From: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com

Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com --- board/logicpd/zoom3/zoom3_serial.h | 76 ++++++++++++++++++++++++++++++++++++ 1 files changed, 76 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/zoom3/zoom3_serial.h

diff --git a/board/logicpd/zoom3/zoom3_serial.h b/board/logicpd/zoom3/zoom3_serial.h new file mode 100644 index 0000000..f581a7f --- /dev/null +++ b/board/logicpd/zoom3/zoom3_serial.h @@ -0,0 +1,76 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix Tom.Rix@windriver.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef ZOOM3_SERIAL_H +#define ZOOM3_SERIAL_H + +extern int zoom3_debug_board_connected(void); + +#define SERIAL_TL16CP754C_BASE 0x10000000 /* Zoom3 serial chip address */ + +#define QUAD_BASE_0 SERIAL_TL16CP754C_BASE +#define QUAD_BASE_1 (SERIAL_TL16CP754C_BASE + 0x100) +#define QUAD_BASE_2 (SERIAL_TL16CP754C_BASE + 0x200) +#define QUAD_BASE_3 (SERIAL_TL16CP754C_BASE + 0x300) + +#define S(a) #a +#define N(a) S(quad##a) +#define U(a) S(UART##a) + +#define QUAD_INIT(n) \ +int quad_init_##n(void) \ +{ \ + return quad_init_dev(QUAD_BASE_##n); \ +} \ +void quad_setbrg_##n(void) \ +{ \ + quad_setbrg_dev(QUAD_BASE_##n); \ +} \ +void quad_putc_##n(const char c) \ +{ \ + quad_putc_dev(QUAD_BASE_##n, c); \ +} \ +void quad_puts_##n(const char *s) \ +{ \ + quad_puts_dev(QUAD_BASE_##n, s); \ +} \ +int quad_getc_##n(void) \ +{ \ + return quad_getc_dev(QUAD_BASE_##n); \ +} \ +int quad_tstc_##n(void) \ +{ \ + return quad_tstc_dev(QUAD_BASE_##n); \ +} \ +struct serial_device zoom3_serial_device##n = \ +{ \ + N(n), \ + U(n), \ + quad_init_##n, \ + NULL, \ + quad_setbrg_##n, \ + quad_getc_##n, \ + quad_tstc_##n, \ + quad_putc_##n, \ + quad_puts_##n, \ +}; + +#endif /* ZOOM3_SERIAL_H */

From: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com

Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com --- board/logicpd/zoom3/led.c | 133 +++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 133 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/zoom3/led.c

diff --git a/board/logicpd/zoom3/led.c b/board/logicpd/zoom3/led.c new file mode 100644 index 0000000..1871d79 --- /dev/null +++ b/board/logicpd/zoom3/led.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix Tom.Rix@windriver.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <status_led.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/gpio.h> + +static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF}; + +/* + * GPIO LEDs + * 173 red + * 154 blue + * 61 blue2 + */ +#define ZOOM3_LED_RED 173 +#define ZOOM3_LED_BLUE 154 +#define ZOOM3_LED_BLUE2 61 + +void red_LED_off(void) +{ + /* red */ + if (!omap_request_gpio(ZOOM3_LED_RED)) { + omap_set_gpio_direction(ZOOM3_LED_RED, 0); + omap_set_gpio_dataout(ZOOM3_LED_RED, 0); + } + + saved_state[STATUS_LED_RED] = STATUS_LED_OFF; +} + +void blue_LED_off(void) +{ + /* blue */ + if (!omap_request_gpio(ZOOM3_LED_BLUE)) { + omap_set_gpio_direction(ZOOM3_LED_BLUE, 0); + omap_set_gpio_dataout(ZOOM3_LED_BLUE, 0); + } + + /* blue 2 */ + if (!omap_request_gpio(ZOOM3_LED_BLUE2)) { + omap_set_gpio_direction(ZOOM3_LED_BLUE2, 0); + omap_set_gpio_dataout(ZOOM3_LED_BLUE2, 0); + } + + saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF; +} + +void red_LED_on(void) +{ + blue_LED_off(); + + /* red */ + if (!omap_request_gpio(ZOOM3_LED_RED)) { + omap_set_gpio_direction(ZOOM3_LED_RED, 0); + omap_set_gpio_dataout(ZOOM3_LED_RED, 1); + } + + saved_state[STATUS_LED_BLUE] = STATUS_LED_ON; +} + +void blue_LED_on(void) +{ + red_LED_off(); + + /* blue */ + if (!omap_request_gpio(ZOOM3_LED_BLUE)) { + omap_set_gpio_direction(ZOOM3_LED_BLUE, 0); + omap_set_gpio_dataout(ZOOM3_LED_BLUE, 1); + } + + /* blue 2 */ + if (!omap_request_gpio(ZOOM3_LED_BLUE2)) { + omap_set_gpio_direction(ZOOM3_LED_BLUE2, 0); + omap_set_gpio_dataout(ZOOM3_LED_BLUE2, 1); + } + + saved_state[STATUS_LED_BLUE] = STATUS_LED_ON; +} + +void __led_init(led_id_t mask, int state) +{ + __led_set(mask, state); +} + +void __led_toggle(led_id_t mask) +{ + if (STATUS_LED_BLUE == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_BLUE]) + blue_LED_off(); + else + blue_LED_on(); + } else if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) + red_LED_off(); + else + red_LED_on(); + } +} + +void __led_set(led_id_t mask, int state) +{ + if (STATUS_LED_BLUE == mask) { + if (STATUS_LED_ON == state) + blue_LED_on(); + else + blue_LED_off(); + } else if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == state) + red_LED_on(); + else + red_LED_off(); + } +}

