[PATCH v3 0/7] x86: efi: Add a 64-bit coreboot payload

This series creates a new 64-bit 'coreboot64' build which can be launched from coreboot. It uses SPL to effect the jump to 64-bit mode.
This was done in an attempt to get the Ubuntu FirmwareTestSuite[1] working. Unfortunately the latest version shows a splash screen and hangs, perhaps due to some missing EFI support.
[1] https://wiki.ubuntu.com/FirmwareTestSuite
Changes in v3: - Add new patch to make coreboot detection work in 64-bit code - Show bit width for all archs, use sizeof(void *)
Changes in v2: - Add a new patch to indicate 32/64-bit in bdinfo
Simon Glass (7): x86: Move coreboot-table detection to common 32/64-bit code x86: Allow building an SPL image for coreboot x86: Move work-around out of cpu_jump_to_64bit_uboot() x86: Update SPL for coreboot x86: coreboot: Allow building an SPL image x86: Add an indication of 32/64-bit to bdinfo x86: Add a 64-bit coreboot build
Makefile | 6 ++++ arch/x86/cpu/Makefile | 4 ++- arch/x86/cpu/coreboot/Kconfig | 1 + arch/x86/cpu/coreboot/Makefile | 8 ++++- arch/x86/cpu/coreboot/coreboot.c | 3 +- arch/x86/cpu/coreboot/coreboot_spl.c | 12 +++++++ arch/x86/cpu/cpu.c | 25 +++++++++++++++ arch/x86/cpu/i386/cpu.c | 36 +-------------------- arch/x86/cpu/intel_common/Makefile | 2 ++ arch/x86/cpu/x86_64/cpu.c | 2 ++ arch/x86/dts/coreboot-u-boot.dtsi | 18 +++++++++++ arch/x86/lib/spl.c | 23 ++++++++++--- board/coreboot/coreboot/MAINTAINERS | 7 ++++ cmd/bdinfo.c | 20 ++++++++++++ configs/coreboot64_defconfig | 48 ++++++++++++++++++++++++++++ doc/board/coreboot/coreboot.rst | 10 ++++++ 16 files changed, 183 insertions(+), 42 deletions(-) create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi create mode 100644 configs/coreboot64_defconfig

At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: - Add new patch to make coreboot detection work in 64-bit code
Changes in v2: None
arch/x86/cpu/cpu.c | 25 +++++++++++++++++++++++++ arch/x86/cpu/i386/cpu.c | 26 +------------------------- 2 files changed, 26 insertions(+), 25 deletions(-)
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 8526e856d7..2e5d0ddd9f 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -290,3 +290,28 @@ int reserve_arch(void) return 0; } #endif + +long detect_coreboot_table_at(ulong start, ulong size) +{ + u32 *ptr, *end; + + size /= 4; + for (ptr = (void *)start, end = ptr + size; ptr < end; ptr += 4) { + if (*ptr == 0x4f49424c) /* "LBIO" */ + return (long)ptr; + } + + return -ENOENT; +} + +long locate_coreboot_table(void) +{ + long addr; + + /* We look for LBIO in the first 4K of RAM and again at 960KB */ + addr = detect_coreboot_table_at(0x0, 0x1000); + if (addr < 0) + addr = detect_coreboot_table_at(0xf0000, 0x1000); + + return addr; +} diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index 0312a26bbb..facd4f58a6 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -24,6 +24,7 @@ #include <malloc.h> #include <spl.h> #include <asm/control_regs.h> +#include <asm/coreboot_tables.h> #include <asm/cpu.h> #include <asm/mp.h> #include <asm/msr.h> @@ -447,31 +448,6 @@ int x86_cpu_init_f(void) return 0; }
-long detect_coreboot_table_at(ulong start, ulong size) -{ - u32 *ptr, *end; - - size /= 4; - for (ptr = (void *)start, end = ptr + size; ptr < end; ptr += 4) { - if (*ptr == 0x4f49424c) /* "LBIO" */ - return (long)ptr; - } - - return -ENOENT; -} - -long locate_coreboot_table(void) -{ - long addr; - - /* We look for LBIO in the first 4K of RAM and again at 960KB */ - addr = detect_coreboot_table_at(0x0, 0x1000); - if (addr < 0) - addr = detect_coreboot_table_at(0xf0000, 0x1000); - - return addr; -} - int x86_cpu_reinit_f(void) { setup_identity();

