[U-Boot] u-boot for rsk7203

Hi nobuhiro san. Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203 the file lowlevel_init.S
defines PDCRL4_A
but do not ise it. So if the port are not set as Data bus, how the sysstem can boot?
Thanks a in advance

Hi, Fabio.
2010/7/14 Fabio Giovagnini fabio.giovagnini@aurion-tech.com:
Hi nobuhiro san. Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203 the file lowlevel_init.S
defines PDCRL4_A
but do not ise it. So if the port are not set as Data bus, how the sysstem can boot?
I dont have rsk7203 board now. It is scheduled that it is at hand next week. I will examine it next week.
Best regards, Nobuhiro

Hi nobuhiro san. I'have gone ahead on my board, derived from rks7203. Now the system boots and alse the NOR flash (mine is an SST) works properly. If you like we can stay in touch for the development
Best regards
In data venerdì 16 luglio 2010 08:31:55, Nobuhiro Iwamatsu ha scritto: : > Hi, Fabio.
2010/7/14 Fabio Giovagnini fabio.giovagnini@aurion-tech.com:
Hi nobuhiro san. Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203 the file lowlevel_init.S
defines PDCRL4_A
but do not ise it. So if the port are not set as Data bus, how the sysstem can boot?
I dont have rsk7203 board now. It is scheduled that it is at hand next week. I will examine it next week.
Best regards, Nobuhiro

Hi,
2010/7/19 Fabio Giovagnini fabio.giovagnini@aurion-tech.com:
Hi nobuhiro san. I'have gone ahead on my board, derived from rks7203. Now the system boots and alse the NOR flash (mine is an SST) works properly. If you like we can stay in touch for the development
I already fixed my rep. git://git.denx.de/u-boot-sh.git
Best regareds, Nobuhiro

There somewhere in the linux-sh galaxy something like that http://www.stlinux.com/u-boot/target-install?
Thanks a lot
In data venerdì 16 luglio 2010 08:31:55, Nobuhiro Iwamatsu ha scritto: : > Hi, Fabio.
2010/7/14 Fabio Giovagnini fabio.giovagnini@aurion-tech.com:
Hi nobuhiro san. Is it running really on rsk7203 u-boot?
in the directory board/renesas/rsk7203 the file lowlevel_init.S
defines PDCRL4_A
but do not ise it. So if the port are not set as Data bus, how the sysstem can boot?
I dont have rsk7203 board now. It is scheduled that it is at hand next week. I will examine it next week.
Best regards, Nobuhiro
participants (2)
-
Fabio Giovagnini
-
Nobuhiro Iwamatsu