[PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
Thanks, Michal
Michal Simek (2): arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform arm64: zynqmp: Use zynqmp_virt platform
configs/avnet_ultra96_rev1_defconfig | 90 -------------- configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------ .../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 ----------------- configs/xilinx_zynqmp_virt_defconfig | 28 ++++- configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 -------- .../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 --------------- .../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 ----------- .../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ---------- configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 -------------- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 ----------------- configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 -------------- configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 --------------- configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ---------------- configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 --------------- configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 --------- configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 --------------- 25 files changed, 26 insertions(+), 2208 deletions(-) delete mode 100644 configs/avnet_ultra96_rev1_defconfig delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
These options are taken from zcu102/104 platforms. Also use OF_SEPARATE instead of OF_BOARD. Maybe at some point this option will be taken back but as of now board detection is not ready.
export DEVICE_TREE="zynqmp-zcu102-revA" make xilinx_zynqmp_virt_defconfig make -j
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/xilinx_zynqmp_virt_defconfig | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index c7e365d009ab..90e8c75d29c2 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -16,10 +16,13 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y +CONFIG_CMD_BOOTMENU=y CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_BIND=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y CONFIG_CMD_FPGA_LOADBP=y @@ -29,14 +32,16 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SDRAM=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_BOARD=y CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y @@ -53,7 +58,9 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y CONFIG_I2C_MUX=y @@ -65,29 +72,37 @@ CONFIG_I2C_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_ISSI=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHY_MARVELL=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y CONFIG_PHY_TI=y CONFIG_PHY_VITESSE=y +CONFIG_PHY_XILINX_GMII2RGMII=y CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_ZYNQ_SERIAL=y CONFIG_SPI=y +CONFIG_ZYNQ_SPI=y CONFIG_ZYNQMP_GQSPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y @@ -101,4 +116,12 @@ CONFIG_USB_GADGET_MANUFACTURER="Xilinx" CONFIG_USB_GADGET_VENDOR_NUM=0x03FD CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 CONFIG_USB_FUNCTION_THOR=y +CONFIG_USB_ETHER=y +CONFIG_USB_ETH_CDC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_WDT=y +CONFIG_WDT_CDNS=y +CONFIG_SPL_GZIP=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Decrease amount of the similar defconfigs and use generic one instead. The change was declared by commit 4b37c13dc353 ("arm64: zynqmp: Introduce virtual defconfig") and this patch removes configs for the most of the boards. Utra96/zcu100/zcu102/zcu102 and ZynqMP based System controllers *a2197*. have been also boot tested to make sure that funcionality remains the same.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/avnet_ultra96_rev1_defconfig | 90 -------------- configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------ .../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 ----------------- configs/xilinx_zynqmp_virt_defconfig | 1 + configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 -------- .../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 --------------- .../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 ----------- .../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ---------- configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 -------------- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 ----------------- configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 -------------- configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 --------------- configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ---------------- configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 --------------- configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 --------- configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 --------------- 25 files changed, 1 insertion(+), 2206 deletions(-) delete mode 100644 configs/avnet_ultra96_rev1_defconfig delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig deleted file mode 100644 index 43aacf322ba3..000000000000 --- a/configs/avnet_ultra96_rev1_defconfig +++ /dev/null @@ -1,90 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff010000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_BOOTMENU=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_POWEROFF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="avnet-ultra96-rev1" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -# CONFIG_NETDEVICES is not set -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQ_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_ETHER=y -CONFIG_USB_ETH_CDC=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_WDT=y -CONFIG_WDT_CDNS=y -CONFIG_SPL_GZIP=y -CONFIG_OF_LIBFDT_OVERLAY=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig deleted file mode 100644 index 0e6d8b518ad5..000000000000 --- a/configs/xilinx_zynqmp_a2197_revA_defconfig +++ /dev/null @@ -1,113 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" -CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-g-a2197-00-revA zynqmp-p-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_OF_LIBFDT_OVERLAY=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig deleted file mode 100644 index faf7e45a9aec..000000000000 --- a/configs/xilinx_zynqmp_e_a2197_00_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-e-a2197-00-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig deleted file mode 100644 index abef223df8e2..000000000000 --- a/configs/xilinx_zynqmp_g_a2197_00_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-g-a2197-00-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig deleted file mode 100644 index db5eccc436a4..000000000000 --- a/configs/xilinx_zynqmp_m_a2197_01_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-01-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig deleted file mode 100644 index 9228ce186e6a..000000000000 --- a/configs/xilinx_zynqmp_m_a2197_02_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-02-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig b/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig deleted file mode 100644 index af2ab307d8f1..000000000000 --- a/configs/xilinx_zynqmp_m_a2197_03_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-03-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig b/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig deleted file mode 100644 index f206be8a3145..000000000000 --- a/configs/xilinx_zynqmp_p_a2197_00_revA_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-p-a2197-00-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 90e8c75d29c2..4047475d3c11 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -42,6 +42,7 @@ CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu216-revA" CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig deleted file mode 100644 index f79d803d3225..000000000000 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -# CONFIG_SPL_FS_FAT is not set -# CONFIG_SPL_LIBDISK_SUPPORT is not set -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -# CONFIG_CMD_NET is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1232-revA" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SPL_DM=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_MISC=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig deleted file mode 100644 index bc3d0dfe2201..000000000000 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -# CONFIG_SPL_FS_FAT is not set -# CONFIG_SPL_LIBDISK_SUPPORT is not set -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -# CONFIG_CMD_NET is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1254-revA" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SPL_DM=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_MISC=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig deleted file mode 100644 index 62c373051543..000000000000 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_MISC=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_HS200_SUPPORT=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig deleted file mode 100644 index 5216a5cd98f3..000000000000 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_MISC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig deleted file mode 100644 index 92cfe22d16a1..000000000000 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_MISC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig deleted file mode 100644 index d53a0366e536..000000000000 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ /dev/null @@ -1,87 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff010000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_BOOTMENU=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_POWEROFF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -# CONFIG_NETDEVICES is not set -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQ_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USB_ETHER=y -CONFIG_USB_ETH_CDC=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_SPL_GZIP=y -CONFIG_OF_LIBFDT_OVERLAY=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig deleted file mode 100644 index 0948a04af9e1..000000000000 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-rev1.0" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_GPIO_HOG=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_IO_VOLTAGE=y -CONFIG_MMC_UHS_SUPPORT=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig deleted file mode 100644 index e94064ffabbd..000000000000 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_GPIO_HOG=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig deleted file mode 100644 index 62b66f55f6bd..000000000000 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ /dev/null @@ -1,111 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_GPIO_HOG=y -CONFIG_XILINX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig deleted file mode 100644 index 84b714a3256d..000000000000 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ /dev/null @@ -1,92 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig deleted file mode 100644 index 76b1f7e2b945..000000000000 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ /dev/null @@ -1,96 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revC" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig deleted file mode 100644 index 3fb48cb3c21d..000000000000 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_THOR_DOWNLOAD=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu106-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03FD -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig deleted file mode 100644 index 231bf521d1f2..000000000000 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ /dev/null @@ -1,94 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu111-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig deleted file mode 100644 index 9d7efe0ca5f0..000000000000 --- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -# CONFIG_SPL_FS_FAT is not set -# CONFIG_SPL_LIBDISK_SUPPORT is not set -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -# CONFIG_CMD_NET is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revA" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SPL_DM=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_MISC=y -# CONFIG_MMC is not set -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig deleted file mode 100644 index 87d486702851..000000000000 --- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig +++ /dev/null @@ -1,59 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -# CONFIG_SPL_FS_FAT is not set -# CONFIG_SPL_LIBDISK_SUPPORT is not set -CONFIG_DEBUG_UART=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_NET is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revB" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_CLK_ZYNQMP=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_MISC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_PHY_XILINX_GMII2RGMII=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zcu216_revA_defconfig b/configs/xilinx_zynqmp_zcu216_revA_defconfig deleted file mode 100644 index 14a3d84a2d46..000000000000 --- a/configs/xilinx_zynqmp_zcu216_revA_defconfig +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_ATF=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_BIND=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FPGA_LOADBP=y -CONFIG_CMD_FPGA_LOADP=y -CONFIG_CMD_FPGA_LOAD_SECURE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu216-revA" -CONFIG_ENV_IS_IN_FAT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_CLK_ZYNQMP=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 -CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y -CONFIG_SPI_FLASH_ISSI=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_FIXED=y -CONFIG_PHY_GIGE=y -CONFIG_MII=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_SPI=y -CONFIG_ZYNQMP_GQSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to "force" everybody to properly pass DEVICE_TREE via command line. I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops? 1. I can remove this configuration but it will be only one at the end that's why not a good solution. 2. Add generic option to run some commands before tests like export DEVICE_TREE above 3. provide different options for SPL/full u-boot how OF_SEPARATE/OF_BOARD is handled.