On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code
Changes in v2: None
arch/x86/cpu/cpu.c | 25 +++++++++++++++++++++++++ arch/x86/cpu/i386/cpu.c | 26 +------------------------- 2 files changed, 26 insertions(+), 25 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com

On Fri, May 1, 2020 at 6:25 PM Bin Meng bmeng.cn@gmail.com wrote:
On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present this function is only available in 32-bit code. Move it to the common cpu file so it can be used by 64-bit U-Boot too.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3:
- Add new patch to make coreboot detection work in 64-bit code
Changes in v2: None
arch/x86/cpu/cpu.c | 25 +++++++++++++++++++++++++ arch/x86/cpu/i386/cpu.c | 26 +------------------------- 2 files changed, 26 insertions(+), 25 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
applied to u-boot-x86, thanks!

Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
Makefile | 6 ++++++ arch/x86/cpu/coreboot/Kconfig | 1 + arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
diff --git a/Makefile b/Makefile index 6bb9cf55f2..cc99873062 100644 --- a/Makefile +++ b/Makefile @@ -926,6 +926,9 @@ ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom endif +ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy) +ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin +endif
# Build a combined spl + u-boot image for sunxi ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) @@ -1626,6 +1629,9 @@ u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE endif endif
+u-boot-x86-with-spl.bin: spl/u-boot-spl.bin u-boot.bin FORCE + $(call if_changed,binman) + ifneq ($(CONFIG_TEGRA),) ifneq ($(CONFIG_BINMAN),) # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin diff --git a/arch/x86/cpu/coreboot/Kconfig b/arch/x86/cpu/coreboot/Kconfig index c8e6a889d0..497d6284ac 100644 --- a/arch/x86/cpu/coreboot/Kconfig +++ b/arch/x86/cpu/coreboot/Kconfig @@ -25,5 +25,6 @@ config SYS_COREBOOT imply FS_CBFS imply CBMEM_CONSOLE imply X86_TSC_READ_BASE + select BINMAN if X86_64
endif diff --git a/arch/x86/dts/coreboot-u-boot.dtsi b/arch/x86/dts/coreboot-u-boot.dtsi new file mode 100644 index 0000000000..38efc48d83 --- /dev/null +++ b/arch/x86/dts/coreboot-u-boot.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Google LLC + * Written by Simon Glass sjg@chromium.org + */ + +#include <config.h> + +/ { + binman { + filename = "u-boot-x86-with-spl.bin"; + u-boot-spl { + }; + u-boot { + offset = <0x10000>; + }; + }; +};

On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
Makefile | 6 ++++++ arch/x86/cpu/coreboot/Kconfig | 1 + arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com

On Fri, May 1, 2020 at 6:25 PM Bin Meng bmeng.cn@gmail.com wrote:
On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
Coreboot runs in 32-bit mode and cannot run a 64-bit U-Boot. To get around this we can build a combined image with 32-bit SPL and 64-bit U-Boot. Add a build rule and binman definition for this.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
Makefile | 6 ++++++ arch/x86/cpu/coreboot/Kconfig | 1 + arch/x86/dts/coreboot-u-boot.dtsi | 18 ++++++++++++++++++ 3 files changed, 25 insertions(+) create mode 100644 arch/x86/dts/coreboot-u-boot.dtsi
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
applied to u-boot-x86, thanks!

At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.
But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
arch/x86/cpu/i386/cpu.c | 10 ---------- arch/x86/lib/spl.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index facd4f58a6..435e50edad 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -614,16 +614,6 @@ int cpu_jump_to_64bit_uboot(ulong target)
func = (func_t)ptr;
- /* - * Copy U-Boot from ROM - * TODO(sjg@chromium.org): Figure out a way to get the text base - * correctly here, and in the device-tree binman definition. - * - * Also consider using FIT so we get the correct image length and - * parameters. - */ - memcpy((char *)target, (char *)0xfff00000, 0x100000); - /* Jump to U-Boot */ func((ulong)pgtable, 0, (ulong)target);
diff --git a/arch/x86/lib/spl.c b/arch/x86/lib/spl.c index 90baec2a17..95a89c072d 100644 --- a/arch/x86/lib/spl.c +++ b/arch/x86/lib/spl.c @@ -207,6 +207,19 @@ static int spl_board_load_image(struct spl_image_info *spl_image, spl_image->os = IH_OS_U_BOOT; spl_image->name = "U-Boot";
+ if (!IS_ENABLED(CONFIG_SYS_COREBOOT)) { + /* + * Copy U-Boot from ROM + * TODO(sjg@chromium.org): Figure out a way to get the text base + * correctly here, and in the device-tree binman definition. + * + * Also consider using FIT so we get the correct image length + * and parameters. + */ + memcpy((char *)spl_image->load_addr, (char *)0xfff00000, + 0x100000); + } + debug("Loading to %lx\n", spl_image->load_addr);
return 0;

