It is better to use an existing wait loop implementation.

Signed-off-by: Chris Brandt chris.brandt@renesas.com --- drivers/usb/host/r8a66597-hcd.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 28d2bc8454..7ae26b33fd 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -10,6 +10,7 @@ #include <console.h> #include <usb.h> #include <asm/io.h> +#include <linux/iopoll.h>

#include "r8a66597.h"

@@ -297,7 +298,6 @@ static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev, int timeout = 3000; #if defined(CONFIG_RZA_USB) u16 dcpctr; - int timeout2 = 10000; #endif u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;

@@ -308,13 +308,10 @@ static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev, #if defined(CONFIG_RZA_USB) dcpctr = r8a66597_read(r8a66597, DCPCTR); if ((dcpctr & PID) == PID_BUF) { - timeout2 = 10000; - while (!(dcpctr & BSTS)) { - dcpctr = r8a66597_read(r8a66597, DCPCTR); - if (timeout2-- < 0) { - printf("DCPCTR clear timeout!\n"); - break; - } + if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr, + dcpctr & BSTS, 1000) < 0) { + printf("DCPCTR BSTS timeout!\n"); + return -1; } } #endif