Use .env file for setting board related environment variables, in place of am62x_evm.h file. Except for BOOTENV settings, as config_distro_boot.env file doesn't exist.

Signed-off-by: Nikhil M Jain n-jain1@ti.com --- board/ti/am62x/am62x.env | 105 ++++++++++++++++++++++++++++++++++++ include/configs/am62x_evm.h | 43 --------------- 2 files changed, 105 insertions(+), 43 deletions(-) create mode 100644 board/ti/am62x/am62x.env

diff --git a/board/ti/am62x/am62x.env b/board/ti/am62x/am62x.env new file mode 100644 index 0000000000..3d4ab84fa3 --- /dev/null +++ b/board/ti/am62x/am62x.env @@ -0,0 +1,105 @@ +#define CFG_SYS_SDRAM_BASE1 0x880000000 + +loadaddr=0x82000000 +kernel_addr_r=0x82000000 +fdtaddr=0x88000000 +dtboaddr=0x89000000 +fdt_addr_r=0x88000000 +fdtoverlay_addr_r=0x89000000 +rdaddr=0x88080000 +ramdisk_addr_r=0x88080000 +scriptaddr=0x80000000 +pxefile_addr_r=0x80100000 +bootm_size=0x10000000 +boot_fdt=try + +mmcrootfstype=ext4 rootwait +finduuid=part uuid ${boot} ${bootpart} uuid +args_mmc=run finduuid;setenv bootargs console=${console} + ${optargs} + root=PARTUUID=${uuid} rw + rootfstype=${mmcrootfstype} +loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr +bootscript=echo Running bootscript from mmc${mmcdev} ...; + source ${loadaddr} +bootenvfile=uEnv.txt +importbootenv=echo Importing environment from mmc${mmcdev} ...; + env import -t ${loadaddr} ${filesize} +loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} +loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} +loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} +envboot=mmc dev ${mmcdev}; + if mmc rescan; then + echo SD/MMC found on device ${mmcdev}; + if run loadbootscript; then + run bootscript; + else + if run loadbootenv; then + echo Loaded env from ${bootenvfile}; + run importbootenv; + fi; + if test -n $uenvcmd; then + echo Running uenvcmd ...; + run uenvcmd; + fi; + fi; + fi; +mmcloados= + if test ${boot_fdt} = yes || test ${boot_fdt} = try; then + if run loadfdt; then + bootz ${loadaddr} - ${fdtaddr}; + else + if test ${boot_fdt} = try; then + bootz; + else + echo WARN: Cannot load the DT; + fi; + fi; + else + bootz; + fi; +mmcboot=mmc dev ${mmcdev}; + devnum=${mmcdev}; + devtype=mmc; + if mmc rescan; then + echo SD/MMC found on device ${mmcdev}; + if run loadimage; then + run args_mmc; + if test ${boot_fit} -eq 1; then + run run_fit; + else + run mmcloados; + fi; + fi; + fi; + +default_device_tree=k3-am625-sk.dtb +findfdt= + setenv name_fdt ${default_device_tree}; + setenv fdtfile ${name_fdt} +name_kern=Image +console=ttyS2,115200n8 +args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 + ${mtdparts} +run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} + +boot=mmc +mmcdev=1 +bootpart=1:2 +bootdir=/boot +rd_spec=- +init_mmc=run args_all args_mmc +get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt} +get_overlay_mmc= + fdt address ${fdtaddr}; + fdt resize 0x100000; + for overlay in $name_overlays; + do; + load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && + fdt apply ${dtboaddr}; + done; +get_kern_mmc=load mmc ${bootpart} ${loadaddr} + ${bootdir}/${name_kern} +get_fit_mmc=load mmc ${bootpart} ${addr_fit} + ${bootdir}/${name_fit} +partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} diff --git a/include/configs/am62x_evm.h b/include/configs/am62x_evm.h index 7fbefdece4..7bf07809b0 100644 --- a/include/configs/am62x_evm.h +++ b/include/configs/am62x_evm.h @@ -38,51 +38,8 @@ DISTRO_BOOT_DEV_PXE(func) \ DISTRO_BOOT_DEV_DHCP(func)

-#define PARTS_DEFAULT \ - /* Linux partitions */ \ - "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" - -/* U-Boot general configuration */ -#define EXTRA_ENV_AM625_BOARD_SETTINGS \ - "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - "findfdt=" \ - "setenv name_fdt ${default_device_tree};" \ - "setenv fdtfile ${name_fdt}\0" \ - "name_kern=Image\0" \ - "console=ttyS2,115200n8\0" \ - "args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 " \ - "${mtdparts}\0" \ - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" - -/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_AM625_BOARD_SETTINGS_MMC \ - "boot=mmc\0" \ - "mmcdev=1\0" \ - "bootpart=1:2\0" \ - "bootdir=/boot\0" \ - "rd_spec=-\0" \ - "init_mmc=run args_all args_mmc\0" \ - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \ - "fdt apply ${dtboaddr};" \ - "done;\0" \ - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ - "${bootdir}/${name_kern}\0" \ - "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \ - "${bootdir}/${name_fit}\0" \ - "partitions=" PARTS_DEFAULT - /* Incorporate settings into the U-Boot environment */ #define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - EXTRA_ENV_AM625_BOARD_SETTINGS \ - EXTRA_ENV_AM625_BOARD_SETTINGS_MMC \ BOOTENV

/* Now for the remaining common defines */