From: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com

Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com --- board/logicpd/zoom3/config.mk | 33 +++++++++++++++++++++++++++++++++ 1 files changed, 33 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/zoom3/config.mk

diff --git a/board/logicpd/zoom3/config.mk b/board/logicpd/zoom3/config.mk new file mode 100644 index 0000000..33f394b --- /dev/null +++ b/board/logicpd/zoom3/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# Texas Instruments, <www.ti.com> +# +# Zoom II uses OMAP3 (ARM-CortexA8) CPU +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 0x80000000 (bank0) +# 0xA0000000 (bank1) +# Linux-Kernel is expected to be at 0x80008000, entry 0x80008000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000

From: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com

Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com --- include/configs/omap3_zoom3.h | 271 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 271 insertions(+), 0 deletions(-) create mode 100644 include/configs/omap3_zoom3.h

diff --git a/include/configs/omap3_zoom3.h b/include/configs/omap3_zoom3.h new file mode 100644 index 0000000..e70f1cf --- /dev/null +++ b/include/configs/omap3_zoom3.h @@ -0,0 +1,271 @@ +/* + * (C) Copyright 2006-2010 Texas Instruments. + * + * Richard Woodruff r-woodruff2@ti.com + * Syed Mohammed Khasim x0khasim@ti.com + * Nishanth Menon nm@ti.com + * Tom Rix Tom.Rix@windriver.com + * Aldo Cedillo aldo.cedillo@ti.com + * + * Configuration settings for the TI OMAP3630 Zoom 3 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP36XX 1 /* which is a 36XX */ +#define CONFIG_OMAP3_ZOOM3 1 /* working with a Zoom3 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock defines */ +#define V_OSCK 2600000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +/* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + * Zoom3 uses the TL16CP754C on the debug board + */ +#define CONFIG_SERIAL_MULTI 1 + +/* + * 0 - 1 : first USB with respect to the left edge of the debug board + * 2 - 3 : second USB with respect to the left edge of the debug board + */ +#define ZOOM3_DEFAULT_SERIAL_DEVICE (&zoom3_serial_device0) + +#define V_NS16550_CLK (1843200) /* 1.8432 Mhz */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_REG_SIZE (-2) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200} + +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* DDR - Use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + +/* Status LED */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_BLUE 0 /* Check what color is used */ +#define STATUS_LED_RED 1 /* when using 3630 */ +/* Blue */ +#define STATUS_LED_BIT STATUS_LED_BLUE +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Red */ +#define STATUS_LED_BIT1 STATUS_LED_RED +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT + +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */ +#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */ +#endif +#define CONFIG_OMAP3_GPIO_3 /* board revision */ +#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */ + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "Zoom3" + +/* Commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT /* FAT support */ +#undef CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH + +/* + * Board NAND info + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "usbtty=cdc_acm\0" \ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_PROMPT "OMAP3 Zoom3 #" +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* Memset from start of memory to 31MB */ +#define OMAP36XX_SDRC_CS0 OMAP34XX_SDRC_CS0 /* It's the same as in 34XX */ +#define CONFIG_SYS_MEMTEST_START (OMAP36XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP36XX_SDRC_CS0 + 0x01f00000) +/* The default load address is the start of memory */ +#define CONFIG_SYS_LOAD_ADDR (OMAP36XX_SDRC_CS0) +/* Everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ + +/* + * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define OMAP36XX_GPT2 OMAP34XX_GPT2 /* It's the same as in 34XX */ +#define CONFIG_SYS_TIMERBASE (OMAP36XX_GPT2) +#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ +#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using these settings + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/* + * Physical memory map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not */ + /* be populated */ +#define PHYS_SDRAM_1 OMAP36XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) +#define PHYS_SDRAM_2 OMAP36XX_SDRC_CS1 + +/* SDRAM bank allocation method */ +#define SDRC_R_B_C + +/* + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT **** */ +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */ + /* one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec +#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/* + * CFI FLASH driver setup + */ +/* timout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +#ifndef __ASSEMBLY__ +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_blash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ +

From: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com

Signed-off-by: Aldo Brett Cedillo Martinez aldo.cedillo@ti.com --- MAINTAINERS | 4 ++++ MAKEALL | 1 + Makefile | 3 +++ 3 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS index 7a13d28..384dda9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -798,6 +798,10 @@ Alex Z lart SA1100 dnp1110 SA1110

+Aldo Brett Cedillo Martinez aldo.cedillo@ti.com + + omap3_zoom3 ARM CORTEX-A8 (OMAP3xx SoC) + -------------------------------------------------------------------------

Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index 2527352..8ebeaad 100755 --- a/MAKEALL +++ b/MAKEALL @@ -650,6 +650,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_sdp3430 \ omap3_zoom1 \ omap3_zoom2 \ + omap3_zoom3 \ smdkc100 \ "

diff --git a/Makefile b/Makefile index c26e491..198ee67 100644 --- a/Makefile +++ b/Makefile @@ -3179,6 +3179,9 @@ omap3_zoom1_config : unconfig omap3_zoom2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3

+omap3_zoom3_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom3 logicpd omap3 + smdkc100_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx