From: Jerome Brunet jbrunet@baylibre.com

MESON_FDTFILE_SETTING is used to define the default name of the fdt file in u-boot environment. We can easily derive it from CONFIG_DEFAULT_DEVICE_TREE instead. This will help factorize the code a bit

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- include/configs/khadas-vim.h | 2 -- include/configs/libretech-cc.h | 2 -- include/configs/meson-gx-common.h | 2 +- include/configs/nanopi-k2.h | 4 ---- include/configs/odroid-c2.h | 4 ---- include/configs/p212.h | 4 ---- 6 files changed, 1 insertion(+), 17 deletions(-)

diff --git a/include/configs/khadas-vim.h b/include/configs/khadas-vim.h index 6615f77..ff87c02 100644 --- a/include/configs/khadas-vim.h +++ b/include/configs/khadas-vim.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0" - #include <configs/meson-gx-common.h>

#endif /* __CONFIG_H */ diff --git a/include/configs/libretech-cc.h b/include/configs/libretech-cc.h index a0856f9..95e0f34 100644 --- a/include/configs/libretech-cc.h +++ b/include/configs/libretech-cc.h @@ -9,8 +9,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0" - #include <configs/meson-gx-common.h>

#endif /* __CONFIG_H */ diff --git a/include/configs/meson-gx-common.h b/include/configs/meson-gx-common.h index c46522e..c436976 100644 --- a/include/configs/meson-gx-common.h +++ b/include/configs/meson-gx-common.h @@ -44,7 +44,7 @@ "kernel_addr_r=0x01080000\0" \ "pxefile_addr_r=0x01080000\0" \ "ramdisk_addr_r=0x13000000\0" \ - MESON_FDTFILE_SETTING \ + "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ BOOTENV

#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ diff --git a/include/configs/nanopi-k2.h b/include/configs/nanopi-k2.h index ef53f20..3fd6e8f 100644 --- a/include/configs/nanopi-k2.h +++ b/include/configs/nanopi-k2.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-/* Serial setup */ - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-nanopi-k2.dtb\0" - #include <configs/meson-gx-common.h>

#endif /* __CONFIG_H */ diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h index d117b18..87e3ddb 100644 --- a/include/configs/odroid-c2.h +++ b/include/configs/odroid-c2.h @@ -7,10 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-/* Serial setup */ - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0" - #include <configs/meson-gx-common.h>

#endif /* __CONFIG_H */ diff --git a/include/configs/p212.h b/include/configs/p212.h index 2aa9f5d..4414293 100644 --- a/include/configs/p212.h +++ b/include/configs/p212.h @@ -9,10 +9,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-/* Serial setup */ - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-p212.dtb\0" - #include <configs/meson-gx-common.h>

#endif /* __CONFIG_H */

The Khadas vim2 derive from amlogic s912 reference design (Q200).

This patch moves the khadas-vim2 board support to a generic Q200 board, while keeping a dedicated defconfig to customize the names and device tree.

Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/mach-meson/Kconfig | 9 +-- board/amlogic/khadas-vim2/Kconfig | 12 ---- board/amlogic/khadas-vim2/MAINTAINERS | 6 -- board/amlogic/khadas-vim2/Makefile | 6 -- board/amlogic/khadas-vim2/README | 103 -------------------------------- board/amlogic/khadas-vim2/khadas-vim2.c | 62 ------------------- board/amlogic/q200/Kconfig | 12 ++++ board/amlogic/q200/MAINTAINERS | 6 ++ board/amlogic/q200/Makefile | 6 ++ board/amlogic/q200/README.khadas-vim2 | 103 ++++++++++++++++++++++++++++++++ board/amlogic/q200/README.q200 | 102 +++++++++++++++++++++++++++++++ board/amlogic/q200/q200.c | 62 +++++++++++++++++++ configs/khadas-vim2_defconfig | 2 +- include/configs/khadas-vim2.h | 18 ------ include/configs/q200.h | 18 ++++++ 15 files changed, 315 insertions(+), 212 deletions(-) delete mode 100644 board/amlogic/khadas-vim2/Kconfig delete mode 100644 board/amlogic/khadas-vim2/MAINTAINERS delete mode 100644 board/amlogic/khadas-vim2/Makefile delete mode 100644 board/amlogic/khadas-vim2/README delete mode 100644 board/amlogic/khadas-vim2/khadas-vim2.c create mode 100644 board/amlogic/q200/Kconfig create mode 100644 board/amlogic/q200/MAINTAINERS create mode 100644 board/amlogic/q200/Makefile create mode 100644 board/amlogic/q200/README.khadas-vim2 create mode 100644 board/amlogic/q200/README.q200 create mode 100644 board/amlogic/q200/q200.c delete mode 100644 include/configs/khadas-vim2.h create mode 100644 include/configs/q200.h

diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index e0b2812..98303db 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -50,13 +50,14 @@ config TARGET_P212 You should also select this TARGET if you have Khadas Vim or a libretech aml-s905x-cc

