Hi ,

I am trying to port u-Boot to a custom 8245 board using BDI2000 in the progress .

I tried using the facility of BDI to download code {U-boot.bin} using the HOST section of the configuration file {sp8240.cfg}. For this purpose do I have to make changes to address where u-boot is linked or what offset should I download. Just wondering how would BDI can place the code in memory when the RAM interface has been configured {timings etc}.

Also if I burn the Flash using BDI for u-boot.bin should I have to give address 0xfff00000 or 0xfff0 0100.

thanks Abhi