[U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash
From ae5af322e53d00d021f6d4aa39c6916e1d3e12b7 Mon Sep 17 00:00:00 2001
From: Alan Carvalho de Assis alan.assis@freescale.com Date: Sun, 5 Oct 2008 20:00:59 -0300 Subject: [PATCH] iMX31: Add support to iMX31PDK board boots from NAND Flash
This patch adds support to iMX31PDK board to boot directly from NAND Flash. In order to it works the previous patches (which reduces start.S size and copy NAND code to RAM) need be applied first.
Signed-off-by: Alan Carvalho de Assis alan.assis@freescale.com --- board/freescale/mx31pdk/lowlevel_init.S | 95 +++++++++++++++++++++++++++++- board/freescale/mx31pdk/u-boot.lds | 3 + include/configs/mx31pdk.h | 16 ++++-- 3 files changed, 105 insertions(+), 9 deletions(-)
diff --git a/board/freescale/mx31pdk/lowlevel_init.S b/board/freescale/mx31pdk/lowlevel_init.S index a94ea7f..71ab612 100644 --- a/board/freescale/mx31pdk/lowlevel_init.S +++ b/board/freescale/mx31pdk/lowlevel_init.S @@ -20,11 +20,98 @@ * MA 02111-1307 USA */
-/* - * This is just to keep the linker happy. - */ +#include <asm/arch/mx31-regs.h> + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm
.globl lowlevel_init lowlevel_init: - mov pc, lr + /* Store return address on the stack since lr is re-used in this file */ + /* and all other registers are re-used as well */ + str lr, [sp] + + /* Also setup the Peripheral Port Remap register inside the core */ + ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + + REG IPU_CONF, IPU_CONF_DI_EN + REG CCM_CCMR, 0x074B0BF5 + + DELAY 0x40000 + + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS + + /* Set up clock to 532MHz */ + REG CCM_PDR0, 0xFF871D58 + REG CCM_MPCTL, 0x0033280C + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) + + /* Set up CPLD on CS5 */ + REG CSCR_U(5), 0x0000D843 + REG CSCR_L(5), 0x22252521 + REG CSCR_A(5), 0x22220A00 + + /* Set up MX31 DDR Memory Controller */ + REG 0x43FAC26C, 0 /* SDCLK */ + REG 0x43FAC270, 0 /* CAS */ + REG 0x43FAC274, 0 /* RAS */ + REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */ + REG 0x43FAC284, 0 /* DQM3 */ + REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */ + REG 0x43FAC28C, 0 + REG 0x43FAC290, 0 + REG 0x43FAC294, 0 + REG 0x43FAC298, 0 + REG 0x43FAC29C, 0 + REG 0x43FAC2A0, 0 + REG 0x43FAC2A4, 0 + REG 0x43FAC2A8, 0 + REG 0x43FAC2AC, 0 + REG 0x43FAC2B0, 0 + REG 0x43FAC2B4, 0 + REG 0x43FAC2B8, 0 + REG 0x43FAC2BC, 0 + REG 0x43FAC2C0, 0 + REG 0x43FAC2C4, 0 + REG 0x43FAC2C8, 0 + REG 0x43FAC2CC, 0 + REG 0x43FAC2D0, 0 + REG 0x43FAC2D4, 0 + REG 0x43FAC2D8, 0 + REG 0x43FAC2DC, 0 + REG 0xB8001010, 0x00000004 + REG 0xB8001004, 0x006ac73a + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + REG 0xB8001000, 0x82226080 + REG 0x80000000, 0xDEADBEEF + REG 0xB8001010, 0x0000000c + + /* Copy from NAND to RAM */ + b nand_copy
diff --git a/board/freescale/mx31pdk/u-boot.lds b/board/freescale/mx31pdk/u-boot.lds index 1460adc..8602f3e 100644 --- a/board/freescale/mx31pdk/u-boot.lds +++ b/board/freescale/mx31pdk/u-boot.lds @@ -35,6 +35,9 @@ SECTIONS .text : { cpu/arm1136/start.o (.text) + board/freescale/mx31pdk/lowlevel_init.o (.text) + cpu/arm1136/mx31/nand_copy.o (.text) + . = 2K; /* lowlevel NAND needs to fit in 2KB of NFC buffer */ *(.text) }
