st 26. 2. 2020 v 11:34 odesílatel Michal Simek michal.simek@xilinx.com napsal:

There is no real need to include full DT when only some nodes are enough to use. It will save some space.

Retested with FSBL for initial SoC setup. SPL didn't work.

Signed-off-by: Michal Simek michal.simek@xilinx.com

arch/arm/dts/zynq-cse-nor.dts | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts index 9710abadcf02..4030851eb36d 100644 --- a/arch/arm/dts/zynq-cse-nor.dts +++ b/arch/arm/dts/zynq-cse-nor.dts @@ -5,7 +5,6 @@

• Copyright (C) 2018 Xilinx, Inc.

*/ /dts-v1/; -#include "zynq-7000.dtsi"

/ { #address-cells = <1>; @@ -33,27 +32,21 @@ };

    amba: amba {

•           u-boot,dm-pre-reloc;
            compatible = "simple-bus";
            #address-cells = <1>;
            #size-cells = <1>;
  

•           interrupt-parent = <&intc>;
            ranges;
  
  

•           intc: interrupt-controller@f8f01000 {
  

•                   compatible = "arm,cortex-a9-gic";
  

•                   #interrupt-cells = <3>;
  

•                   interrupt-controller;
  

•                   reg = <0xF8F01000 0x1000>,
  

•                         <0xF8F00100 0x100>;
  

•           };
  

•           slcr: slcr@f8000000 {
  

•                   u-boot,dm-pre-reloc;
                    #address-cells = <1>;
                    #size-cells = <1>;
                    compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
                    reg = <0xF8000000 0x1000>;
                    ranges;
                    clkc: clkc@100 {
  

•                           u-boot,dm-pre-reloc;
                            #clock-cells = <1>;
                            compatible = "xlnx,ps7-clkc";
                            clock-output-names = "armpll", "ddrpll",
  

-- 2.25.1

Applied. M