On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.
But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/cpu/i386/cpu.c | 10 ---------- arch/x86/lib/spl.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 10 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com

On Fri, May 1, 2020 at 6:25 PM Bin Meng bmeng.cn@gmail.com wrote:
On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present this function copies U-Boot from the last 1MB of ROM. This is not the right way to do it. Instead, the binman symbol should provide the location.
But in any case the code should live in the caller, spl_board_load_image(), so that the 64-bit jump function can be used elsewhere. Move it.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/cpu/i386/cpu.c | 10 ---------- arch/x86/lib/spl.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 10 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
applied to u-boot-x86, thanks!

At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
arch/x86/lib/spl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/x86/lib/spl.c b/arch/x86/lib/spl.c index 95a89c072d..212b4d596d 100644 --- a/arch/x86/lib/spl.c +++ b/arch/x86/lib/spl.c @@ -63,7 +63,7 @@ static int x86_spl_init(void) * is not needed. We could make this a CONFIG option or perhaps * place it immediately below CONFIG_SYS_TEXT_BASE. */ - char *ptr = (char *)0x110000; + __maybe_unused char *ptr = (char *)0x110000; #else struct udevice *punit; #endif @@ -111,7 +111,8 @@ static int x86_spl_init(void) __func__, ret); }
-#ifndef CONFIG_TPL +#ifndef CONFIG_SYS_COREBOOT +# ifndef CONFIG_TPL memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
/* TODO(sjg@chromium.org): Consider calling cpu_init_r() here */ @@ -140,7 +141,7 @@ static int x86_spl_init(void) return ret; } mtrr_commit(true); -#else +# else ret = syscon_get_by_driver_data(X86_SYSCON_PUNIT, &punit); if (ret) debug("Could not find PUNIT (err=%d)\n", ret); @@ -148,6 +149,7 @@ static int x86_spl_init(void) ret = set_max_freq(); if (ret) debug("Failed to set CPU frequency (err=%d)\n", ret); +# endif #endif
return 0; @@ -162,7 +164,7 @@ void board_init_f(ulong flags) debug("Error %d\n", ret); panic("x86_spl_init fail"); } -#ifdef CONFIG_TPL +#if IS_ENABLED(CONFIG_TPL) || IS_ENABLED(CONFIG_SYS_COREBOOT) gd->bd = malloc(sizeof(*gd->bd)); if (!gd->bd) { printf("Out of memory for bd_info size %x\n", sizeof(*gd->bd));

On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/lib/spl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com

On Fri, May 1, 2020 at 6:25 PM Bin Meng bmeng.cn@gmail.com wrote:
On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
At present SPL only works on bare-metal builds. With a few tweaks it can be used for coreboot also.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/lib/spl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
applied to u-boot-x86, thanks!

