Move the option to Kconfig renaming it to CONFIG_HAVE_GENERIC_BOARD.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Makefile | 2 +- README | 6 +++--- arch/Kconfig | 14 ++++++++++++++ arch/arc/config.mk | 3 --- arch/arm/config.mk | 3 --- arch/avr32/config.mk | 3 --- arch/blackfin/config.mk | 3 --- arch/m68k/config.mk | 3 --- arch/microblaze/config.mk | 1 - arch/mips/config.mk | 2 -- arch/nios2/config.mk | 2 -- arch/powerpc/config.mk | 3 --- arch/sandbox/config.mk | 3 --- arch/x86/config.mk | 3 --- doc/README.generic-board | 12 +++++++----- 15 files changed, 25 insertions(+), 38 deletions(-)

diff --git a/Makefile b/Makefile index 73e1362..f63748a 100644 --- a/Makefile +++ b/Makefile @@ -1163,7 +1163,7 @@ prepare2: prepare3 outputmakefile

prepare1: prepare2 $(version_h) $(timestamp_h) \ include/config/auto.conf -ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) +ifeq ($(CONFIG_HAVE_GENERIC_BOARD),) ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) @echo >&2 " Your architecture does not support generic board." @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file." diff --git a/README b/README index b0124d6..5d57eb9 100644 --- a/README +++ b/README @@ -4190,9 +4190,9 @@ Configuration Settings: to this new framework over time. Defining this will disable the arch/foo/lib/board.c file and use common/board_f.c and common/board_r.c instead. To use this option your architecture - must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in - its config.mk file). If you find problems enabling this option on - your board please report the problem and send patches! + must support it (i.e. must select HAVE_GENERIC_BOARD in arch/Kconfig). + If you find problems enabling this option on your board please report + the problem and send patches!

- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) This is set by OMAP boards for the max time that reset should diff --git a/arch/Kconfig b/arch/Kconfig index 3d419bc..cdd1662 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -1,3 +1,6 @@ +config HAVE_GENERIC_BOARD + bool + choice prompt "Architecture select" default SANDBOX @@ -5,34 +8,42 @@ choice config ARC bool "ARC architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD

config ARM bool "ARM architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL

config AVR32 bool "AVR32 architecture" + select HAVE_GENERIC_BOARD

config BLACKFIN bool "Blackfin architecture" + select HAVE_GENERIC_BOARD

config M68K bool "M68000 architecture" + select HAVE_GENERIC_BOARD

config MICROBLAZE bool "MicroBlaze architecture" + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL

config MIPS bool "MIPS architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD

config NDS32 bool "NDS32 architecture"

config NIOS2 bool "Nios II architecture" + select HAVE_GENERIC_BOARD

config OPENRISC bool "OpenRISC architecture" @@ -40,10 +51,12 @@ config OPENRISC config PPC bool "PowerPC architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL

config SANDBOX bool "Sandbox" + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL

config SH @@ -56,6 +69,7 @@ config SPARC config X86 bool "x86 architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL

endchoice diff --git a/arch/arc/config.mk b/arch/arc/config.mk index 4fcd407..04c034b 100644 --- a/arch/arc/config.mk +++ b/arch/arc/config.mk @@ -57,6 +57,3 @@ LDFLAGS_FINAL += -pie

# Load address for standalone apps CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000 - -# Support generic board on ARC -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 0667984..c005ce4 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -19,9 +19,6 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \ PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \ $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))

-# Support generic board on ARM -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_CPPFLAGS += -D__ARM__

# Choose between ARM/Thumb instruction sets diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk index 8252f59..469185e 100644 --- a/arch/avr32/config.mk +++ b/arch/avr32/config.mk @@ -9,9 +9,6 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := avr32-linux- endif

-# avr32 has generic board support -__HAVE_ARCH_GENERIC_BOARD := y - CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000

PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index 584b38b..7b17b75 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -20,9 +20,6 @@ CONFIG_BFIN_CPU := $(strip $(CONFIG_BFIN_CPU:"%"=%)) endif CONFIG_BFIN_BOOT_MODE := $(strip $(CONFIG_BFIN_BOOT_MODE:"%"=%))

-# Support generic board on Blackfin -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic

LDFLAGS_FINAL += --gc-sections diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index a629b68..3b3a7e8 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -11,9 +11,6 @@ endif

CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000

-# Support generic board on m68k -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_CPPFLAGS += -D__M68K__ PLATFORM_LDFLAGS += -n PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 2b817be..e7a3477 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -19,4 +19,3 @@ PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ ifeq ($(CONFIG_SPL_BUILD),) PLATFORM_CPPFLAGS += -fPIC endif -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 4dc88f4..52e28f2 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -43,8 +43,6 @@ PLATFORM_CPPFLAGS += $(cpuflags-y)

PLATFORM_CPPFLAGS += -D__MIPS__

-__HAVE_ARCH_GENERIC_BOARD := y - # # From Linux arch/mips/Makefile # diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index 9b7c56d..82bd887 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -17,5 +17,3 @@ PLATFORM_CPPFLAGS += -G0

LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections - -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index fec02f2..07b11c6 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -17,9 +17,6 @@ PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \ PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2 PLATFORM_LDFLAGS += -n

-# Support generic board on PPC -__HAVE_ARCH_GENERIC_BOARD := y - # # When cross-compiling on NetBSD, we have to define __PPC__ or else we # will pick up a va_list declaration that is incompatible with the diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 7b84f02..e477a84 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -16,9 +16,6 @@ PLATFORM_CPPFLAGS += $(shell sdl-config --cflags) endif endif

-# Support generic board on sandbox -__HAVE_ARCH_GENERIC_BOARD := y - cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \ -Wl,--start-group $(u-boot-main) -Wl,--end-group \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map diff --git a/arch/x86/config.mk b/arch/x86/config.mk index bb2da46..999143e 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -17,9 +17,6 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86) PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm PLATFORM_CPPFLAGS += -march=i386 -m32

-# Support generic board on x86 -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden

PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions -m elf_i386 diff --git a/doc/README.generic-board b/doc/README.generic-board index 37c1b03..bd8eae1 100644 --- a/doc/README.generic-board +++ b/doc/README.generic-board @@ -44,16 +44,18 @@ The following architectures are supported now:

arc arm + avr32 + blackfin + m68k + microblaze mips + nios2 powerpc sandbox x86

-If your architecture is not supported, you need to adjust your -arch/<arch>/config.mk file to include: - - __HAVE_ARCH_GENERIC_BOARD := y - +If your architecture is not supported, you need to select +HAVE_GENERIC_BOARD in arch/Kconfig and test it with a suitable board, as follows.

All the M68000 boards have switched to Generic Board. This file is no longer necessary.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

arch/m68k/lib/Makefile | 3 - arch/m68k/lib/board.c | 642 ------------------------------------------------- 2 files changed, 645 deletions(-) delete mode 100644 arch/m68k/lib/board.c

diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index d0e1a84..73d40bd 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -5,9 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += interrupts.o diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c deleted file mode 100644 index 9caff73..0000000 --- a/arch/m68k/lib/board.c +++ /dev/null @@ -1,642 +0,0 @@ -/* - * (C) Copyright 2003 - * Josef Baumgartner josef.baumgartner@telex.de - * - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <malloc.h> -#include <stdio_dev.h> -#include <linux/compiler.h> - -#include <asm/immap.h> - -#if defined(CONFIG_CMD_IDE) -#include <ide.h> -#endif -#if defined(CONFIG_CMD_SCSI) -#include <scsi.h> -#endif -#if defined(CONFIG_CMD_KGDB) -#include <kgdb.h> -#endif -#ifdef CONFIG_STATUS_LED -#include <status_led.h> -#endif -#include <net.h> -#include <serial.h> -#ifdef CONFIG_SYS_ALLOC_DPRAM -#include <commproc.h> -#endif -#include <version.h> - -#if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SYS_I2C) -#include <i2c.h> -#endif - -#ifdef CONFIG_CMD_SPI -#include <spi.h> -#endif - -#ifdef CONFIG_BITBANGMII -#include <miiphy.h> -#endif - -#include <nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -static char *failed = "*** failed ***\n"; - -#include <environment.h> - -extern ulong __init_end; -extern ulong __bss_end; - -#if defined(CONFIG_WATCHDOG) -# undef INIT_FUNC_WATCHDOG_INIT -# define INIT_FUNC_WATCHDOG_INIT watchdog_init, -# define WATCHDOG_DISABLE watchdog_disable - -extern int watchdog_init(void); -extern int watchdog_disable(void); -#else -# define INIT_FUNC_WATCHDOG_INIT /* undef */ -# define WATCHDOG_DISABLE /* undef */ -#endif /* CONFIG_WATCHDOG */ - -ulong monitor_flash_len; - -/************************************************************************ - * Utilities * - ************************************************************************ - */ - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependend #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t) (void); - -/************************************************************************ - * Init Utilities - ************************************************************************ - * Some of this code should be moved into the core functions, - * but let's get it working (again) first... - */ - -static int init_baudrate (void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - -/***********************************************************************/ - -static int init_func_ram (void) -{ - int board_type = 0; /* use dummy arg */ - puts ("DRAM: "); - - if ((gd->ram_size = initdram (board_type)) > 0) { - print_size (gd->ram_size, "\n"); - return (0); - } - puts (failed); - return (1); -} - -/***********************************************************************/ - -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) -static int init_func_i2c (void) -{ - puts ("I2C: "); -#ifdef CONFIG_SYS_I2C - i2c_init_all(); -#else - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - puts ("ready\n"); - return (0); -} -#endif - -#if defined(CONFIG_HARD_SPI) -static int init_func_spi (void) -{ - puts ("SPI: "); - spi_init (); - puts ("ready\n"); - return (0); -} -#endif - -/***********************************************************************/ - -/************************************************************************ - * Initialization sequence * - ************************************************************************ - */ - -init_fnc_t *init_sequence[] = { - get_clocks, - env_init, - init_baudrate, - serial_init, - console_init_f, - display_options, - checkcpu, - checkboard, -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) - init_func_i2c, -#endif -#if defined(CONFIG_HARD_SPI) - init_func_spi, -#endif - init_func_ram, -#if defined(CONFIG_SYS_DRAM_TEST) - testdram, -#endif /* CONFIG_SYS_DRAM_TEST */ - INIT_FUNC_WATCHDOG_INIT - NULL, /* Terminate this list */ -}; - - -/************************************************************************ - * - * This is the first part of the initialization sequence that is - * implemented in C, but still running from ROM. - * - * The main purpose is to provide a (serial) console interface as - * soon as possible (so we can see any error messages), and to - * initialize the RAM so that we can relocate the monitor code to - * RAM. - * - * Be aware of the restrictions: global data is read-only, BSS is not - * initialized, and stack space is limited to a few kB. - * - ************************************************************************ - */ - -void -board_init_f (ulong bootflag) -{ - bd_t *bd; - ulong len, addr, addr_sp; - ulong *paddr; - gd_t *id; - init_fnc_t **init_fnc_ptr; -#ifdef CONFIG_PRAM - ulong reg; -#endif - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - - /* - * Now that we have DRAM mapped and working, we can - * relocate the code and continue running from DRAM. - * - * Reserve memory at end of RAM for (top down in that order): - * - protected RAM - * - LCD framebuffer - * - monitor code - * - board info struct - */ - len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; - - addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; - -#ifdef CONFIG_LOGBUFFER - /* reserve kernel log buffer */ - addr -= (LOGBUFF_RESERVE); - debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); -#endif - -#ifdef CONFIG_PRAM - /* - * reserve protected RAM - */ - reg = getenv_ulong("pram", 10, CONFIG_PRAM); - addr -= (reg << 10); /* size is in kB */ - debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); -#endif /* CONFIG_PRAM */ - - /* round down to next 4 kB limit */ - addr &= ~(4096 - 1); - debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); - -#ifdef CONFIG_LCD -#ifdef CONFIG_FB_ADDR - gd->fb_base = CONFIG_FB_ADDR; -#else - /* reserve memory for LCD display (always full pages) */ - addr = lcd_setmem (addr); - gd->fb_base = addr; -#endif /* CONFIG_FB_ADDR */ -#endif /* CONFIG_LCD */ - - /* - * reserve memory for U-Boot code, data & bss - * round down to next 4 kB limit - */ - addr -= len; - addr &= ~(4096 - 1); - - debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); - - /* - * reserve memory for malloc() arena - */ - addr_sp = addr - TOTAL_MALLOC_LEN; - debug ("Reserving %dk for malloc() at: %08lx\n", - TOTAL_MALLOC_LEN >> 10, addr_sp); - - /* - * (permanently) allocate a Board Info struct - * and a permanent copy of the "global" data - */ - addr_sp -= sizeof (bd_t); - bd = (bd_t *) addr_sp; - gd->bd = bd; - debug ("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof (bd_t), addr_sp); - addr_sp -= sizeof (gd_t); - id = (gd_t *) addr_sp; - debug ("Reserving %zu Bytes for Global Data at: %08lx\n", - sizeof (gd_t), addr_sp); - - /* Reserve memory for boot params. */ - addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN; - bd->bi_boot_params = addr_sp; - debug ("Reserving %dk for boot parameters at: %08lx\n", - CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp); - - /* - * Finally, we set up a new (bigger) stack. - * - * Leave some safety gap for SP, force alignment on 16 byte boundary - * Clear initial stack frame - */ - addr_sp -= 16; - addr_sp &= ~0xF; - - paddr = (ulong *)addr_sp; - *paddr-- = 0; - *paddr-- = 0; - addr_sp = (ulong)paddr; - - debug ("Stack Pointer at: %08lx\n", addr_sp); - - /* - * Save local variables to board info struct - */ - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ - bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ -#ifdef