Hi Morten,

Morten wrotes on Montag, 4. Oktober 2004 12:40:

Hello !

I have exchanged the flash on my AT91RM9200DK with a AT49BV320C cfi flash, and done all needed mods to the config file, every thing seems ok except that it get the size of the flash incorectly.

It sayes that it is a 16x16 4m, 71 sector cfi complient flash, when it should be a 2097 x 16, 32m, 71 sector flash ?

Why should it be 2097 x 16, 32m? The datasheet says the flash is organized 2M x 16. This means 2M (= 2^21 = 2.097.152) Addresses each 16 Bit (= word) wide. And this is a size of 4 MByte.

size_ratio 1 port 16 bits chip 16 bits

...

Bank # 1: CFI conformant FLASH (16 x 16) Size: 4 MB in 71 Sectors

This means U-Boot has detected a flash that is connected to a 16 bit port (bus) and the flash chip itself has also a 16 bit wide interface.

The dirver seems working correctly to me.

Regards, Martin