[PATCH] video: add opt out option for VIDEO_BBP selection
Enable all BPP options by default to avoid empty video console output (this was the case before commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional")). But also support optional selection of only required VIDEO_BBP settings.
Signed-off-by: Anatolij Gustschin agust@denx.de --- drivers/video/Kconfig | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 50ab3650ee..62217fda08 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -35,9 +35,21 @@ config BACKLIGHT_GPIO it understands the standard device tree (leds/backlight/gpio-backlight.txt)
+config VIDEO_BPP_OPT_OUT + bool "Support manual selection of video console BPP" + depends on DM_VIDEO + help + Enabling this option allows manual selection of the required + VIDEO_BPPxx configuration. By default all BPP options are + enabled to avoid empty console output. Some boards do not use + all BPP options and want to avoid dead code to reduce binary + image size. Let them opt out and select the needed BPP in the + board defconfig file. + config VIDEO_BPP8 bool "Support 8-bit-per-pixel displays" depends on DM_VIDEO + default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 8-bit-per-pixel display. Enabling this will include code to support this display. Without @@ -47,6 +59,7 @@ config VIDEO_BPP8 config VIDEO_BPP16 bool "Support 16-bit-per-pixel displays" depends on DM_VIDEO + default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 16-bit-per-pixel display. Enabling this will include code to support this display. Without @@ -56,7 +69,7 @@ config VIDEO_BPP16 config VIDEO_BPP32 bool "Support 32-bit-per-pixel displays" depends on DM_VIDEO - default y if X86 + default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without
On Mon, Feb 03, 2020 at 10:48:10PM +0100, Anatolij Gustschin wrote:
Enable all BPP options by default to avoid empty video console output (this was the case before commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional")). But also support optional selection of only required VIDEO_BBP settings.
Signed-off-by: Anatolij Gustschin agust@denx.de
drivers/video/Kconfig | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 50ab3650ee..62217fda08 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -35,9 +35,21 @@ config BACKLIGHT_GPIO it understands the standard device tree (leds/backlight/gpio-backlight.txt)
+config VIDEO_BPP_OPT_OUT
- bool "Support manual selection of video console BPP"
- depends on DM_VIDEO
- help
Enabling this option allows manual selection of the requiredVIDEO_BPPxx configuration. By default all BPP options areenabled to avoid empty console output. Some boards do not useall BPP options and want to avoid dead code to reduce binaryimage size. Let them opt out and select the needed BPP in theboard defconfig file.config VIDEO_BPP8 bool "Support 8-bit-per-pixel displays" depends on DM_VIDEO
- default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 8-bit-per-pixel display. Enabling this will include code to support this display. Without
@@ -47,6 +59,7 @@ config VIDEO_BPP8 config VIDEO_BPP16 bool "Support 16-bit-per-pixel displays" depends on DM_VIDEO
- default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 16-bit-per-pixel display. Enabling this will include code to support this display. Without
@@ -56,7 +69,7 @@ config VIDEO_BPP16 config VIDEO_BPP32 bool "Support 32-bit-per-pixel displays" depends on DM_VIDEO
- default y if X86
- default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without
I think this is more complex than it needs to be, honestly. The old behavior was that all of these options were essentially "default y" but it also wasn't possible to remove them (in some cases?). Now that we can let boards pick what they want, I think we should just go back to the old behavior of in essence "default y" (and they already have depends on DM_VIDEO). Thanks!
On Tue, 4 Feb 2020 11:49:59 -0500 Tom Rini trini@konsulko.com wrote: ...
config VIDEO_BPP32 bool "Support 32-bit-per-pixel displays" depends on DM_VIDEO
- default y if X86
- default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without
I think this is more complex than it needs to be, honestly. The old behavior was that all of these options were essentially "default y" but it also wasn't possible to remove them (in some cases?). Now that we can let boards pick what they want, I think we should just go back to the old behavior of in essence "default y" (and they already have depends on DM_VIDEO). Thanks!
you mean we can go with default y if !VIDEO_BPP_OPT_OUT ?
-- Anatolij
Viele Grüße,
Anatolij Gustschin
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-50 Fax: +49-8142-66989-80 Email: agust@denx.de
On Tue, Feb 04, 2020 at 06:19:39PM +0100, Anatolij Gustschin wrote:
On Tue, 4 Feb 2020 11:49:59 -0500 Tom Rini trini@konsulko.com wrote: ...
config VIDEO_BPP32 bool "Support 32-bit-per-pixel displays" depends on DM_VIDEO
- default y if X86
- default y if DM_VIDEO && !VIDEO_BPP_OPT_OUT help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without
I think this is more complex than it needs to be, honestly. The old behavior was that all of these options were essentially "default y" but it also wasn't possible to remove them (in some cases?). Now that we can let boards pick what they want, I think we should just go back to the old behavior of in essence "default y" (and they already have depends on DM_VIDEO). Thanks!
you mean we can go with default y if !VIDEO_BPP_OPT_OUT
I mean we don't need VIDEO_BPP_OPT_OUT as a symbol. All of the VIDEO_BPPx options should just be default y and boards can disable as desired. Thanks!
participants (2)
-
Anatolij Gustschin -
Tom Rini