[U-Boot-Users] Pull Request for u-boot-mpc86xx.git

Wolfgang,
I have now built, tested, debugged, and fixed a couple problems that were present in the v1.3.2-rc1 candidate for the MPC8610HPCD board. With these patchs below, both the MPC8610HPCD and MPC8641HPCN boards build and boot, and the sbc8641d builds (I can't test it).
Please pick these up for the v1.3.2 release.
Thanks, jdl
The following changes since commit b6f29c84c208a091f95a10cbc9852d729659ba20: Jean-Christophe PLAGNIOL-VILLARD (1): s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
are available in the git repository at:
git://www.denx.de/git/u-boot-mpc86xx.git master
Jean-Christophe PLAGNIOL-VILLARD (2): mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_l\ aw' mpc86xx: Fix unused variable 'config' and 'immap'
Jon Loeliger (5): 86xx: Convert sbc8641d to use libfdt. 8610HPCD: Fix typos in two PCI setup registers. 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. 86xx: Fix GUR PCI config registers properly. 8610HPCD: Document the flashbank selection switches.
board/freescale/mpc8610hpcd/mpc8610hpcd.c | 7 ++- board/freescale/mpc8641hpcn/mpc8641hpcn.c | 24 +++-------- board/sbc8641d/sbc8641d.c | 41 +++++++++++++------- cpu/mpc86xx/Makefile | 17 ++++++-- cpu/mpc86xx/cpu.c | 61 ----------------------------- cpu/mpc86xx/cpu_init.c | 1 + cpu/mpc86xx/fdt.c | 35 ++++++++++++++++ cpu/mpc86xx/spd_sdram.c | 10 +++-- doc/README.mpc8610hpcd | 6 +++ include/asm-ppc/immap_86xx.h | 12 ++++-- include/configs/MPC8610HPCD.h | 2 +- include/configs/sbc8641d.h | 10 +--- 12 files changed, 110 insertions(+), 116 deletions(-) create mode 100644 cpu/mpc86xx/fdt.c

In message 47BDAF26.5020304@freescale.com you wrote:
Wolfgang,
I have now built, tested, debugged, and fixed a couple problems that were present in the v1.3.2-rc1 candidate for the MPC8610HPCD board. With these patchs below, both the MPC8610HPCD and MPC8641HPCN boards build and boot, and the sbc8641d builds (I can't test it).
Please pick these up for the v1.3.2 release.
Thanks, jdl
The following changes since commit b6f29c84c208a091f95a10cbc9852d729659ba20: Jean-Christophe PLAGNIOL-VILLARD (1): s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
are available in the git repository at:
git://www.denx.de/git/u-boot-mpc86xx.git master
Jean-Christophe PLAGNIOL-VILLARD (2): mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_l\ aw' mpc86xx: Fix unused variable 'config' and 'immap'
Jon Loeliger (5): 86xx: Convert sbc8641d to use libfdt. 8610HPCD: Fix typos in two PCI setup registers. 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. 86xx: Fix GUR PCI config registers properly. 8610HPCD: Document the flashbank selection switches.
Done, thanks.
Best regards,
Wolfgang Denk
participants (2)
-
Jon Loeliger
-
Wolfgang Denk