CONFIG_SYS_INIT_RAM_ADDR - bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR; /* start of SRAM memory */ - bd->bi_sramsize = CONFIG_SYS_INIT_RAM_SIZE; /* size of SRAM memory */ -#endif - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ - - bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ - - WATCHDOG_RESET (); - bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ - bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ -#ifdef CONFIG_PCI - bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */ -#endif -#ifdef CONFIG_EXTRA_CLOCK - bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ - bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ - bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ -#endif - -#ifdef CONFIG_SYS_EXTBDINFO - strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); - strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version)); -#endif - - WATCHDOG_RESET (); - -#ifdef CONFIG_POST - post_bootmode_init(); - post_run (NULL, POST_ROM | post_bootmode_get(0)); -#endif - - WATCHDOG_RESET(); - - memcpy (id, (void *)gd, sizeof (gd_t)); - - debug ("Start relocate of code from %08x to %08lx\n", CONFIG_SYS_MONITOR_BASE, addr); - relocate_code (addr_sp, id, addr); - - /* NOTREACHED - jump_to_ram() does not return */ -} - -/************************************************************************ - * - * This is the next part if the initialization sequence: we are now - * running from RAM and have a "normal" C environment, i. e. global - * data can be written, BSS has been cleared, the stack size in not - * that critical any more, etc. - * - ************************************************************************ - */ -void board_init_r (gd_t *id, ulong dest_addr) -{ - char *s __maybe_unused; - bd_t *bd; - -#ifndef CONFIG_ENV_IS_NOWHERE - extern char * env_name_spec; -#endif -#ifndef CONFIG_SYS_NO_FLASH - ulong flash_size; -#endif - gd = id; /* initialize RAM version of global data */ - bd = gd->bd; - - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - - WATCHDOG_RESET (); - - gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; - - serial_initialize(); - - debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - - monitor_flash_len = (ulong)&__init_end - dest_addr; - -#if defined(CONFIG_NEEDS_MANUAL_RELOC) - /* - * We have to relocate the command table manually - */ - fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), - ll_entry_count(cmd_tbl_t, cmd)); -#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ - - /* there are some other pointer constants we must deal with */ -#ifndef CONFIG_ENV_IS_NOWHERE - env_name_spec += gd->reloc_off; -#endif - - WATCHDOG_RESET (); - -#ifdef CONFIG_LOGBUFFER - logbuff_init_ptrs (); -#endif -#ifdef CONFIG_POST - post_output_backlog (); - post_reloc (); -#endif - WATCHDOG_RESET(); - -#if 0 - /* instruction cache enabled in cpu_init_f() for faster relocation */ - icache_enable (); /* it's time to enable the instruction cache */ -#endif - - /* - * Setup trap handlers - */ - trap_init (CONFIG_SYS_SDRAM_BASE); - - /* The Malloc area is immediately below the monitor copy in DRAM */ - mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off - - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - -#if !defined(CONFIG_SYS_NO_FLASH) - puts ("Flash: "); - - if ((flash_size = flash_init ()) > 0) { -# ifdef CONFIG_SYS_FLASH_CHECKSUM - print_size (flash_size, ""); - /* - * Compute and print flash CRC if flashchecksum is set to 'y' - * - * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX - */ - if (getenv_yesno("flashchecksum") == 1) { - printf (" CRC: %08X", - crc32 (0, - (const unsigned char *) CONFIG_SYS_FLASH_BASE, - flash_size) - ); - } - putc ('\n'); -# else /* !CONFIG_SYS_FLASH_CHECKSUM */ - print_size (flash_size, "\n"); -# endif /* CONFIG_SYS_FLASH_CHECKSUM */ - } else { - puts (failed); - hang (); - } - - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */ - bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */ - bd->bi_flashoffset = 0; -#else /* CONFIG_SYS_NO_FLASH */ - bd->bi_flashsize = 0; - bd->bi_flashstart = 0; - bd->bi_flashoffset = 0; -#endif /* !CONFIG_SYS_NO_FLASH */ - - WATCHDOG_RESET (); - - /* initialize higher level parts of CPU like time base and timers */ - cpu_init_r (); - - WATCHDOG_RESET (); - -#ifdef CONFIG_SPI -# if !defined(CONFIG_ENV_IS_IN_EEPROM) - spi_init_f (); -# endif - spi_init_r (); -#endif - -#if defined(CONFIG_SYS_I2C) - /* Adjust I2C subsystem pointers after relocation */ - i2c_reloc_fixup(); -#endif - - /* relocate environment function pointers etc. */ - env_relocate (); - - WATCHDOG_RESET (); - -#if defined(CONFIG_PCI) - /* - * Do pci configuration - */ - pci_init (); -#endif - - /** leave this here (after malloc(), environment and PCI are working) **/ - /* Initialize stdio devices */ - stdio_init (); - - /* Initialize the jump table for applications */ - jumptable_init (); - - /* Initialize the console (after the relocation and devices init) */ - console_init_r (); - -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r (); -#endif - -#if defined(CONFIG_CMD_KGDB) - WATCHDOG_RESET (); - puts ("KGDB: "); - kgdb_init (); -#endif - - debug ("U-Boot relocated to %08lx\n", dest_addr); - - /* - * Enable Interrupts - */ - interrupt_init (); - - /* Must happen after interrupts are initialized since - * an irq handler gets installed - */ - timer_init(); - -#ifdef CONFIG_STATUS_LED - status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); -#endif - - udelay (20); - - /* Insert function pointers now that we have relocated the code */ - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - - WATCHDOG_RESET (); - -#if defined(CONFIG_CMD_DOC) - WATCHDOG_RESET (); - puts ("DOC: "); - doc_init (); -#endif - -#if defined(CONFIG_CMD_NAND) - WATCHDOG_RESET (); - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) - WATCHDOG_RESET(); -#if defined(FEC_ENET) - eth_init(bd); -#endif - puts ("Net: "); - eth_initialize (bd); -#endif - -#ifdef CONFIG_POST - post_run (NULL, POST_RAM | post_bootmode_get(0)); -#endif - -#if defined(CONFIG_CMD_PCMCIA) \ - && !defined(CONFIG_CMD_IDE) - WATCHDOG_RESET (); - puts ("PCMCIA:"); - pcmcia_init (); -#endif - -#if defined(CONFIG_CMD_IDE) - WATCHDOG_RESET (); - puts ("IDE: "); - ide_init (); -#endif - -#ifdef CONFIG_LAST_STAGE_INIT - WATCHDOG_RESET (); - /* - * Some parts can be only initialized if all others (like - * Interrupts) are up and running (i.e. the PC-style ISA - * keyboard). - */ - last_stage_init (); -#endif - -#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) - /* - * Export available size of memory for Linux, - * taking into account the protected RAM at top of memory - */ - { - ulong pram = 0; - char memsz[32]; - -#ifdef CONFIG_PRAM - pram = getenv_ulong("pram", 10, CONFIG_PRAM); -#endif -#ifdef CONFIG_LOGBUFFER - /* Also take the logbuffer into account (pram is in kB) */ - pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; -#endif - sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram); - setenv ("mem", memsz); - } -#endif - -#ifdef CONFIG_WATCHDOG - /* disable watchdog if environment is set */ - if ((s = getenv ("watchdog")) != NULL) { - if (strncmp (s, "off", 3) == 0) { - WATCHDOG_DISABLE (); - } - } -#endif /* CONFIG_WATCHDOG*/ - - - /* Initialization complete - start the monitor */ - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - WATCHDOG_RESET (); - main_loop (); - } - - /* NOTREACHED - no way out of command loop except booting */ -}

