Hi,

On 07-03-15 15:05, Hans de Goede wrote:

The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors.

Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0.

Also see: http://www.merrii.com/en/pla_d.asp?id=163

Signed-off-by: Hans de Goede hdegoede@redhat.com

Ugh I forgot to update MAINTAINERS for this and the 2 other new boards (will I ever learn?). I will fix this in my personal tree.

Regards,

Hans

---

configs/Wits_Pro_A20_DKT_defconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 configs/Wits_Pro_A20_DKT_defconfig

diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig new file mode 100644 index 0000000..de42b3c --- /dev/null +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -0,0 +1,15 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-wits-pro-a20-dkt.dtb" +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:65000,le:159,ri:160,up:22,lo:15,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_VIDEO_VGA=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_DRAM_CLK=384 ++S:CONFIG_DRAM_ZQ=127 ++S:CONFIG_DRAM_EMR1=4