Thanks for your suggestions, Michal
On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to "force" everybody to properly pass DEVICE_TREE via command line. I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops?
- I can remove this configuration but it will be only one at the end
that's why not a good solution. 2. Add generic option to run some commands before tests like export DEVICE_TREE above 3. provide different options for SPL/full u-boot how OF_SEPARATE/OF_BOARD is handled.
So, for CI are you wanting to test most device trees, or just one? Are we able to run one of these device trees via QEMU? If we can run the virt defconfig via qemu, we should just update/extend that stanza in the CI files to set DEVICE_TREE and exclude building it from the normal jobs. If we can't run via qemu then yes, something like option #2 and we set DEVICE_TREE in one job and export it if set in the build job.
On 10. 12. 19 14:56, Tom Rini wrote:
On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to "force" everybody to properly pass DEVICE_TREE via command line. I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops?
- I can remove this configuration but it will be only one at the end
that's why not a good solution. 2. Add generic option to run some commands before tests like export DEVICE_TREE above 3. provide different options for SPL/full u-boot how OF_SEPARATE/OF_BOARD is handled.
So, for CI are you wanting to test most device trees, or just one?
All zynqmp dtses are built by default.
Are we able to run one of these device trees via QEMU?
zynqmp is covered just by buildman not by pytest. I have this on my todo list for some time but there will be other issues with mainline qemu to do so.
If we can run the virt defconfig via qemu, we should just update/extend that stanza in the CI files to set DEVICE_TREE and exclude building it from the normal jobs.
Based on next generation Xilinx Versal where we use OF_BOARD qemu is generated DT for model self to ensure that only stuff which are emulated are provided to SW. Logic for dt selection is quite simply. https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c... But Versal is not using SPL and SPL needs initial DT. Also standard Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community driven effort.
At the end of the day I would like to use the same functionality across boards. It means full u-boot should check one fixed location for DT first with priority. For this OF_SEPARATE can be also used because board_fdt_blob_setup can be overwritten for these cases too. https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
If we can't run via qemu then yes, something like option #2 and we set DEVICE_TREE in one job and export it if set in the build job.
It means for qemu there is no real need to build dts from source tree at all. Let me look at #2 for CI.
Thanks, Michal
On Tue, Dec 10, 2019 at 04:24:09PM +0100, Michal Simek wrote:
On 10. 12. 19 14:56, Tom Rini wrote:
On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to "force" everybody to properly pass DEVICE_TREE via command line. I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops?
- I can remove this configuration but it will be only one at the end
that's why not a good solution. 2. Add generic option to run some commands before tests like export DEVICE_TREE above 3. provide different options for SPL/full u-boot how OF_SEPARATE/OF_BOARD is handled.
So, for CI are you wanting to test most device trees, or just one?
All zynqmp dtses are built by default.
Right, but for what I thought you're saying the real use is, you pass just a single device tree, right? If so, do you think we should loop over each, or just build one?