Make a few adjustments to allow us to build an SPL image for coreboot.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
arch/x86/cpu/Makefile | 4 +++- arch/x86/cpu/coreboot/Makefile | 8 +++++++- arch/x86/cpu/coreboot/coreboot.c | 3 ++- arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++ arch/x86/cpu/intel_common/Makefile | 2 ++ arch/x86/cpu/x86_64/cpu.c | 2 ++ 6 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 307267a8fb..ee0499f5d7 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -54,9 +54,11 @@ obj-$(CONFIG_INTEL_QUARK) += quark/ obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/ obj-$(CONFIG_INTEL_TANGIER) += tangier/ obj-$(CONFIG_APIC) += lapic.o ioapic.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o obj-$(CONFIG_$(SPL_TPL_)ACPI_GPE) += acpi_gpe.o obj-$(CONFIG_QFW) += qfw_cpu.o +ifndef CONFIG_SYS_COREBOOT +obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o +endif ifndef CONFIG_$(SPL_)X86_64 obj-$(CONFIG_SMP) += mp_init.o endif diff --git a/arch/x86/cpu/coreboot/Makefile b/arch/x86/cpu/coreboot/Makefile index 35b15bb1da..605f90304e 100644 --- a/arch/x86/cpu/coreboot/Makefile +++ b/arch/x86/cpu/coreboot/Makefile @@ -11,8 +11,14 @@ # (C) Copyright 2002 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ifndef CONFIG_SPL obj-y += car.o +endif +ifdef CONFIG_SPL_BUILD +obj-y += coreboot_spl.o +else +obj-y += sdram.o +endif obj-y += coreboot.o obj-y += tables.o -obj-y += sdram.o obj-y += timestamp.o diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index 0c4c6348d1..624caf67a6 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -27,7 +27,8 @@ int arch_cpu_init(void)
timestamp_init();
- return x86_cpu_init_f(); + return IS_ENABLED(CONFIG_X86_RUN_64BIT) ? x86_cpu_reinit_f() : + x86_cpu_init_f(); }
int checkcpu(void) diff --git a/arch/x86/cpu/coreboot/coreboot_spl.c b/arch/x86/cpu/coreboot/coreboot_spl.c new file mode 100644 index 0000000000..36661871e9 --- /dev/null +++ b/arch/x86/cpu/coreboot/coreboot_spl.c @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Google LLC + */ + +#include <common.h> +#include <init.h> + +int dram_init(void) +{ + return 0; +} diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index 1736bd2b53..374803b876 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -32,6 +32,8 @@ obj-$(CONFIG_HAVE_P2SB) += p2sb.o
ifdef CONFIG_SPL ifndef CONFIG_SPL_BUILD +ifndef CONFIG_SYS_COREBOOT obj-y += cpu_from_spl.o endif endif +endif diff --git a/arch/x86/cpu/x86_64/cpu.c b/arch/x86/cpu/x86_64/cpu.c index 90925e46ea..4b64339f25 100644 --- a/arch/x86/cpu/x86_64/cpu.c +++ b/arch/x86/cpu/x86_64/cpu.c @@ -53,6 +53,7 @@ int misc_init_r(void) return 0; }
+#ifndef CONFIG_SYS_COREBOOT int checkcpu(void) { return 0; @@ -62,6 +63,7 @@ int print_cpuinfo(void) { return 0; } +#endif
int x86_cpu_reinit_f(void) {

On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
Make a few adjustments to allow us to build an SPL image for coreboot.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/cpu/Makefile | 4 +++- arch/x86/cpu/coreboot/Makefile | 8 +++++++- arch/x86/cpu/coreboot/coreboot.c | 3 ++- arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++ arch/x86/cpu/intel_common/Makefile | 2 ++ arch/x86/cpu/x86_64/cpu.c | 2 ++ 6 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com

On Fri, May 1, 2020 at 6:25 PM Bin Meng bmeng.cn@gmail.com wrote:
On Fri, May 1, 2020 at 11:22 AM Simon Glass sjg@chromium.org wrote:
Make a few adjustments to allow us to build an SPL image for coreboot.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
arch/x86/cpu/Makefile | 4 +++- arch/x86/cpu/coreboot/Makefile | 8 +++++++- arch/x86/cpu/coreboot/coreboot.c | 3 ++- arch/x86/cpu/coreboot/coreboot_spl.c | 12 ++++++++++++ arch/x86/cpu/intel_common/Makefile | 2 ++ arch/x86/cpu/x86_64/cpu.c | 2 ++ 6 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 arch/x86/cpu/coreboot/coreboot_spl.c
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
applied to u-boot-x86, thanks!

