Re: [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot
[resend to the list too this time]
On Sat, Jul 09, 2022 at 12:43:44AM +0200, Pali Rohár wrote:
PING????
I still have not received any response. What is the point?
On Sunday 03 July 2022 14:38:36 Pali Rohár wrote:
PING!
On Thursday 23 June 2022 15:43:45 Pali Rohár wrote:
On Thursday 16 June 2022 17:01:50 Peng Fan (OSS) wrote:
在 2022/4/25 22:50, Pali Rohár 写道:
All *boot env commands overrides default boot source location via i2c. After board reset without power off, BootROM then starts booting U-Boot from this specified location instead of the default one.
Add new env command defboot which reverts boot location to the default value, which in most cases is configurable by HW DIP switches.
And add new env commands norlowerboot, norupperboot, sd2boot to boot from other locations. norlowerboot would instruct BootROM to boot from lower NOR bank, norupperboot from upper NOR bank and sd2boot from SD card with alternative configuration.
Signed-off-by: Pali Rohár pali@kernel.org
Not able to apply this patch.
And what is the reason? It applies cleanly on top of next branch, which is today at commit 9121478ee6f2aee381f8fe49d8997d43527d351a.
Peng, this patch doesn't apply currently but also looks fairly obvious to adapt to top of tree. Please just make it apply when you pick this up, thanks.
On Friday 08 July 2022 19:12:10 Tom Rini wrote:
[resend to the list too this time]
On Sat, Jul 09, 2022 at 12:43:44AM +0200, Pali Rohár wrote:
PING????
I still have not received any response. What is the point?
On Sunday 03 July 2022 14:38:36 Pali Rohár wrote:
PING!
On Thursday 23 June 2022 15:43:45 Pali Rohár wrote:
On Thursday 16 June 2022 17:01:50 Peng Fan (OSS) wrote:
在 2022/4/25 22:50, Pali Rohár 写道:
All *boot env commands overrides default boot source location via i2c. After board reset without power off, BootROM then starts booting U-Boot from this specified location instead of the default one.
Add new env command defboot which reverts boot location to the default value, which in most cases is configurable by HW DIP switches.
And add new env commands norlowerboot, norupperboot, sd2boot to boot from other locations. norlowerboot would instruct BootROM to boot from lower NOR bank, norupperboot from upper NOR bank and sd2boot from SD card with alternative configuration.
Signed-off-by: Pali Rohár pali@kernel.org
Not able to apply this patch.
And what is the reason? It applies cleanly on top of next branch, which is today at commit 9121478ee6f2aee381f8fe49d8997d43527d351a.
Peng, this patch doesn't apply currently but also looks fairly obvious to adapt to top of tree. Please just make it apply when you pick this up, thanks.
-- Tom
Month ago it applied cleanly on next :-(
On Friday 22 July 2022 00:20:21 Pali Rohár wrote:
On Friday 08 July 2022 19:12:10 Tom Rini wrote:
[resend to the list too this time]
On Sat, Jul 09, 2022 at 12:43:44AM +0200, Pali Rohár wrote:
PING????
I still have not received any response. What is the point?
On Sunday 03 July 2022 14:38:36 Pali Rohár wrote:
PING!
On Thursday 23 June 2022 15:43:45 Pali Rohár wrote:
On Thursday 16 June 2022 17:01:50 Peng Fan (OSS) wrote:
在 2022/4/25 22:50, Pali Rohár 写道: > All *boot env commands overrides default boot source location via i2c. > After board reset without power off, BootROM then starts booting U-Boot > from this specified location instead of the default one. > > Add new env command defboot which reverts boot location to the default > value, which in most cases is configurable by HW DIP switches. > > And add new env commands norlowerboot, norupperboot, sd2boot to boot from > other locations. norlowerboot would instruct BootROM to boot from lower NOR > bank, norupperboot from upper NOR bank and sd2boot from SD card with > alternative configuration. > > Signed-off-by: Pali Rohár pali@kernel.org
Not able to apply this patch.
And what is the reason? It applies cleanly on top of next branch, which is today at commit 9121478ee6f2aee381f8fe49d8997d43527d351a.
Peng, this patch doesn't apply currently but also looks fairly obvious to adapt to top of tree. Please just make it apply when you pick this up, thanks.
-- Tom
Month ago it applied cleanly on next :-(
Now I tested this patch and it still applies cleanly on top of master branch. I just downloaded MBOX version from patchwork: https://patchwork.ozlabs.org/project/uboot/patch/20220425145043.9945-1-pali@...
Could you please process it? It is there since April.
And if it has issue, could you please say something about it?
participants (2)
-
Pali Rohár -
Tom Rini