The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a deadlock under certain traffic patterns causing the system to hang") is implemented via the PBI (pre-boot initialization code, typically attached to the RCW binary). This is because the work-around is easier to implement in PBI than in U-Boot itself.

It is still useful, however, for the 'errata' command to tell us whether the work-around has been applied. For A-004849, we can do this by verifying that the values in the specific registers that the work-around says to update.

Signed-off-by: Timur Tabi timur@freescale.com --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 63 +++++++++++++++++++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 3 + 2 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 2be192d..ccfad56 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -25,6 +25,65 @@ #include <linux/compiler.h> #include <asm/processor.h>

+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 +/* + * This work-around is implemented in PBI, so just check to see if the + * work-around was actually applied. To do this, we check for specific data + * at specific addresses in DCSR. + * + * Array offsets[] contains a list of offsets within DCSR. According to the + * erratum document, the value at each offset should be 2. + */ +static void check_erratum_a4849(uint32_t svr) +{ + void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000; + unsigned int i; + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + static const uint8_t offsets[] = { + 0x50, 0x54, 0x58, 0x90, 0x94, 0x98 + }; +#endif +#ifdef CONFIG_PPC_P4080 + static const uint8_t offsets[] = { + 0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac + }; +#endif + uint32_t x108; /* The value that should be at offset 0x108 */ + + for (i = 0; i < ARRAY_SIZE(offsets); i++) { + if (in_be32(dcsr + offsets[i]) != 2) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + } + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + x108 = 0x12; +#endif + +#ifdef CONFIG_PPC_P4080 + /* + * For P4080, the erratum document says that the value at offset 0x108 + * should be 0x12 on rev2, or 0x1c on rev3. + */ + if (SVR_MAJ(svr) == 2) + x108 = 0x12; + if (SVR_MAJ(svr) == 3) + x108 = 0x1c; +#endif + + if (in_be32(dcsr + 0x108) != x108) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + + /* Everything matches, so the erratum work-around was applied */ + + printf("Work-around for Erratum A004849 enabled\n"); +} +#endif + static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 @@ -137,6 +196,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 puts("Work-around for Erratum A004934 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 + /* This work-around is implemented in PBI, so just check for it */ + check_erratum_a4849(svr); +#endif return 0; }

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 03baaee..3bde0f4 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -343,6 +343,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849

#elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 @@ -375,6 +376,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849

#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 @@ -417,6 +419,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849

#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */