from [<c01de304>] Function entered at [<c01de2a0>] from [<c0020398>] r3:c3c1ac40 r2:c3c1ac40 r1:c3c1deb0 r0:c01c3cab Function entered at [<c00202dc>] from [<c00085e0>] r4:c020d2c0 Function entered at [<c00083b8>] from [<c003a454>]

Thank you in advance!.