Are we able to run one of these device trees via QEMU?
zynqmp is covered just by buildman not by pytest. I have this on my todo list for some time but there will be other issues with mainline qemu to do so.
OK, so something to improve for the future, and after we handle this "today" problem.
If we can run the virt defconfig via qemu, we should just update/extend that stanza in the CI files to set DEVICE_TREE and exclude building it from the normal jobs.
Based on next generation Xilinx Versal where we use OF_BOARD qemu is generated DT for model self to ensure that only stuff which are emulated are provided to SW. Logic for dt selection is quite simply. https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c... But Versal is not using SPL and SPL needs initial DT. Also standard Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community driven effort.
At the end of the day I would like to use the same functionality across boards. It means full u-boot should check one fixed location for DT first with priority. For this OF_SEPARATE can be also used because board_fdt_blob_setup can be overwritten for these cases too. https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
If we can't run via qemu then yes, something like option #2 and we set DEVICE_TREE in one job and export it if set in the build job.
It means for qemu there is no real need to build dts from source tree at all. Let me look at #2 for CI.
OK, thanks!
On 10. 12. 19 16:30, Tom Rini wrote:
On Tue, Dec 10, 2019 at 04:24:09PM +0100, Michal Simek wrote:
On 10. 12. 19 14:56, Tom Rini wrote:
On Tue, Dec 10, 2019 at 01:40:42PM +0100, Michal Simek wrote:
Hi Tom,
On 09. 12. 19 16:19, Michal Simek wrote:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
This series will require some changes in CI loops because right now I didn't setup default device tree (CONFIG_DEFAULT_DEVICE_TREE) to "force" everybody to properly pass DEVICE_TREE via command line. I can't use OF_BOARD because then SPL is built without DT at all.
How do you think I should handle it for CI loops?
- I can remove this configuration but it will be only one at the end
that's why not a good solution. 2. Add generic option to run some commands before tests like export DEVICE_TREE above 3. provide different options for SPL/full u-boot how OF_SEPARATE/OF_BOARD is handled.
So, for CI are you wanting to test most device trees, or just one?
All zynqmp dtses are built by default.
Right, but for what I thought you're saying the real use is, you pass just a single device tree, right? If so, do you think we should loop over each, or just build one?
Are we able to run one of these device trees via QEMU?
zynqmp is covered just by buildman not by pytest. I have this on my todo list for some time but there will be other issues with mainline qemu to do so.
OK, so something to improve for the future, and after we handle this "today" problem.
If we can run the virt defconfig via qemu, we should just update/extend that stanza in the CI files to set DEVICE_TREE and exclude building it from the normal jobs.
Based on next generation Xilinx Versal where we use OF_BOARD qemu is generated DT for model self to ensure that only stuff which are emulated are provided to SW. Logic for dt selection is quite simply. https://github.com/Xilinx/u-boot-xlnx/blob/master/arch/arm/mach-versal/cpu.c... But Versal is not using SPL and SPL needs initial DT. Also standard Xilinx boot flow on zynq/zynqmp is not using SPL and SPL is community driven effort.
At the end of the day I would like to use the same functionality across boards. It means full u-boot should check one fixed location for DT first with priority. For this OF_SEPARATE can be also used because board_fdt_blob_setup can be overwritten for these cases too. https://gitlab.denx.de/u-boot/u-boot/blob/master/lib/fdtdec.c#L1190
If we can't run via qemu then yes, something like option #2 and we set DEVICE_TREE in one job and export it if set in the build job.
It means for qemu there is no real need to build dts from source tree at all. Let me look at #2 for CI.
OK, thanks!
I have look at it again and there are other strange things. When you select CONFIG_SPL_FIT_GENERATOR then there is no reason to generate u-boot.img (because you want to replace this by your generator) or append dtb behind u-boot.bin (because default option is already setup in fit format).