It is useful to know what mode U-Boot is running in. Add a message at the end of the 'bdinfo' output.
Signed-off-by: Simon Glass sjg@chromium.org Suggested-by: Mark Kettenis kettenis@openbsd.org ---
Changes in v3: - Show bit width for all archs, use sizeof(void *)
Changes in v2: - Add a new patch to indicate 32/64-bit in bdinfo
cmd/bdinfo.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index d6a7175b37..34de89eb6d 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -15,6 +15,11 @@
DECLARE_GLOBAL_DATA_PTR;
+__maybe_unused void print_cpu_word_size(void) +{ + printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8); +} + __maybe_unused static void print_num(const char *name, ulong value) { @@ -208,6 +213,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_baudrate(); print_num("relocaddr", gd->relocaddr); board_detail(); + print_cpu_word_size(); + return 0; }
@@ -227,6 +234,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size();
return 0; } @@ -252,6 +260,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("fdt_blob", (ulong)gd->fdt_blob); print_num("new_fdt", (ulong)gd->new_fdt); print_num("fdt_size", (ulong)gd->fdt_size); + print_cpu_word_size();
return 0; } @@ -283,6 +292,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size();
return 0; } @@ -294,6 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_std_bdinfo(gd->bd); print_num("relocaddr", gd->relocaddr); print_num("reloc off", gd->reloc_off); + print_cpu_word_size();
return 0; } @@ -354,6 +365,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, #endif if (gd->fdt_blob) print_num("fdt_blob", (ulong)gd->fdt_blob); + print_cpu_word_size();
return 0; } @@ -368,6 +380,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_flash(bd); print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size(); + return 0; }
@@ -388,6 +402,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("ethspeed", bd->bi_ethspeed); #endif print_baudrate(); + print_cpu_word_size();
return 0; } @@ -405,6 +420,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) print_num("FB base ", gd->fb_base); #endif + print_cpu_word_size(); + return 0; }
@@ -419,6 +436,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_dram(bd); print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size();
return 0; } @@ -435,6 +453,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("reloc off", gd->reloc_off); print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size();
return 0; } @@ -448,6 +467,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_mem(bd); print_eth_ip_addr(); print_baudrate(); + print_cpu_word_size();
return 0; }

Am May 1, 2020 3:21:44 AM UTC schrieb Simon Glass sjg@chromium.org:
It is useful to know what mode U-Boot is running in. Add a message at the end of the 'bdinfo' output.
Signed-off-by: Simon Glass sjg@chromium.org Suggested-by: Mark Kettenis kettenis@openbsd.org
Changes in v3:
- Show bit width for all archs, use sizeof(void *)
Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo
cmd/bdinfo.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index d6a7175b37..34de89eb6d 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -15,6 +15,11 @@
DECLARE_GLOBAL_DATA_PTR;
+__maybe_unused void print_cpu_word_size(void) +{
- printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8);
%d and uint do not match. Please, use %u for unsigned int.
Best regards
Heinrich
+}
__maybe_unused static void print_num(const char *name, ulong value) { @@ -208,6 +213,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_baudrate(); print_num("relocaddr", gd->relocaddr); board_detail();
- print_cpu_word_size();
- return 0;
}
@@ -227,6 +234,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_eth_ip_addr(); print_baudrate();
print_cpu_word_size();
return 0;
} @@ -252,6 +260,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("fdt_blob", (ulong)gd->fdt_blob); print_num("new_fdt", (ulong)gd->new_fdt); print_num("fdt_size", (ulong)gd->fdt_size);
print_cpu_word_size();
return 0;
} @@ -283,6 +292,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif print_eth_ip_addr(); print_baudrate();
print_cpu_word_size();
return 0;
} @@ -294,6 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_std_bdinfo(gd->bd); print_num("relocaddr", gd->relocaddr); print_num("reloc off", gd->reloc_off);
print_cpu_word_size();
return 0;
} @@ -354,6 +365,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, #endif if (gd->fdt_blob) print_num("fdt_blob", (ulong)gd->fdt_blob);
print_cpu_word_size();
return 0;
} @@ -368,6 +380,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_flash(bd); print_eth_ip_addr(); print_baudrate();
- print_cpu_word_size();
- return 0;
}
@@ -388,6 +402,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("ethspeed", bd->bi_ethspeed); #endif print_baudrate();
print_cpu_word_size();
return 0;
} @@ -405,6 +420,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) print_num("FB base ", gd->fb_base); #endif
- print_cpu_word_size();
- return 0;
}
@@ -419,6 +436,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_dram(bd); print_eth_ip_addr(); print_baudrate();
print_cpu_word_size();
return 0;
} @@ -435,6 +453,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("reloc off", gd->reloc_off); print_eth_ip_addr(); print_baudrate();
print_cpu_word_size();
return 0;
} @@ -448,6 +467,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_bi_mem(bd); print_eth_ip_addr(); print_baudrate();
print_cpu_word_size();
return 0;
}

