The previous instructions resulted in a bootloader that wouldn't fit in an MBR gap. I have updated the docs based on upstream's build process.

Signed-off-by: Baltazár Radics baltazar.radics@gmail.com ---

doc/board/amlogic/odroid-n2.rst | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/doc/board/amlogic/odroid-n2.rst b/doc/board/amlogic/odroid-n2.rst index 883720f8fb..5222a21c80 100644 --- a/doc/board/amlogic/odroid-n2.rst +++ b/doc/board/amlogic/odroid-n2.rst @@ -54,10 +54,9 @@ image so it is necessary to obtain binaries from sources published by the board $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH

- $ DIR=odroid-n2 - $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 $DIR + $ git clone --depth 1 https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 odroidg12

- $ cd odroid-n2 + $ cd odroidg12 $ make odroidn2_defconfig $ make $ export UBOOTDIR=$PWD @@ -74,12 +73,8 @@ Go back to the mainline U-Boot source tree then: $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ - $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ $ cp u-boot.bin fip/bl33.bin @@ -113,7 +108,7 @@ Go back to the mainline U-Boot source tree then: --level v3 --type bl31 $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 + --level v3 --type bl33 $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ --output fip/bl2.n.bin.sig $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ @@ -124,11 +119,7 @@ Go back to the mainline U-Boot source tree then: --bl33 fip/bl33.bin.enc \ --ddrfw1 fip/ddr4_1d.fw \ --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ --ddrfw8 fip/aml_ddr.fw \ --level v3