-config TARGET_KHADAS_VIM2 +config TARGET_Q200 bool "KHADAS-VIM2" select MESON_GXM help - Khadas VIM2 is a single board computer based on Meson GXM + Q200 is a reference dessign board based on Meson GXM with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot, - eMMC, IR receiver and a 40-pin GPIO header. + eMMC, IR receiver. + You should also select this TARGET if you have Khadas Vim2.

endchoice

@@ -72,6 +73,6 @@ source "board/amlogic/nanopi-k2/Kconfig"

source "board/amlogic/p212/Kconfig"

-source "board/amlogic/khadas-vim2/Kconfig" +source "board/amlogic/q200/Kconfig"

endif diff --git a/board/amlogic/khadas-vim2/Kconfig b/board/amlogic/khadas-vim2/Kconfig deleted file mode 100644 index d0af362..0000000 --- a/board/amlogic/khadas-vim2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KHADAS_VIM2 - -config SYS_BOARD - default "khadas-vim2" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "khadas-vim2" - -endif diff --git a/board/amlogic/khadas-vim2/MAINTAINERS b/board/amlogic/khadas-vim2/MAINTAINERS deleted file mode 100644 index ca63e31..0000000 --- a/board/amlogic/khadas-vim2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -KHADAS-VIM2 -M: Neil Armstrong narmstrong@baylibre.com -S: Maintained -F: board/amlogic/khadas-vim2/ -F: include/configs/khadas-vim2.h -F: configs/khadas-vim2_defconfig diff --git a/board/amlogic/khadas-vim2/Makefile b/board/amlogic/khadas-vim2/Makefile deleted file mode 100644 index 4e7c9a0..0000000 --- a/board/amlogic/khadas-vim2/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2016 BayLibre, SAS -# Author: Neil Armstrong narmstrong@baylibre.com - -obj-y := khadas-vim2.o diff --git a/board/amlogic/khadas-vim2/README b/board/amlogic/khadas-vim2/README deleted file mode 100644 index 578693f..0000000 --- a/board/amlogic/khadas-vim2/README +++ /dev/null @@ -1,103 +0,0 @@ -U-Boot for Khadas VIM2 -======================= - -Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion -Technology Co., Ltd with the following specifications: - - - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz - - ARM Mali T860 GPU - - 2/3GB DDR4 SDRAM - - 10/100/1000 Ethernet - - HDMI 2.0 4K/60Hz display - - 40-pin GPIO header - - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG - - 16GB/32GB/64GB eMMC - - 2MB SPI Flash - - microSD - - SDIO Wifi Module, Bluetooth - - Two channels IR receiver - -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - -U-Boot compilation -================== - - > export ARCH=arm - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make - -Image creation -============== - -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: - - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot - > cd vim-u-boot - > make kvim_defconfig - > make - > export FIPDIR=$PWD/fip - -Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc - -and then write the image to SD with: - - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/khadas-vim2/khadas-vim2.c b/board/amlogic/khadas-vim2/khadas-vim2.c deleted file mode 100644 index ff56569..0000000 --- a/board/amlogic/khadas-vim2/khadas-vim2.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016 BayLibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#include <common.h> -#include <dm.h> -#include <environment.h> -#include <asm/io.h> -#include <asm/arch/gx.h> -#include <asm/arch/mem.h> -#include <asm/arch/sm.h> -#include <asm/arch/eth.h> - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - char serial[EFUSE_SN_SIZE]; - ssize_t len; - - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - - /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - if (!env_get("serial#")) { - len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, - EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) - env_set("serial#", serial); - } - - return 0; -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - meson_gx_init_reserved_memory(blob); - - return 0; -} diff --git a/board/amlogic/q200/Kconfig b/board/amlogic/q200/Kconfig new file mode 100644 index 0000000..cfaf379 --- /dev/null +++ b/board/amlogic/q200/Kconfig @@ -0,0 +1,12 @@ +if TARGET_Q200 + +config SYS_BOARD + default "q200" + +config SYS_VENDOR + default "amlogic" + +config SYS_CONFIG_NAME + default "q200" + +endif diff --git a/board/amlogic/q200/MAINTAINERS b/board/amlogic/q200/MAINTAINERS new file mode 100644 index 0000000..be86386 --- /dev/null +++ b/board/amlogic/q200/MAINTAINERS @@ -0,0 +1,6 @@ +Q200 +M: Neil Armstrong narmstrong@baylibre.com +S: Maintained +F: board/amlogic/q200/ +F: include/configs/q200.h +F: configs/khadas-vim2_defconfig diff --git a/board/amlogic/q200/Makefile b/board/amlogic/q200/Makefile new file mode 100644 index 0000000..fd78fd0 --- /dev/null +++ b/board/amlogic/q200/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 BayLibre, SAS +# Author: Neil Armstrong narmstrong@baylibre.com + +obj-y := q200.o diff --git a/board/amlogic/q200/README.khadas-vim2 b/board/amlogic/q200/README.khadas-vim2 new file mode 100644 index 0000000..578693f --- /dev/null +++ b/board/amlogic/q200/README.khadas-vim2 @@ -0,0 +1,103 @@ +U-Boot for Khadas VIM2 +======================= + +Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion +Technology Co., Ltd with the following specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 40-pin GPIO header + - 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - Two channels IR receiver + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make khadas-vim2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot + > cd vim-u-boot + > make kvim_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxl/bl2.bin fip/ + > cp $FIPDIR/gxl/acs.bin fip/ + > cp $FIPDIR/gxl/bl21.bin fip/ + > cp $FIPDIR/gxl/bl30.bin fip/ + > cp $FIPDIR/gxl/bl301.bin fip/ + > cp $FIPDIR/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.q200 b/board/amlogic/q200/README.q200 new file mode 100644 index 0000000..55d730a --- /dev/null +++ b/board/amlogic/q200/README.q200 @@ -0,0 +1,102 @@ +U-Boot for Amlogic Q200 +======================= + +Q200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host, 1 x USB 2.0 Device + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - IR receiver + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make khadas-vim2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + > cd amlogic-u-boot + > make gxm_q200_v1_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxl/bl2.bin fip/ + > cp $FIPDIR/gxl/acs.bin fip/ + > cp $FIPDIR/gxl/bl21.bin fip/ + > cp $FIPDIR/gxl/bl30.bin fip/ + > cp $FIPDIR/gxl/bl301.bin fip/ + > cp $FIPDIR/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c new file mode 100644 index 0000000..ff56569 --- /dev/null +++ b/board/amlogic/q200/q200.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include <common.h> +#include <dm.h> +#include <environment.h> +#include <asm/io.h> +#include <asm/arch/gx.h> +#include <asm/arch/mem.h> +#include <asm/arch/sm.h> +#include <asm/arch/eth.h> + +#define EFUSE_SN_OFFSET 20 +#define EFUSE_SN_SIZE 16 +#define EFUSE_MAC_OFFSET 52 +#define EFUSE_MAC_SIZE 6 + +int board_init(void) +{ + return 0; +} + +int misc_init_r(void) +{ + u8 mac_addr[EFUSE_MAC_SIZE]; + char serial[EFUSE_SN_SIZE]; + ssize_t len; + + meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + + /* Reset PHY on GPIOZ_14 */ + clrbits_le32(GX_GPIO_EN(3), BIT(14)); + clrbits_le32(GX_GPIO_OUT(3), BIT(14)); + mdelay(10); + setbits_le32(GX_GPIO_OUT(3), BIT(14)); + + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + } + + if (!env_get("serial#")) { + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, + EFUSE_SN_SIZE); + if (len == EFUSE_SN_SIZE) + env_set("serial#", serial); + } + + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + meson_gx_init_reserved_memory(blob); + + return 0; +} diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index f21e3a8..387d7da 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXM=y -CONFIG_TARGET_KHADAS_VIM2=y +CONFIG_TARGET_Q200=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" diff --git a/include/configs/khadas-vim2.h b/include/configs/khadas-vim2.h deleted file mode 100644 index 7ef8f42..0000000 --- a/include/configs/khadas-vim2.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Khadas VIM2 - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MISC_INIT_R - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/q200.h b/include/configs/q200.h new file mode 100644 index 0000000..7ef8f42 --- /dev/null +++ b/include/configs/q200.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for Khadas VIM2 + * + * Copyright (C) 2017 Baylibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MISC_INIT_R + +#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" + +#include <configs/meson-gx-common.h> + +#endif /* __CONFIG_H */

From: Jerome Brunet jbrunet@baylibre.com

Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving the board Kconfig into the mach-meson Kconfig to make it easier to add new boards for a SoC architecture and add a custom config header or custom board handler for a platform.