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 6df1a00..d4362e3 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -38,6 +38,9 @@ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32768
+/* We are booting from NAND. Used to shrink start.S */ +#define CONFIG_BOOT_FROM_NAND 1 + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO
@@ -45,11 +48,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1
-/* No support for NAND boot for i.MX31 PDK yet, so we rely on some other - * program to initialize the SDRAM. - */ -#define CONFIG_SKIP_LOWLEVEL_INIT - /* * Size of malloc() pool */ @@ -132,6 +130,13 @@ #define CONFIG_CMDLINE_EDITING 1
/*----------------------------------------------------------------------- + * Early stack pointer + * + * Use internal SRAM memory as SP when booting from NAND (ie. to iMX NFC) + */ +#define CFG_INTERNAL_SRAM_STACK 0x1FFFFFF0 + +/*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below @@ -151,6 +156,7 @@ /* No NOR flash present */ #define CFG_NO_FLASH 1
+/* We can't save to Flash. Then place Environment nowhere */ #define CFG_ENV_IS_NOWHERE 1
#define CFG_ENV_SIZE (128 * 1024)
On 15:01 Tue 07 Oct , Alan Carvalho de Assis wrote:
From ae5af322e53d00d021f6d4aa39c6916e1d3e12b7 Mon Sep 17 00:00:00 2001
From: Alan Carvalho de Assis alan.assis@freescale.com Date: Sun, 5 Oct 2008 20:00:59 -0300 Subject: [PATCH] iMX31: Add support to iMX31PDK board boots from NAND Flash
This patch adds support to iMX31PDK board to boot directly from NAND Flash. In order to it works the previous patches (which reduces start.S size and copy NAND code to RAM) need be applied first.
Signed-off-by: Alan Carvalho de Assis alan.assis@freescale.com
board/freescale/mx31pdk/lowlevel_init.S | 95 +++++++++++++++++++++++++++++- board/freescale/mx31pdk/u-boot.lds | 3 + include/configs/mx31pdk.h | 16 ++++-- 3 files changed, 105 insertions(+), 9 deletions(-)
Please rebase against u-boot-arm/master otherwhise ACK execpt some whitespace see comment below
Best Regards, J.
diff --git a/board/freescale/mx31pdk/lowlevel_init.S b/board/freescale/mx31pdk/lowlevel_init.S index a94ea7f..71ab612 100644 --- a/board/freescale/mx31pdk/lowlevel_init.S +++ b/board/freescale/mx31pdk/lowlevel_init.S @@ -20,11 +20,98 @@
- MA 02111-1307 USA
*/
-/*
- This is just to keep the linker happy.
- */
+#include <asm/arch/mx31-regs.h>
+.macro REG reg, val
- ldr r2, =\reg
- ldr r3, =\val
- str r3, [r2]
+.endm
+.macro REG8 reg, val
- ldr r2, =\reg
- ldr r3, =\val
- strb r3, [r2]
+.endm
+.macro DELAY loops
- ldr r2, =\loops
+1:
- subs r2, r2, #1
- nop
- bcs 1b
+.endm
.globl lowlevel_init lowlevel_init:
- mov pc, lr
- /* Store return address on the stack since lr is re-used in this file */
- /* and all other registers are re-used as well */
- str lr, [sp]
- /* Also setup the Peripheral Port Remap register inside the core */
- ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
^^^^^^^^ please use tab
- mcr p15, 0, r0, c15, c2, 4
- REG IPU_CONF, IPU_CONF_DI_EN
- REG CCM_CCMR, 0x074B0BF5
- DELAY 0x40000
- REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
- REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
- /* Set up clock to 532MHz */
- REG CCM_PDR0, 0xFF871D58
- REG CCM_MPCTL, 0x0033280C
- REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
- /* Set up CPLD on CS5 */
- REG CSCR_U(5), 0x0000D843
- REG CSCR_L(5), 0x22252521
- REG CSCR_A(5), 0x22220A00
- /* Set up MX31 DDR Memory Controller */
- REG 0x43FAC26C, 0 /* SDCLK */
- REG 0x43FAC270, 0 /* CAS */
- REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
- REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
- REG 0x43FAC28C, 0
- REG 0x43FAC290, 0
- REG 0x43FAC294, 0
- REG 0x43FAC298, 0
- REG 0x43FAC29C, 0
- REG 0x43FAC2A0, 0
- REG 0x43FAC2A4, 0
- REG 0x43FAC2A8, 0
- REG 0x43FAC2AC, 0
- REG 0x43FAC2B0, 0
- REG 0x43FAC2B4, 0
- REG 0x43FAC2B8, 0
- REG 0x43FAC2BC, 0
- REG 0x43FAC2C0, 0
- REG 0x43FAC2C4, 0
- REG 0x43FAC2C8, 0
- REG 0x43FAC2CC, 0
- REG 0x43FAC2D0, 0
- REG 0x43FAC2D4, 0
- REG 0x43FAC2D8, 0
- REG 0x43FAC2DC, 0
- REG 0xB8001010, 0x00000004
- REG 0xB8001004, 0x006ac73a
- REG 0xB8001000, 0x92100000
- REG 0x80000f00, 0x12344321
- REG 0xB8001000, 0xa2100000
- REG 0x80000000, 0x12344321
- REG 0x80000000, 0x12344321
- REG 0xB8001000, 0xb2100000
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, 0x82226080
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
- /* Copy from NAND to RAM */
- b nand_copy
diff --git a/board/freescale/mx31pdk/u-boot.lds b/board/freescale/mx31pdk/u-boot.lds index 1460adc..8602f3e 100644 --- a/board/freescale/mx31pdk/u-boot.lds +++ b/board/freescale/mx31pdk/u-boot.lds @@ -35,6 +35,9 @@ SECTIONS .text : { cpu/arm1136/start.o (.text)
^^ please use tab
board/freescale/mx31pdk/lowlevel_init.o (.text)
^^
cpu/arm1136/mx31/nand_copy.o (.text)
^^
. = 2K; /* lowlevel NAND needs to fit in 2KB of NFC buffer */
^^
*(.text)
^^
}
Best Regards, J.
Hi Jean,
On Wed, 2008-10-22 at 11:59 +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 15:01 Tue 07 Oct , Alan Carvalho de Assis wrote:
From ae5af322e53d00d021f6d4aa39c6916e1d3e12b7 Mon Sep 17 00:00:00 2001
From: Alan Carvalho de Assis alan.assis@freescale.com Date: Sun, 5 Oct 2008 20:00:59 -0300 Subject: [PATCH] iMX31: Add support to iMX31PDK board boots from NAND Flash
This patch adds support to iMX31PDK board to boot directly from NAND Flash. In order to it works the previous patches (which reduces start.S size and copy NAND code to RAM) need be applied first.
Signed-off-by: Alan Carvalho de Assis alan.assis@freescale.com
board/freescale/mx31pdk/lowlevel_init.S | 95 +++++++++++++++++++++++++++++- board/freescale/mx31pdk/u-boot.lds | 3 + include/configs/mx31pdk.h | 16 ++++-- 3 files changed, 105 insertions(+), 9 deletions(-)
Please rebase against u-boot-arm/master otherwhise ACK execpt some whitespace see comment below
Best Regards, J.
diff --git a/board/freescale/mx31pdk/lowlevel_init.S b/board/freescale/mx31pdk/lowlevel_init.S index a94ea7f..71ab612 100644 --- a/board/freescale/mx31pdk/lowlevel_init.S +++ b/board/freescale/mx31pdk/lowlevel_init.S @@ -20,11 +20,98 @@
- MA 02111-1307 USA
*/
-/*
- This is just to keep the linker happy.
