In message 47F3F98010FF784EBEE6526EAAB078D1024F8108@tq-mailsrv.tq-net.de you wrote:

This patch supports two serial consoles on boards with a MPC5xxx CPU. The console could be switchd during runtime by setting stdin, stdout and stderr to the desired serial interface (serial0 or serial1). Which PSCs are used for the console is definded by CONFIG_PSC_CONSOLE and CONFIG_PSC_CONSOLE2. For further Information see README.serial_multi

Signed-of-by: Martin Krause martin.krause@tqs.de

CHANGELOG:

• Add support for CONFIG_SERIAL_MULTI on MPC5xxx Patch by Martin Krause, 8 Jun 2006

Sorry, but this patch conflicts with recent changes that also add support for alternative console ports on MPC5200 systems. Also, please try to avoids code like this which is ugly and unreadable - try using an index:

#if defined(CONFIG_SERIAL_MULTI) #if CONFIG_PSC_CONSOLE2 == 1 #define PSC_BASE2 MPC5XXX_PSC1 #elif CONFIG_PSC_CONSOLE2 == 2 #define PSC_BASE2 MPC5XXX_PSC2 #elif CONFIG_PSC_CONSOLE2 == 3 #define PSC_BASE2 MPC5XXX_PSC3 #elif defined(CONFIG_MGT5100) #error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3 #elif CONFIG_PSC_CONSOLE2 == 4 #define PSC_BASE2 MPC5XXX_PSC4 #elif CONFIG_PSC_CONSOLE2 == 5 #define PSC_BASE2 MPC5XXX_PSC5 #elif CONFIG_PSC_CONSOLE2 == 6 #define PSC_BASE2 MPC5XXX_PSC6 #else #error CONFIG_PSC_CONSOLE2 must be in 1 ... 6 #endif #endif /* CONFIG_SERIAL_MULTI */

Please clean up adn resubmit.

Best regards,

Wolfgang Denk