[U-Boot] [PATCH] TOP9000: remove GENERATED_GBL_DATA_SIZE
Signed-off-by: Reinhard Meyer u-boot@emk-elektronik.de --- include/configs/top9000.h | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 1533a63..4606146 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -172,8 +172,7 @@ * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 0x4000 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM + 0x4000)
/* * NAND flash: 256 MB (optional)
Dear Reinhard Meyer,
In message 1289750886-23092-1-git-send-email-u-boot@emk-elektronik.de you wrote:
Signed-off-by: Reinhard Meyer u-boot@emk-elektronik.de
include/configs/top9000.h | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 1533a63..4606146 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -172,8 +172,7 @@
- leaving the correct space for initial global data structure above
- that address while providing maximum stack area below.
*/ -#define CONFIG_SYS_INIT_SP_ADDR \
- (ATMEL_BASE_SRAM + 0x4000 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM + 0x4000)
You should also adapt the comment.
Best regards,
Wolfgang Denk
participants (2)
-
Reinhard Meyer -
Wolfgang Denk