- */
+#include <asm/arch/mx31-regs.h>
+.macro REG reg, val
- ldr r2, =\reg
- ldr r3, =\val
- str r3, [r2]
+.endm
+.macro REG8 reg, val
- ldr r2, =\reg
- ldr r3, =\val
- strb r3, [r2]
+.endm
+.macro DELAY loops
- ldr r2, =\loops
+1:
- subs r2, r2, #1
- nop
- bcs 1b
+.endm
.globl lowlevel_init lowlevel_init:
- mov pc, lr
- /* Store return address on the stack since lr is re-used in this file */
- /* and all other registers are re-used as well */
- str lr, [sp]
- /* Also setup the Peripheral Port Remap register inside the core */
- ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
^^^^^^^^please use tab
- mcr p15, 0, r0, c15, c2, 4
- REG IPU_CONF, IPU_CONF_DI_EN
- REG CCM_CCMR, 0x074B0BF5
- DELAY 0x40000
- REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
- REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
- /* Set up clock to 532MHz */
- REG CCM_PDR0, 0xFF871D58
- REG CCM_MPCTL, 0x0033280C
- REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
- /* Set up CPLD on CS5 */
- REG CSCR_U(5), 0x0000D843
- REG CSCR_L(5), 0x22252521
- REG CSCR_A(5), 0x22220A00
- /* Set up MX31 DDR Memory Controller */
- REG 0x43FAC26C, 0 /* SDCLK */
- REG 0x43FAC270, 0 /* CAS */
- REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
- REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
- REG 0x43FAC28C, 0
- REG 0x43FAC290, 0
- REG 0x43FAC294, 0
- REG 0x43FAC298, 0
- REG 0x43FAC29C, 0
- REG 0x43FAC2A0, 0
- REG 0x43FAC2A4, 0
- REG 0x43FAC2A8, 0
- REG 0x43FAC2AC, 0
- REG 0x43FAC2B0, 0
- REG 0x43FAC2B4, 0
- REG 0x43FAC2B8, 0
- REG 0x43FAC2BC, 0
- REG 0x43FAC2C0, 0
- REG 0x43FAC2C4, 0
- REG 0x43FAC2C8, 0
- REG 0x43FAC2CC, 0
- REG 0x43FAC2D0, 0
- REG 0x43FAC2D4, 0
- REG 0x43FAC2D8, 0
- REG 0x43FAC2DC, 0
- REG 0xB8001010, 0x00000004
- REG 0xB8001004, 0x006ac73a
- REG 0xB8001000, 0x92100000
- REG 0x80000f00, 0x12344321
- REG 0xB8001000, 0xa2100000
- REG 0x80000000, 0x12344321
- REG 0x80000000, 0x12344321
- REG 0xB8001000, 0xb2100000
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, 0x82226080
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
- /* Copy from NAND to RAM */
- b nand_copy
diff --git a/board/freescale/mx31pdk/u-boot.lds b/board/freescale/mx31pdk/u-boot.lds index 1460adc..8602f3e 100644 --- a/board/freescale/mx31pdk/u-boot.lds +++ b/board/freescale/mx31pdk/u-boot.lds @@ -35,6 +35,9 @@ SECTIONS .text : { cpu/arm1136/start.o (.text)
^^please use tab
board/freescale/mx31pdk/lowlevel_init.o (.text)^^
cpu/arm1136/mx31/nand_copy.o (.text)^^
. = 2K; /* lowlevel NAND needs to fit in 2KB of NFC buffer */^^*(.text)^^}
Best Regards, J.
I can't rebase [PATCH 3/3] on u-boot-arm/master because it applies over Magnus Lilja's patch "i.MX31: Add basic support for Freescale's i.MX31 PDK board." (968614d8c3f17eb834838de9a390ef4879fb1e77)
Can you please pull this patch from u-boot-arm/testing to u-boot-arm/master ?
I rebased [PATCH 1-2/3] correctly, but will re-post them when I rebase everything.
Best Regards,
Alan
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, 0x82226080
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
- /* Copy from NAND to RAM */
- b nand_copy
diff --git a/board/freescale/mx31pdk/u-boot.lds b/board/freescale/mx31pdk/u-boot.lds index 1460adc..8602f3e 100644 --- a/board/freescale/mx31pdk/u-boot.lds +++ b/board/freescale/mx31pdk/u-boot.lds @@ -35,6 +35,9 @@ SECTIONS .text : { cpu/arm1136/start.o (.text)
^^please use tab
board/freescale/mx31pdk/lowlevel_init.o (.text)^^
cpu/arm1136/mx31/nand_copy.o (.text)^^
. = 2K; /* lowlevel NAND needs to fit in 2KB of NFC buffer */^^*(.text)^^}
Best Regards, J.
I can't rebase [PATCH 3/3] on u-boot-arm/master because it applies over Magnus Lilja's patch "i.MX31: Add basic support for Freescale's i.MX31 PDK board." (968614d8c3f17eb834838de9a390ef4879fb1e77)
Can you please pull this patch from u-boot-arm/testing to u-boot-arm/master ?
