Hello,

We are able to build ROM u-boot for MPC8260 based customs board. We have observed a strange behavior of the board. When we power it up at the beginning of the day; it resets and resets. After a couple of power on/off we get the boot prompt. I am giving the log what we get after we power it up for the first time. Any help will be appreciated.

*****LOG********************

U-Boot 1.1.2 (Jan 5 2006 - 15:01:10)

MPC8260 Reset Status: External Soft, External Hard

MPC8260 Clock Configuration - Bus-to-Core Mult 3x, VCO Div 2, 60x Bus Freq 33-100, Core Freq 100-300 - dfbrg 1, corecnf 0x08, busdf 3, cpmdf 1, plldf 0, pllmf 1 - vco_out 248000000, scc_clk 62000000, brg_clk 15500000 - cpu_clk 186000000, cpm_clk 124000000, bus_clk 62000000

CPU: MPC8260 (HiP4 Rev 14, Mask B.1 4K25A) at 186 MHz Board: Motorola MPC8260ADS DRAM: 256 MB Top of RAM usable for U-Boot at: 10000000 Reserving 221k for U-Boot at: 0ffc8000 Reserving 4352k for malloc() at: 0fb88000 Reserving 76 Bytes for Board Info at: 0fb87fb4 Reserving 72 Bytes for Global Data at: 0fb87f6c Stack Pointer at: 0fb87f48 New Stack Pointer is: 0fb87f48 Now running in RAM - U-Boot at: 0ffc8000 FLASH: Address at 0th 8 and 1st 8 b4 Address at 0th 8 and 1st 8 a4 Address at 0th 8 and 1st 8 a4 vals ### Unknown flash ID 00000008 00000008 at address FE000000 ### 0 th flash size = 524288 bytes1 th flash size = 524288 bytesflash_protect ON: from 0xFE000000 to 0xFE031FFF flash_protect ON: from 0xFE040000 to 0xFE07FFFF 1 MBTesting Flash Size Flash Start fe000000 Flash Size 100000 Flash Offset 2 32000 CPU INIT

U-Boot 1.1.2 (Jan 5 2006 - 15:01:10)

**************LOG*********************

Thanks, Batsayan Das

Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you