Hi Heinrich,
On Thu, 30 Apr 2020 at 21:39, Heinrich Schuchardt xypron.glpk@gmx.de wrote:
Am May 1, 2020 3:21:44 AM UTC schrieb Simon Glass sjg@chromium.org:
It is useful to know what mode U-Boot is running in. Add a message at the end of the 'bdinfo' output.
Signed-off-by: Simon Glass sjg@chromium.org Suggested-by: Mark Kettenis kettenis@openbsd.org
Changes in v3:
- Show bit width for all archs, use sizeof(void *)
Changes in v2:
- Add a new patch to indicate 32/64-bit in bdinfo
cmd/bdinfo.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index d6a7175b37..34de89eb6d 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -15,6 +15,11 @@
DECLARE_GLOBAL_DATA_PTR;
+__maybe_unused void print_cpu_word_size(void) +{
printf("%-12s= %d-bit\n", "Build", (uint)sizeof(void *) * 8);
%d and uint do not match. Please, use %u for unsigned int.
Yes I was thinking that but somehow managed to change one without the other.
Regards, SImon

Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.
Coreboot boots into SPL and then SPL boots into U-Boot.
This allows running 64-bit EFI images on x86. Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: None
board/coreboot/coreboot/MAINTAINERS | 7 +++++ configs/coreboot64_defconfig | 48 +++++++++++++++++++++++++++++ doc/board/coreboot/coreboot.rst | 10 ++++++ 3 files changed, 65 insertions(+) create mode 100644 configs/coreboot64_defconfig
diff --git a/board/coreboot/coreboot/MAINTAINERS b/board/coreboot/coreboot/MAINTAINERS index 188906b080..a05673bb0b 100644 --- a/board/coreboot/coreboot/MAINTAINERS +++ b/board/coreboot/coreboot/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/coreboot/coreboot/ F: include/configs/chromebook_link.h F: configs/coreboot_defconfig + +COREBOOT64 BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/coreboot/coreboot/ +F: include/configs/chromebook_link.h +F: configs/coreboot64_defconfig diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig new file mode 100644 index 0000000000..80353b8eb3 --- /dev/null +++ b/configs/coreboot64_defconfig @@ -0,0 +1,48 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1120000 +CONFIG_ENV_SIZE=0x1000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_X86_RUN_64BIT=y +CONFIG_VENDOR_COREBOOT=y +CONFIG_TARGET_COREBOOT=y +CONFIG_SPL_TEXT_BASE=0x1110000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IDE=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +# CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_SOUND=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MAC_PARTITION=y +# CONFIG_SPL_MAC_PARTITION is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="coreboot" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +# CONFIG_PCI_PNP is not set +CONFIG_SOUND=y +CONFIG_SOUND_I8254=y +CONFIG_CONSOLE_SCROLL_LINES=5 diff --git a/doc/board/coreboot/coreboot.rst b/doc/board/coreboot/coreboot.rst index fd974229eb..9c44c025a4 100644 --- a/doc/board/coreboot/coreboot.rst +++ b/doc/board/coreboot/coreboot.rst @@ -40,3 +40,13 @@ To enable video you must enable these options in coreboot: At present it seems that for Minnowboard Max, coreboot does not pass through the video information correctly (it always says the resolution is 0x0). This works correctly for link though. + +64-bit U-Boot +------------- + +In addition to the 32-bit 'coreboot' build there is a 'coreboot64' build. This +produces an image which can be booted from coreboot (32-bit). Internally it +works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It +can be useful for running UEFI applications, for example. + +This has only been lightly tested.

Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass sjg@chromium.org:
Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.
Coreboot boots into SPL and then SPL boots into U-Boot.
This allows running 64-bit EFI images on x86. Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
board/coreboot/coreboot/MAINTAINERS | 7 +++++ configs/coreboot64_defconfig | 48 +++++++++++++++++++++++++++++ doc/board/coreboot/coreboot.rst | 10 ++++++ 3 files changed, 65 insertions(+) create mode 100644 configs/coreboot64_defconfig
diff --git a/board/coreboot/coreboot/MAINTAINERS b/board/coreboot/coreboot/MAINTAINERS index 188906b080..a05673bb0b 100644 --- a/board/coreboot/coreboot/MAINTAINERS +++ b/board/coreboot/coreboot/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/coreboot/coreboot/ F: include/configs/chromebook_link.h F: configs/coreboot_defconfig
+COREBOOT64 BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/coreboot/coreboot/ +F: include/configs/chromebook_link.h +F: configs/coreboot64_defconfig diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig new file mode 100644 index 0000000000..80353b8eb3 --- /dev/null +++ b/configs/coreboot64_defconfig @@ -0,0 +1,48 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1120000 +CONFIG_ENV_SIZE=0x1000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_X86_RUN_64BIT=y +CONFIG_VENDOR_COREBOOT=y +CONFIG_TARGET_COREBOOT=y +CONFIG_SPL_TEXT_BASE=0x1110000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
Isn't this defconfig for a generic coreboot device? So why would you prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?
Best regards
Heinrich
+CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IDE=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +# CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_CMD_SOUND=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MAC_PARTITION=y +# CONFIG_SPL_MAC_PARTITION is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="coreboot" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +# CONFIG_PCI_PNP is not set +CONFIG_SOUND=y +CONFIG_SOUND_I8254=y +CONFIG_CONSOLE_SCROLL_LINES=5 diff --git a/doc/board/coreboot/coreboot.rst b/doc/board/coreboot/coreboot.rst index fd974229eb..9c44c025a4 100644 --- a/doc/board/coreboot/coreboot.rst +++ b/doc/board/coreboot/coreboot.rst @@ -40,3 +40,13 @@ To enable video you must enable these options in coreboot: At present it seems that for Minnowboard Max, coreboot does not pass through the video information correctly (it always says the resolution is 0x0). This works correctly for link though.
+64-bit U-Boot +-------------
+In addition to the 32-bit 'coreboot' build there is a 'coreboot64' build. This +produces an image which can be booted from coreboot (32-bit). Internally it +works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It +can be useful for running UEFI applications, for example.
+This has only been lightly tested.

HI Heinrich,
On Thu, 30 Apr 2020 at 21:57, Heinrich Schuchardt xypron.glpk@gmx.de wrote:
Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass sjg@chromium.org:
Add a build for running 64-bit U-Boot from coreboot (which is 32-bit). This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.
Coreboot boots into SPL and then SPL boots into U-Boot.
This allows running 64-bit EFI images on x86. Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
board/coreboot/coreboot/MAINTAINERS | 7 +++++ configs/coreboot64_defconfig | 48 +++++++++++++++++++++++++++++ doc/board/coreboot/coreboot.rst | 10 ++++++ 3 files changed, 65 insertions(+) create mode 100644 configs/coreboot64_defconfig
diff --git a/board/coreboot/coreboot/MAINTAINERS b/board/coreboot/coreboot/MAINTAINERS index 188906b080..a05673bb0b 100644 --- a/board/coreboot/coreboot/MAINTAINERS +++ b/board/coreboot/coreboot/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/coreboot/coreboot/ F: include/configs/chromebook_link.h F: configs/coreboot_defconfig
+COREBOOT64 BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/coreboot/coreboot/ +F: include/configs/chromebook_link.h +F: configs/coreboot64_defconfig diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig new file mode 100644 index 0000000000..80353b8eb3 --- /dev/null +++ b/configs/coreboot64_defconfig @@ -0,0 +1,48 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1120000 +CONFIG_ENV_SIZE=0x1000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_X86_RUN_64BIT=y +CONFIG_VENDOR_COREBOOT=y +CONFIG_TARGET_COREBOOT=y +CONFIG_SPL_TEXT_BASE=0x1110000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
Isn't this defconfig for a generic coreboot device? So why would you prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?
What do you suggest?
This matches the coreboot board and is the default boot device on one board that uses this.
Perhaps we should be finding out the bootdevice from coreboot? But in any case, people can add their own script.
Regards, Simon