No the patch need to be rebased first.
Magnus could you rebase it? It will save me times
Best Regards, J.
I can't rebase [PATCH 3/3] on u-boot-arm/master because it applies over Magnus Lilja's patch "i.MX31: Add basic support for Freescale's i.MX31 PDK board." (968614d8c3f17eb834838de9a390ef4879fb1e77)
Can you please pull this patch from u-boot-arm/testing to u-boot-arm/master ?
No the patch need to be rebased first.
Magnus could you rebase it? It will save me times
I've updated the patch and it now almost compiles. There's a problem at the last link stage where gnu-ld complains about multiple __udivsi3 definitions and incompatible EABI formats (see below, modulo gmail wrapping).
I can compile the imx31_litekit just fine and that board is very similar to the initial mx31pdk board.
Any ideas on what may be causing this?
/Magnus
UNDEF_SYM=`arm-none-linux-gnueabi-objdump -x board/freescale/mx31pdk/libmx31pdk.a lib_generic/libgeneric.a lib_generic/lzma/liblzma.a board/freescale/common/libfreescale.a cpu/arm1136/libarm1136.a cpu/arm1136/mx31/libmx31.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a | \ sed -n -e 's/.*(__u_boot_cmd_.*)/-u\1/p'|sort|uniq`;\ cd /opt/git/u-boot && arm-none-linux-gnueabi-ld -Bstatic -T /opt/git/u-boot/board/freescale/mx31pdk/u-boot.lds -Ttext 0x87f00000 $UNDEF_SYM cpu/arm1136/start.o \ --start-group lib_generic/libgeneric.a lib_generic/lzma/liblzma.a board/freescale/common/libfreescale.a cpu/arm1136/libarm1136.a cpu/arm1136/mx31/libmx31.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a net/libnet.a disk/libdisk.a drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a drivers/dma/libdma.a drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a drivers/mtd/nand/libnand.a drivers/mtd/nand_legacy/libnand_legacy.a drivers/mtd/onenand/libonenand.a drivers/mtd/spi/libspi_flash.a drivers/net/libnet.a drivers/net/phy/libphy.a drivers/net/sk98lin/libsk98lin.a drivers/pci/libpci.a drivers/pcmcia/libpcmcia.a drivers/spi/libspi.a drivers/rtc/librtc.a drivers/serial/libserial.a drivers/usb/libusb.a drivers/video/libvideo.a common/libcommon.a libfdt/libfdt.a api/libapi.a post/libpost.a board/freescale/mx31pdk/libmx31pdk.a --end-group -L /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2 -lgcc \ -Map u-boot.map -o u-boot /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv': /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/gcc/config/arm/lib1funcs.asm:730: multiple definition of `__udivsi3' lib_arm/libarm.a(_udivsi3.o):/opt/git/u-boot/lib_arm/_udivsi3.S:17: first defined here arm-none-linux-gnueabi-ld: Warning: size of symbol `__udivsi3' changed from 152 in lib_arm/libarm.a(_udivsi3.o) to 496 in /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_clz.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_clz.o) /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' make: *** [u-boot] Error 1
Dear Magnus,
In message 59b21cf20810221148u7afd8e19h148b496234b79274@mail.gmail.com you wrote:
I've updated the patch and it now almost compiles. There's a problem at the last link stage where gnu-ld complains about multiple __udivsi3 definitions and incompatible EABI formats (see below, modulo gmail wrapping).
Try this patch which I posted today: ARM: Use do_div() instead of division for "long long".
Best regards,
Wolfgang Denk
Wolfgang,
2008/10/22 Wolfgang Denk wd@denx.de:
Dear Magnus,
In message 59b21cf20810221148u7afd8e19h148b496234b79274@mail.gmail.com you wrote:
I've updated the patch and it now almost compiles. There's a problem at the last link stage where gnu-ld complains about multiple __udivsi3 definitions and incompatible EABI formats (see below, modulo gmail wrapping).
Try this patch which I posted today: ARM: Use do_div() instead of division for "long long".
That patch doesn't seem to touch any files that are involved in building i.MX31 boards. I might try the equivalent change though. Although it is a bit puzzling that I can build the i.MX31 Litekit board with the same toolchain.