This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is not board-independent, handle it globally.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Kconfig | 2 +- arch/arm/cpu/armv7/exynos/Kconfig | 3 --- arch/arm/cpu/armv7/omap3/Kconfig | 3 --- arch/arm/mach-tegra/Kconfig | 3 --- arch/arm/mach-uniphier/Kconfig | 3 --- arch/x86/Kconfig | 3 --- board/amcc/canyonlands/Kconfig | 4 ---- board/ti/am335x/Kconfig | 3 --- configs/Linksprite_pcDuino3_fdt_defconfig | 1 - configs/am335x_igep0033_defconfig | 1 - configs/cm_fx6_defconfig | 1 - configs/cm_t335_defconfig | 1 - configs/mx6dlsabreauto_defconfig | 1 - configs/mx6qsabreauto_defconfig | 1 - configs/mx6qsabresd_defconfig | 1 - configs/mx6sxsabresd_defconfig | 1 - configs/nokia_rx51_defconfig | 1 - configs/pcm051_rev1_defconfig | 1 - configs/pcm051_rev3_defconfig | 1 - configs/pengwyn_defconfig | 1 - configs/pepper_defconfig | 1 - configs/rpi_2_defconfig | 1 - configs/rpi_defconfig | 1 - configs/s5p_goni_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/smdkc100_defconfig | 1 - configs/snapper9260_defconfig | 1 - configs/snapper9g20_defconfig | 1 - configs/stv0991_defconfig | 1 - include/configs/rcar-gen2-common.h | 2 -- 30 files changed, 1 insertion(+), 46 deletions(-)

