Hi ,

We are using U-Boot-1.1.3 on a custom MPC8349ADS board with 2 PCI buses configured in Host mode.We have 256 MB DDR2 in our board.

We have connected 8 DSPs on PCI bus 1. U-Boot is assigning base address for DSPs from 0x80000000 to 0x93800000.

We are able to access any location from 0x80000000 to 0x0x8FFFFFFF i.e first 256 MB using md command in U-BOOT. But when i try to access any location starting from 0x90000000 to 0x93800000(next 256 MB), U-Boot hangs :

=>md 0x90000000 90000000:

Even though PCI LAWBARs and Outbound window is configured for 512 MB starting from 0x80000000.

I am not able to understand why i am not able to access any location starting from 0x90000000. Please help me in as i have already wasted too much time in debugging this issue.

I am also attaching the U-Boot PCI settings:

We are Configuring PCI bus in Host mode with following settings: /* PCI window setting in include/configs/MPC8349ADS.h start */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */

#define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ /* PCI window setting in MPC8349ADS.h start */

PCI LAWBARas setting:

/* PCI LAWBARs setting in cpu/83xx/pci.c : start*/ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; /* base: 0x80000000 */ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;

pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; /* base: 0xe2000000 */ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; /* PCI LAWBARs setting in cpu/83xx/pci.c :end*/

PCI Outbound translation register setting: /* PCI1 mem space */ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; /* base: 0x80000000 */ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; /* base: 0x80000000 */ pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);

/* PCI1 IO space */ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);

/* * Configure PCI Inbound Translation Windows */

/* we need RAM mapped to PCI space for the devices to * access main memory */ pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);

hose->first_busno = 0; hose->last_busno = 0xff;

/* PCI memory space */ pci_set_region(hose->regions + 0, CFG_PCI1_MEM_BASE, /* base: 0x80000000 */ CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, /* Size is 512 MB */ PCI_REGION_MEM);

/* PCI IO space */ pci_set_region(hose->regions + 1, CFG_PCI1_IO_BASE, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);

/* System memory space */ pci_set_region(hose->regions + 2, CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);

hose->region_count = 3;

pci_setup_indirect(hose, (CFG_IMMRBAR+0x8300), (CFG_IMMRBAR+0x8304));

pci_register_hose(hose);

/* * Write to Command register */ reg16 = 0xff; dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);

/* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);

#ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose);

Thanks & Regards, Vivek Trivedi