The CONFIG_SYS_MMC_ENV_DEV is duplicated, drop it.

Signed-off-by: Otavio Salvador otavio@ossystems.com.br ---

include/configs/mx25pdk.h | 2 -- 1 file changed, 2 deletions(-)

diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 57e2a6db36..bb100c40df 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -58,8 +58,6 @@ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0

-#define CONFIG_SYS_MMC_ENV_DEV 0 - /* U-Boot general configuration */ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */

On 30/09/2017 03:54, Otavio Salvador wrote:

This rework the board to use the generic filesystem commands instead of forcing the use of FAT for the boot files.

Signed-off-by: Otavio Salvador otavio@ossystems.com.br

configs/mx25pdk_defconfig | 5 +++-- include/configs/mx25pdk.h | 9 ++++++--- 2 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig index e75a82c199..8ed394569a 100644 --- a/configs/mx25pdk_defconfig +++ b/configs/mx25pdk_defconfig @@ -15,7 +15,8 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_DOS_PARTITION=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_FS_FAT=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index bc41a3362d..57e2a6db36 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -70,6 +70,9 @@

/* U-Boot commands */

+/* Filesystem support */ +#define CONFIG_FS_EXT4

/* Ethernet */ #define CONFIG_FEC_MXC #define CONFIG_FEC_MXC_PHYADDR 0x1f @@ -138,11 +141,11 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \

• "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  

• "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  

  "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \

• "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
• "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \

• "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
• "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \

Applied to u-boot-imx, -master, thanks !

Best regards, Stefano Babic