/Magnus
2008/10/22 Magnus Lilja lilja.magnus@gmail.com:
Wolfgang,
2008/10/22 Wolfgang Denk wd@denx.de:
Dear Magnus,
In message 59b21cf20810221148u7afd8e19h148b496234b79274@mail.gmail.com you wrote:
I've updated the patch and it now almost compiles. There's a problem at the last link stage where gnu-ld complains about multiple __udivsi3 definitions and incompatible EABI formats (see below, modulo gmail wrapping).
Try this patch which I posted today: ARM: Use do_div() instead of division for "long long".
That patch doesn't seem to touch any files that are involved in building i.MX31 boards. I might try the equivalent change though. Although it is a bit puzzling that I can build the i.MX31 Litekit board with the same toolchain.
Ok, I've found what's triggering this. The PDK board has CONFIG_MX31_CLK32=32768 while Litekit has CONIFG_MX31_CLK32=32000. That difference nowadays causes problems when linking, I suppose that happened after the merging of CONFIG_MX31_TIMER_HIGH_PRECISION.
Changing the TICK_TO_TIME macro in arm1176/mx31/interrupts.c to a construction that uses do_div() solves the problem.
I don't have the PDK schematics here but since I decided to set CLK32 to 32768 I suppose the board uses that frequency.
I haven't tried my new patch on real hardware yet, but I'll do that tomorrow and post a patch (without the do_div() fix though, perhaps someone else can do that?).
/Magnus
Magnus,
--- On Wed, 10/22/08, Magnus Lilja lilja.magnus@gmail.com wrote:
From: Magnus Lilja lilja.magnus@gmail.com Subject: Re: [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash To: "Wolfgang Denk" wd@denx.de Cc: u-boot@lists.denx.de, "Alan Carvalho de Assis" alan.assis@freescale.com Date: Wednesday, October 22, 2008, 4:52 PM 2008/10/22 Magnus Lilja lilja.magnus@gmail.com:
Wolfgang,
2008/10/22 Wolfgang Denk wd@denx.de:
Dear Magnus,
In message
59b21cf20810221148u7afd8e19h148b496234b79274@mail.gmail.com you wrote:
I've updated the patch and it now almost
compiles. There's a problem
at the last link stage where gnu-ld complains
about multiple __udivsi3
definitions and incompatible EABI formats (see
below, modulo gmail
wrapping).
Try this patch which I posted today: ARM: Use do_div() instead of division for
"long long".
That patch doesn't seem to touch any files that
are involved in
building i.MX31 boards. I might try the equivalent
change though.
Although it is a bit puzzling that I can build the
i.MX31 Litekit
board with the same toolchain.
Ok, I've found what's triggering this. The PDK board has CONFIG_MX31_CLK32=32768 while Litekit has CONIFG_MX31_CLK32=32000. That difference nowadays causes problems when linking, I suppose that happened after the merging of CONFIG_MX31_TIMER_HIGH_PRECISION.
Changing the TICK_TO_TIME macro in arm1176/mx31/interrupts.c to a construction that uses do_div() solves the problem.
I don't have the PDK schematics here but since I decided to set CLK32 to 32768 I suppose the board uses that frequency.
Yes, I confirmed with the schematics. There is a 32768kHz crystal connected to the PMIC that drives the MX31 clock.
Regards,
Fabio Estevam
I haven't tried my new patch on real hardware yet, but I'll do that tomorrow and post a patch (without the do_div() fix though, perhaps someone else can do that?).
/Magnus _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Yes, I confirmed with the schematics. There is a 32768kHz crystal connected to the PMIC that drives the MX31 clock.
Regards,
Fabio Estevam
I haven't tried my new patch on real hardware yet, but I'll do that tomorrow and post a patch (without the do_div() fix though, perhaps someone else can do that?).
Ok, the patches have been posted now. The first one is a quick workaround for the div-problem, if someone has a better solution please use that instead. The second one is my updated basic i.MX31 PDK patch, now rebased and tested on hardware using a JTAG debugger to load it.
Regards, Magnus
participants (6)
-
Alan Carvalho de Assis -
Alan Carvalho de Assis -
Fabio Estevam -
Jean-Christophe PLAGNIOL-VILLARD -
Magnus Lilja -
Wolfgang Denk