[U-Boot] SMDK2410 board
I'm trying to get u-boot running on a smdk2410-based board. I'm using openocd and jtag and am trying to load u-boot into ram as follows:
load_image u-boot.bin 0x33f80000
Which *seems* to work: 103668 bytes written at address 0x33f80000 downloaded 103668 byte in 0.500045s
I then try to run it by using resume 0x33f80000 but it doesn't seem that u-boot is executing. What am I doing wrong?
Dear David Kaplan,
In message 62564a490911010039xb4c7768mb51016cdd42c8e81@mail.gmail.com you wrote:
I'm using openocd and jtag and am trying to load u-boot into ram as follows:
...
I then try to run it by using resume 0x33f80000 but it doesn't seem that u-boot is executing. What am I doing wrong?
Maybe you failed tor ead the FAQ: http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStarted...
Best regards,
Wolfgang Denk
participants (2)
-
David Kaplan -
Wolfgang Denk