[U-Boot] mpc85xx, mpc86xx: device tree model
Hi Tom,
I am seeing following type of build warnings for MMC.
+===================== WARNING ====================== +This board does not use CONFIG_DM_MMC. Please update +the board to use CONFIG_DM_MMC before the v2019.04 release. +Failure to update by the deadline may result in board removal. +See doc/driver-model/MIGRATION.txt for more info.
Considering "number" of powerpc platform are not migrated to deice tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 time-frame (considering rc4 is on 18th march). v2019.07 looks feasible for removing all warning which includes CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI, CONFIG_DM_SPI_FLASH and CONFIG_DM_MMC.
is there any plan of removing boards which don't have CONFIG_DM_MMC for v2019.04?
--prabhakar (pk)
On Fri, Mar 15, 2019 at 05:05:06AM +0000, Prabhakar Kushwaha wrote:
Hi Tom,
I am seeing following type of build warnings for MMC.
+===================== WARNING ====================== +This board does not use CONFIG_DM_MMC. Please update +the board to use CONFIG_DM_MMC before the v2019.04 release. +Failure to update by the deadline may result in board removal. +See doc/driver-model/MIGRATION.txt for more info.
Considering "number" of powerpc platform are not migrated to deice tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 time-frame (considering rc4 is on 18th march). v2019.07 looks feasible for removing all warning which includes CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI, CONFIG_DM_SPI_FLASH and CONFIG_DM_MMC.
is there any plan of removing boards which don't have CONFIG_DM_MMC for v2019.04?
Good question. Where exactly are we with getting more of PowerPC brought up to date with these requirements? I've mentioned before and will say it again, I'm inclined to start marking stuff as 'depends on BROKEN' for a release and then pulling the underlying code (so in this case, non-DM code from drivers/mmc/mmc.c and other MMC-core) for the release following.
-----Original Message----- From: Tom Rini trini@konsulko.com Sent: Friday, March 15, 2019 9:36 PM To: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: u-boot@lists.denx.de; York Sun york.sun@nxp.com Subject: Re: mpc85xx, mpc86xx: device tree model
On Fri, Mar 15, 2019 at 05:05:06AM +0000, Prabhakar Kushwaha wrote:
Hi Tom,
I am seeing following type of build warnings for MMC.
+===================== WARNING ====================== This board
does
+not use CONFIG_DM_MMC. Please update the board to use
CONFIG_DM_MMC
+before the v2019.04 release. +Failure to update by the deadline may result in board removal. +See doc/driver-model/MIGRATION.txt for more info.
Considering "number" of powerpc platform are not migrated to deice tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 time-frame (considering rc4 is on 18th march). v2019.07 looks feasible for removing all warning which includes CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI,
CONFIG_DM_SPI_FLASH and
CONFIG_DM_MMC.
is there any plan of removing boards which don't have CONFIG_DM_MMC for v2019.04?
Good question. Where exactly are we with getting more of PowerPC brought up to date with these requirements?
There are only 2 platforms which are on device tree model.
Rest (65 targets) still need to be ported. Here 13 are non-NXP and 52 NXP. I am working internally to get staffed for porting of NXP platform. For non-NXP , I will reaching platform owners for migration.
It will take some time.
I've mentioned before and will say it again, I'm inclined to start marking stuff as 'depends on BROKEN' for a release and then pulling the underlying code (so in this case, non-DM code from drivers/mmc/mmc.c and other MMC-core) for the release following.
Is enabling 'depends on BROKEN', still allow platform to build and use?
--pk
On Sun, Mar 17, 2019 at 03:01:32AM +0000, Prabhakar Kushwaha wrote:
-----Original Message----- From: Tom Rini trini@konsulko.com Sent: Friday, March 15, 2019 9:36 PM To: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: u-boot@lists.denx.de; York Sun york.sun@nxp.com Subject: Re: mpc85xx, mpc86xx: device tree model
On Fri, Mar 15, 2019 at 05:05:06AM +0000, Prabhakar Kushwaha wrote:
Hi Tom,
I am seeing following type of build warnings for MMC.
+===================== WARNING ====================== This board
does
+not use CONFIG_DM_MMC. Please update the board to use
CONFIG_DM_MMC
+before the v2019.04 release. +Failure to update by the deadline may result in board removal. +See doc/driver-model/MIGRATION.txt for more info.
Considering "number" of powerpc platform are not migrated to deice tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 time-frame (considering rc4 is on 18th march). v2019.07 looks feasible for removing all warning which includes CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI,
CONFIG_DM_SPI_FLASH and
CONFIG_DM_MMC.
is there any plan of removing boards which don't have CONFIG_DM_MMC for v2019.04?
Good question. Where exactly are we with getting more of PowerPC brought up to date with these requirements?
There are only 2 platforms which are on device tree model.
Rest (65 targets) still need to be ported. Here 13 are non-NXP and 52 NXP. I am working internally to get staffed for porting of NXP platform. For non-NXP , I will reaching platform owners for migration.
It will take some time.
OK.
I've mentioned before and will say it again, I'm inclined to start marking stuff as 'depends on BROKEN' for a release and then pulling the underlying code (so in this case, non-DM code from drivers/mmc/mmc.c and other MMC-core) for the release following.
Is enabling 'depends on BROKEN', still allow platform to build and use?
Yes, but it'll only buy a little bit of time. Thanks!
Hello Tom, rabhakar,
Am 17.03.2019 um 04:16 schrieb Tom Rini:
On Sun, Mar 17, 2019 at 03:01:32AM +0000, Prabhakar Kushwaha wrote:
-----Original Message----- From: Tom Rini trini@konsulko.com Sent: Friday, March 15, 2019 9:36 PM To: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Cc: u-boot@lists.denx.de; York Sun york.sun@nxp.com Subject: Re: mpc85xx, mpc86xx: device tree model
On Fri, Mar 15, 2019 at 05:05:06AM +0000, Prabhakar Kushwaha wrote:
Hi Tom,
I am seeing following type of build warnings for MMC.
+===================== WARNING ====================== This board
does
+not use CONFIG_DM_MMC. Please update the board to use
CONFIG_DM_MMC
+before the v2019.04 release. +Failure to update by the deadline may result in board removal. +See doc/driver-model/MIGRATION.txt for more info.
Considering "number" of powerpc platform are not migrated to deice tree. They can not be migrated to CONFIG_DM_MMC withing v2019.04 time-frame (considering rc4 is on 18th march). v2019.07 looks feasible for removing all warning which includes CONFIG_DM_USB, CONFIG_DM_SCSI, CONFIG_DM_PCI,
CONFIG_DM_SPI_FLASH and
CONFIG_DM_MMC.
is there any plan of removing boards which don't have CONFIG_DM_MMC for v2019.04?
Good question. Where exactly are we with getting more of PowerPC brought up to date with these requirements?
There are only 2 platforms which are on device tree model.
Rest (65 targets) still need to be ported. Here 13 are non-NXP and 52 NXP. I am working internally to get staffed for porting of NXP platform. For non-NXP , I will reaching platform owners for migration.
It will take some time.
OK.
I may get time to dig into mpc85xx based socrates board.
Anyone tried if this board works anymore?
@York: Do you work on such an adaption? May we can share efforts?
bye, Heikp
participants (4)
-
Heiko Schocher -
Prabhakar Kushwaha -
Tom Rini -
York Sun