diff --git a/Kconfig b/Kconfig index 8f96c94..b5968d7 100644 --- a/Kconfig +++ b/Kconfig @@ -54,7 +54,7 @@ config CC_OPTIMIZE_FOR_SIZE

config SYS_MALLOC_F bool "Enable malloc() pool before relocation" - default 0x400 + default y if DM help Before relocation memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 9e47ed3..bd7540a 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -80,9 +80,6 @@ config DM_SPI_FLASH config DM_GPIO default y

-config SYS_MALLOC_F - default y - source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index aa2ff46..1f96498 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -106,9 +106,6 @@ config DM_GPIO config DM_SERIAL default y if DM

-config SYS_MALLOC_F - default y if DM - config SYS_SOC default "omap3"

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index fccfd79..fce1c1d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -17,9 +17,6 @@ config TEGRA124

endchoice

-config SYS_MALLOC_F - default y - config SYS_MALLOC_F_LEN default 0x1800

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index b6dc75f..20e20a5 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -48,9 +48,6 @@ config DCC_MICRO_SUPPORT_CARD

endchoice

-config SYS_MALLOC_F - default y - config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 35d24e4..da27115 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -76,9 +76,6 @@ config DM_GPIO config DM_SERIAL default y

-config SYS_MALLOC_F - default y - config SYS_MALLOC_F_LEN default 0x800

diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig index c0dbd18..46efa7a 100644 --- a/board/amcc/canyonlands/Kconfig +++ b/board/amcc/canyonlands/Kconfig @@ -39,8 +39,4 @@ config DM config DM_SERIAL default y

-config SYS_MALLOC_F - bool - default y - endif diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index 8c45892..7cb006f 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -47,7 +47,4 @@ config DM_GPIO config DM_SERIAL default y if DM

