Hi Johan,

On 2022/9/4 19:04, Johan Jonker wrote:

Hi Kever,

Despite you marked this serie as "Rejected" this patch contains a normal sync from Linux and therefore can be applied independently. Could you a have a look at it again?

Please send the patches for sync dts with linux  by a new patch set.

Thanks,

- Kever

Kind regards,

Johan Jonker

On 7/9/22 20:50, Johan Jonker wrote:

...

Sync rk3066/rk3188 DT files from Linux. This is the state as of v5.18 in Linux + nfc node for MK808 rk3066a. CRU nodes now have a clock property. To prefend dtoc errors a fixed clock must also be included for tpl/spl in the rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker jbx6244@gmail.com

arch/arm/dts/rk3066a-mk808.dts | 18 ++++++++++++++++++ arch/arm/dts/rk3066a.dtsi | 3 ++- arch/arm/dts/rk3188-radxarock.dts | 3 +-- arch/arm/dts/rk3188.dtsi | 24 +++++++++++++++--------- arch/arm/dts/rk3xxx-u-boot.dtsi | 4 ++++ 5 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts index 667d57a4..cfa318a5 100644 --- a/arch/arm/dts/rk3066a-mk808.dts +++ b/arch/arm/dts/rk3066a-mk808.dts @@ -160,6 +160,24 @@ status = "okay"; };

+&nfc {

• #address-cells = <1>;
• #size-cells = <0>;
• status = "okay";
• nand@0 {

• reg = <0>;
  

• label = "rk-nand";
  

• nand-bus-width = <8>;
  

• nand-ecc-mode = "hw";
  

• nand-ecc-step-size = <1024>;
  

• nand-ecc-strength = <40>;
  

• nand-is-boot-medium;
  

• rockchip,boot-blks = <8>;
  

• rockchip,boot-ecc-strength = <24>;
  

• };

+};

• &pinctrl { usb-host { host_drv: host-drv {

diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi index c25b9695..de9915d9 100644 --- a/arch/arm/dts/rk3066a.dtsi +++ b/arch/arm/dts/rk3066a.dtsi @@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>;

• clocks = <&xin24m>;
  

• clock-names = "xin24m";
  

  rockchip,grf = <&grf>;

• #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,

diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts index e7138a4a..a9ed3cd2 100644 --- a/arch/arm/dts/rk3188-radxarock.dts +++ b/arch/arm/dts/rk3188-radxarock.dts @@ -6,7 +6,6 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include "rk3188.dtsi" -#include "rk3188-radxarock-u-boot.dtsi"

/ { model = "Radxa Rock"; @@ -25,7 +24,7 @@ compatible = "gpio-keys"; autorepeat;

• power {
  

• key-power {
  gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  linux,code = <KEY_POWER>;
  label = "GPIO Key Power";
  

diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi index 9a80f83a..cdd4a0bd 100644 --- a/arch/arm/dts/rk3188.dtsi +++ b/arch/arm/dts/rk3188.dtsi @@ -54,7 +54,7 @@ }; };

• cpu0_opp_table: opp_table0 {

• cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared;

@@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>;

• clocks = <&xin24m>;
  

• clock-names = "xin24m";
  

  rockchip,grf = <&grf>;

• #clock-cells = <1>; #reset-cells = <1>; };

@@ -223,7 +224,7 @@ #size-cells = <1>; ranges;

• gpio0: gpio0@2000a000 {
  

• gpio0: gpio@2000a000 {
  compatible = "rockchip,rk3188-gpio-bank0";
  reg = <0x2000a000 0x100>;
  interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
  

@@ -236,7 +237,7 @@ #interrupt-cells = <2>; };

• gpio1: gpio1@2003c000 {
  

• gpio1: gpio@2003c000 {
  compatible = "rockchip,gpio-bank";
  reg = <0x2003c000 0x100>;
  interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
  

@@ -249,7 +250,7 @@ #interrupt-cells = <2>; };

• gpio2: gpio2@2003e000 {
  

• gpio2: gpio@2003e000 {
  compatible = "rockchip,gpio-bank";
  reg = <0x2003e000 0x100>;
  interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
  

@@ -262,7 +263,7 @@ #interrupt-cells = <2>; };

• gpio3: gpio3@20080000 {
  

• gpio3: gpio@20080000 {
  compatible = "rockchip,gpio-bank";
  reg = <0x20080000 0x100>;
  interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
  

@@ -275,15 +276,15 @@ #interrupt-cells = <2>; };

• pcfg_pull_up: pcfg_pull_up {
  

• pcfg_pull_up: pcfg-pull-up {
  bias-pull-up;
  

  };

• pcfg_pull_down: pcfg_pull_down {
  

• pcfg_pull_down: pcfg-pull-down {
  bias-pull-down;
  

  };

• pcfg_pull_none: pcfg_pull_none {
  

• pcfg_pull_none: pcfg-pull-none {
  bias-disable;
  

  };

@@ -641,6 +642,11 @@ &grf { compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";

• io_domains: io-domains {

• compatible = "rockchip,rk3188-io-voltage-domain";
  

• status = "disabled";
  

• };
• usbphy: usbphy { compatible = "rockchip,rk3188-usb-phy"; #address-cells = <1>;

diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi index e67432fb..c77d1fae 100644 --- a/arch/arm/dts/rk3xxx-u-boot.dtsi +++ b/arch/arm/dts/rk3xxx-u-boot.dtsi @@ -33,3 +33,7 @@ &uart2 { clock-frequency = <24000000>; };

+&xin24m {

• u-boot,dm-pre-reloc;

+};