[U-Boot-Users] how to initramfs
I´m a little confused! What´s the difference between initramfs and initrd?
How can I create a runable initramfs for my linux Kernel?
Where can I found an example for a rootfs (2.6.10)?
Is a initramfs or initrd essential for a linux prompt?
Because at the moment my serial output shows only this:
U-BOOT# bootm 50040000 ## Booting image at 50040000 ... Image Name: NS9750 Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1074991 Bytes = 1 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK OK
Starting kernel ...
-- View this message in context: http://www.nabble.com/how+to+initramfs-t1667406.html#a4518657 Sent from the Uboot - Users forum at Nabble.com.
In message 4518657.post@talk.nabble.com you wrote:
I´m a little confused! What´s the difference between initramfs and initrd?
And what has this to do with U-Boot?
How can I create a runable initramfs for my linux Kernel?
And what has this to do with U-Boot?
Where can I found an example for a rootfs (2.6.10)?
And what has this to do with U-Boot?
Is a initramfs or initrd essential for a linux prompt?
And what has this to do with U-Boot?
Best regards,
Wolfgang Denk
Nothing, but I thought someone could give me good advice to this issue. -- View this message in context: http://www.nabble.com/how+to+initramfs-t1667406.html#a4519495 Sent from the Uboot - Users forum at Nabble.com.
participants (2)
-
Hurricane555 -
Wolfgang Denk