-config SYS_MALLOC_F - default y if DM - endif diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig index 87dd38f..7690d1e 100644 --- a/configs/Linksprite_pcDuino3_fdt_defconfig +++ b/configs/Linksprite_pcDuino3_fdt_defconfig @@ -13,4 +13,3 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=122 CONFIG_DRAM_EMR1=4 -CONFIG_SYS_MALLOC_F=y diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig index a439298..7ff0a13 100644 --- a/configs/am335x_igep0033_defconfig +++ b/configs/am335x_igep0033_defconfig @@ -3,4 +3,3 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_ARM=y CONFIG_TARGET_AM335X_IGEP0033=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 00cbdd2..f10a5c2 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -5,4 +5,3 @@ CONFIG_TARGET_CM_FX6=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 31705f2..d189799 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -1,4 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_CM_T335=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index b3816ec..8bc5e8b 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -1,6 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_SYS_MALLOC_F=y CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index df09296..ba9e512 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -1,6 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_SYS_MALLOC_F=y CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index cad4281..1764b39 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -1,6 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y -CONFIG_SYS_MALLOC_F=y CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 12a9bdc..5c862cf 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -1,6 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y -CONFIG_SYS_MALLOC_F=y CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 48a1b29..20a51e1 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -4,4 +4,3 @@ CONFIG_TARGET_NOKIA_RX51=y CONFIG_DM=n CONFIG_DM_SERIAL=n CONFIG_DM_GPIO=n -CONFIG_SYS_MALLOC_F=y diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index a8b10d4..08075e7 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -2,4 +2,3 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_ARM=y CONFIG_TARGET_PCM051=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index ef307d9..56deb48 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -2,4 +2,3 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_ARM=y CONFIG_TARGET_PCM051=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 86f8bbb..6346b57 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -1,4 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_PENGWYN=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index 438d886..3b042ec 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -1,4 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_PEPPER=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 69723d5..3075321 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -1,3 +1,2 @@ CONFIG_ARM=y CONFIG_TARGET_RPI_2=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 1a5a8e2..9379cf0 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -1,3 +1,2 @@ CONFIG_ARM=y CONFIG_TARGET_RPI=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 5815667..618e590 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -2,4 +2,3 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" -CONFIG_SYS_MALLOC_F=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index a0e19ad..a216039 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -5,7 +5,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_DM=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" -CONFIG_SYS_MALLOC_F=y CONFIG_CROS_EC=y CONFIG_DM_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index 585fea6..041030f 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -2,4 +2,3 @@ CONFIG_ARM=y CONFIG_TARGET_SMDKC100=y CONFIG_ARCH_S5PC1XX=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" -CONFIG_SYS_MALLOC_F=y diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 9a0d0ad..576d9c5 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -5,4 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index 82f7a07..07a2643 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -5,4 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index 1c9ba88..e8cf311 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -1,7 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="stv0991" CONFIG_ARM=y CONFIG_TARGET_STV0991=y -CONFIG_SYS_MALLOC_F=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DM=y CONFIG_DM_SERIAL=y diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index e9ef7cc..c33f1cb 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD

-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* Support File sytems */ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION

Move arch/arm/include/asm/arch-bcm283x/* -> arch/arm/mach-bcm283x/include/mach/*

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Cc: Stephen Warren swarren@nvidia.com ---

arch/arm/mach-bcm283x/Kconfig | 2 +- .../{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/gpio.h | 0 .../{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/mbox.h | 0 .../{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/sdhci.h | 0 .../{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/timer.h | 0 .../{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/wdog.h | 0 drivers/mmc/bcm2835_sdhci.c | 4 ++-- 7 files changed, 3 insertions(+), 3 deletions(-) rename arch/arm/{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/gpio.h (100%) rename arch/arm/{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/mbox.h (100%) rename arch/arm/{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/sdhci.h (100%) rename arch/arm/{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/timer.h (100%) rename arch/arm/{include/asm/arch-bcm2835 => mach-bcm283x/include/mach}/wdog.h (100%)

diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index d5e09e8..b43f2d9 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -31,7 +31,7 @@ config SYS_VENDOR default "raspberrypi"

config SYS_SOC - default "bcm2835" + default "bcm283x"

config SYS_CONFIG_NAME default "rpi" if TARGET_RPI diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h similarity index 100% rename from arch/arm/include/asm/arch-bcm2835/gpio.h rename to arch/arm/mach-bcm283x/include/mach/gpio.h diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h similarity index 100% rename from arch/arm/include/asm/arch-bcm2835/mbox.h rename to arch/arm/mach-bcm283x/include/mach/mbox.h diff --git a/arch/arm/include/asm/arch-bcm2835/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h similarity index 100% rename from arch/arm/include/asm/arch-bcm2835/sdhci.h rename to arch/arm/mach-bcm283x/include/mach/sdhci.h diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h similarity index 100% rename from arch/arm/include/asm/arch-bcm2835/timer.h rename to arch/arm/mach-bcm283x/include/mach/timer.h diff --git a/arch/arm/include/asm/arch-bcm2835/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h similarity index 100% rename from arch/arm/include/asm/arch-bcm2835/wdog.h rename to arch/arm/mach-bcm283x/include/mach/wdog.h diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 92f7d89..4ec2968 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -39,8 +39,8 @@ #include <common.h> #include <malloc.h> #include <sdhci.h> -#include <asm/arch/timer.h> -#include <asm/arch-bcm2835/sdhci.h> +#include <mach/timer.h> +#include <mach/sdhci.h>

/* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000