CAT u-boot-dtb.bin MKIMAGE u-boot.img MKIMAGE u-boot-dtb.img COPY u-boot.bin LD u-boot.elf MKIMAGE u-boot.itb
Regarding travis. just c&p. What about just this?
diff --git a/.travis.yml b/.travis.yml index 5da046ca7ed5..4cef12e18370 100644 --- a/.travis.yml +++ b/.travis.yml @@ -118,6 +118,9 @@ script: # use clang only do one configuration. - if [[ "${BUILDMAN}" != "" ]]; then ret=0; + if [[ "${ENV}" != "" ]]; then + export eval `echo ${ENV}`; + fi; tools/buildman/buildman -P -E ${BUILDMAN} ${OVERRIDE}|| ret=$?; if [[ $ret -ne 0 && $ret -ne 129 ]]; then tools/buildman/buildman -sdeP ${BUILDMAN};
And then job like this - name: "buildman ZynqMP Virt" env: - ENV="DEVICE_TREE=zynqmp-zcu100-revC" - BUILDMAN="xilinx_zynqmp_virt"
Or do you see any smarter way how this can be done?
Thanks, Michal
po 9. 12. 2019 v 16:19 odesílatel Michal Simek michal.simek@xilinx.com napsal:
Hi,
over years a lot of new Xilinx ZynqMP board have been added to U-Boot with corresponding defconfigs. Also a lot of drivers have been moved to DM that we can make one generic configuration with one defconfig. Nand still needs to be validated that's why dc2/dc3 are not moved yet.
Boards can be build like this: export DEVICE_TREE="avnet-ultra96-rev1" make xilinx_zynqmp_virt_defconfig make -j
Series depends on patches sent before that's why here is full tree: https://github.com/michalsimek/u-boot/tree/20191209-mainline
Thanks, Michal
Michal Simek (2): arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform arm64: zynqmp: Use zynqmp_virt platform
configs/avnet_ultra96_rev1_defconfig | 90 -------------- configs/xilinx_zynqmp_a2197_revA_defconfig | 113 ------------------ .../xilinx_zynqmp_e_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_g_a2197_00_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_01_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_02_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_m_a2197_03_revA_defconfig | 111 ----------------- .../xilinx_zynqmp_p_a2197_00_revA_defconfig | 111 ----------------- configs/xilinx_zynqmp_virt_defconfig | 28 ++++- configs/xilinx_zynqmp_zc1232_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zc1254_revA_defconfig | 50 -------- .../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 95 --------------- .../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 68 ----------- .../xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 61 ---------- configs/xilinx_zynqmp_zcu100_revC_defconfig | 87 -------------- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revA_defconfig | 112 ----------------- configs/xilinx_zynqmp_zcu102_revB_defconfig | 111 ----------------- configs/xilinx_zynqmp_zcu104_revA_defconfig | 92 -------------- configs/xilinx_zynqmp_zcu104_revC_defconfig | 96 --------------- configs/xilinx_zynqmp_zcu106_revA_defconfig | 105 ---------------- configs/xilinx_zynqmp_zcu111_revA_defconfig | 94 --------------- configs/xilinx_zynqmp_zcu1275_revA_defconfig | 50 -------- configs/xilinx_zynqmp_zcu1275_revB_defconfig | 59 --------- configs/xilinx_zynqmp_zcu216_revA_defconfig | 95 --------------- 25 files changed, 26 insertions(+), 2208 deletions(-) delete mode 100644 configs/avnet_ultra96_rev1_defconfig delete mode 100644 configs/xilinx_zynqmp_a2197_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_e_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_g_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_01_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_02_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_m_a2197_03_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_p_a2197_00_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1232_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1254_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig delete mode 100644 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu100_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu102_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu104_revC_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu106_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu111_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revA_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu1275_revB_defconfig delete mode 100644 configs/xilinx_zynqmp_zcu216_revA_defconfig
-- 2.24.0
Applied but with default DT setup because I couldn't find proper setup to pass CI loop. Something to take a look later.
M
participants (3)
-
Michal Simek -
Michal Simek -
Tom Rini