Dear u-boot,
I'm about to cooperate more with you here in the U-Boot list and thought that introducing myself first would be in order.
My name is Timo Ketola. I work for a smallish (17 fellows) finnish company called Exertus (www.exertus.fi). I have a 25 year career on embedded systems. Seven last years I have designed boards with many kinds of ARM-chips and have adapted U-Boot into some of them.
Regarding U-Boot, I am now working with a i.MX25 based board. I'm looking forward to get my board adaptation into the mainline of U-Boot.
This is the first time for me to work with a community. Working practices in a community (git procedures etc.) are all new for me. So, I'll expect constructive critic on my forthcoming posts.
--
Timo
Dear Mike Frysinger,
On Thursday 12 April 2012 03:20:31 Timo Ketola wrote:
This is the first time for me to work with a community. Working practices in a community (git procedures etc.) are all new for me. So, I'll expect constructive critic on my forthcoming posts.
g'luck!
Heh, sounded reassuring ;-)
btw don't let some duds ward you off ;-)
-mike
Best regards, Marek Vasut
On 15.04.2012 11:11, Marek Vasut wrote:
btw don't let some duds ward you off ;-)
Reading a handful of technical lists I know what you mean, but, While I'm prepared for my fair share of impertinent feedback, all comments so far have been helpful and well-founded.
And I'd like to thank (should have in the first message) the community for the great product. It has much more value than a comparable closed source product even if it were ready made and complete.
--
Timo
Dear Timo Ketola,
On 15.04.2012 11:11, Marek Vasut wrote:
btw don't let some duds ward you off ;-)
Reading a handful of technical lists I know what you mean, but, While I'm prepared for my fair share of impertinent feedback, all comments so far have been helpful and well-founded.
Aww ... stop your yapping, don't even talk to me, you don't even understand anything ;-D
And I'd like to thank (should have in the first message) the community for the great product. It has much more value than a comparable closed source product even if it were ready made and complete.
Ok, on a more serious note, you're very welcome and we look forward to your contributions :-)
--
Timo
Best regards, Marek Vasut
participants (3)
-
Marek Vasut -
Mike Frysinger -
Timo Ketola