Am May 1, 2020 4:04:06 AM UTC schrieb Simon Glass sjg@chromium.org:
HI Heinrich,
On Thu, 30 Apr 2020 at 21:57, Heinrich Schuchardt xypron.glpk@gmx.de wrote:
Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass sjg@chromium.org:
Add a build for running 64-bit U-Boot from coreboot (which is
32-bit).
This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.
Coreboot boots into SPL and then SPL boots into U-Boot.
This allows running 64-bit EFI images on x86. Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
board/coreboot/coreboot/MAINTAINERS | 7 +++++ configs/coreboot64_defconfig | 48
+++++++++++++++++++++++++++++
doc/board/coreboot/coreboot.rst | 10 ++++++ 3 files changed, 65 insertions(+) create mode 100644 configs/coreboot64_defconfig
diff --git a/board/coreboot/coreboot/MAINTAINERS b/board/coreboot/coreboot/MAINTAINERS index 188906b080..a05673bb0b 100644 --- a/board/coreboot/coreboot/MAINTAINERS +++ b/board/coreboot/coreboot/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/coreboot/coreboot/ F: include/configs/chromebook_link.h F: configs/coreboot_defconfig
+COREBOOT64 BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/coreboot/coreboot/ +F: include/configs/chromebook_link.h +F: configs/coreboot64_defconfig diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig new file mode 100644 index 0000000000..80353b8eb3 --- /dev/null +++ b/configs/coreboot64_defconfig @@ -0,0 +1,48 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1120000 +CONFIG_ENV_SIZE=0x1000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_X86_RUN_64BIT=y +CONFIG_VENDOR_COREBOOT=y +CONFIG_TARGET_COREBOOT=y +CONFIG_SPL_TEXT_BASE=0x1110000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
Isn't this defconfig for a generic coreboot device? So why would you
prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?
What do you suggest?
This matches the coreboot board and is the default boot device on one board that uses this.
I thought this patch series is about boards booted via the fimware "Coreboot" and not a specific board by chance also called "Coreboot". Please, clarify this in the commit message.
And if this defconfig is for a specific board called "Coreboot" couldn't you add some indication of the vendor name to the defconfig filename to avoid further misunderstandings.
Best regards
Heinrich
Perhaps we should be finding out the bootdevice from coreboot? But in any case, people can add their own script.
Regards, Simon

Hi Simon,
On Fri, May 1, 2020 at 12:21 PM Heinrich Schuchardt xypron.glpk@gmx.de wrote:
Am May 1, 2020 4:04:06 AM UTC schrieb Simon Glass sjg@chromium.org:
HI Heinrich,
On Thu, 30 Apr 2020 at 21:57, Heinrich Schuchardt xypron.glpk@gmx.de wrote:
Am May 1, 2020 3:21:45 AM UTC schrieb Simon Glass sjg@chromium.org:
Add a build for running 64-bit U-Boot from coreboot (which is
32-bit).
This uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.
Coreboot boots into SPL and then SPL boots into U-Boot.
This allows running 64-bit EFI images on x86. Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2: None
board/coreboot/coreboot/MAINTAINERS | 7 +++++ configs/coreboot64_defconfig | 48
+++++++++++++++++++++++++++++
doc/board/coreboot/coreboot.rst | 10 ++++++ 3 files changed, 65 insertions(+) create mode 100644 configs/coreboot64_defconfig
diff --git a/board/coreboot/coreboot/MAINTAINERS b/board/coreboot/coreboot/MAINTAINERS index 188906b080..a05673bb0b 100644 --- a/board/coreboot/coreboot/MAINTAINERS +++ b/board/coreboot/coreboot/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/coreboot/coreboot/ F: include/configs/chromebook_link.h F: configs/coreboot_defconfig
+COREBOOT64 BOARD +M: Simon Glass sjg@chromium.org +S: Maintained +F: board/coreboot/coreboot/ +F: include/configs/chromebook_link.h +F: configs/coreboot64_defconfig diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig new file mode 100644 index 0000000000..80353b8eb3 --- /dev/null +++ b/configs/coreboot64_defconfig @@ -0,0 +1,48 @@ +CONFIG_X86=y +CONFIG_SYS_TEXT_BASE=0x1120000 +CONFIG_ENV_SIZE=0x1000 +CONFIG_NR_DRAM_BANKS=8 +CONFIG_PRE_CON_BUF_ADDR=0x100000 +CONFIG_X86_RUN_64BIT=y +CONFIG_VENDOR_COREBOOT=y +CONFIG_TARGET_COREBOOT=y +CONFIG_SPL_TEXT_BASE=0x1110000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
Isn't this defconfig for a generic coreboot device? So why would you
prescribe a boot partition which may not exist? And what should a non-Linux OS do with 'init='?
What do you suggest?
This matches the coreboot board and is the default boot device on one board that uses this.
I thought this patch series is about boards booted via the fimware "Coreboot" and not a specific board by chance also called "Coreboot". Please, clarify this in the commit message.
And if this defconfig is for a specific board called "Coreboot" couldn't you add some indication of the vendor name to the defconfig filename to avoid further misunderstandings.
Best regards
I left this patch unapplied since Heinrich has some comments. Please rebase the next version on top of u-boot-x86/master.
Regards, Bin
participants (3)
-
Bin Meng
-
Heinrich Schuchardt
-
Simon Glass