This drops the board CONFIGs and the duplicate boards configs headers in favor of a single meson64.h config header.

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/mach-meson/Kconfig | 75 +++++++++++++++++++-------------------- board/amlogic/odroid-c2/Kconfig | 12 ------- board/amlogic/p212/Kconfig | 12 ------- board/amlogic/q200/Kconfig | 12 ------- configs/khadas-vim2_defconfig | 1 - configs/khadas-vim_defconfig | 1 - configs/libretech-cc_defconfig | 1 - configs/nanopi-k2_defconfig | 2 -- configs/odroid-c2_defconfig | 1 - configs/p212_defconfig | 1 - include/configs/khadas-vim.h | 14 -------- include/configs/libretech-cc.h | 14 -------- include/configs/meson-gx-common.h | 52 --------------------------- include/configs/meson64.h | 55 ++++++++++++++++++++++++++++ include/configs/nanopi-k2.h | 12 ------- include/configs/odroid-c2.h | 12 ------- include/configs/p212.h | 14 -------- include/configs/q200.h | 18 ---------- 18 files changed, 92 insertions(+), 217 deletions(-) delete mode 100644 board/amlogic/odroid-c2/Kconfig delete mode 100644 board/amlogic/p212/Kconfig delete mode 100644 board/amlogic/q200/Kconfig delete mode 100644 include/configs/khadas-vim.h delete mode 100644 include/configs/libretech-cc.h delete mode 100644 include/configs/meson-gx-common.h create mode 100644 include/configs/meson64.h delete mode 100644 include/configs/nanopi-k2.h delete mode 100644 include/configs/odroid-c2.h delete mode 100644 include/configs/p212.h delete mode 100644 include/configs/q200.h

diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index d86b1be..6f60167 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -8,49 +8,27 @@ config MESON64_COMMON select DM_SERIAL imply CMD_DM

-config MESON_GXBB - bool - select MESON64_COMMON - -config MESON_GXL - bool - select MESON64_COMMON - -config MESON_GXM - bool - select MESON64_COMMON - choice prompt "Platform select" - default TARGET_ODROID_C2 + default MESON_GXBB

-config TARGET_ODROID_C2 - bool "ODROID-C2" - select MESON_GXBB +config MESON_GXBB + bool "GXBB" + select MESON64_COMMON help - ODROID-C2 is a single board computer based on Meson GXBaby - with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD - slot, eMMC, IR receiver and a 40-pin GPIO header. - You should also select this TARGET if you have an nanopi-k2 + Select this if your SoC is an S905

-config TARGET_P212 - bool "P212" - select MESON_GXL +config MESON_GXL + bool "GXL" + select MESON64_COMMON help - P212 is a reference dessign board based on Meson GXL S905X SoC - with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot, - eMMC, IR receiver, CVBS+Audio jack and a SDIO WiFi module. - You should also select this TARGET if you have Khadas Vim or - a libretech aml-s905x-cc + Select this if your SoC is an S905X/D or S805X

-config TARGET_Q200 - bool "KHADAS-VIM2" - select MESON_GXM +config MESON_GXM + bool "GXM" + select MESON64_COMMON help - Q200 is a reference dessign board based on Meson GXM - with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot, - eMMC, IR receiver. - You should also select this TARGET if you have Khadas Vim2. + Select this if your SoC is an S912

endchoice

@@ -60,10 +38,31 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x1000

-source "board/amlogic/odroid-c2/Kconfig" +config SYS_VENDOR + string "Vendor name" + default "amlogic" + help + This option contains information about board name. + Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will + be used.

-source "board/amlogic/p212/Kconfig" +config SYS_BOARD + string "Board name" + default "odroid-c2" if MESON_GXBB + default "p212" if MESON_GXL + default "q200" if MESON_GXM + default "" + help + This option contains information about board name. + Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will + be used.

-source "board/amlogic/q200/Kconfig" +config SYS_CONFIG_NAME + string "Board configuration name" + default "meson64" + help + This option contains information about board configuration name. + Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header + will be used for board configuration.

endif diff --git a/board/amlogic/odroid-c2/Kconfig b/board/amlogic/odroid-c2/Kconfig deleted file mode 100644 index 2b16889..0000000 --- a/board/amlogic/odroid-c2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ODROID_C2 - -config SYS_BOARD - default "odroid-c2" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "odroid-c2" - -endif diff --git a/board/amlogic/p212/Kconfig b/board/amlogic/p212/Kconfig deleted file mode 100644 index 720c92b..0000000 --- a/board/amlogic/p212/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P212 - -config SYS_BOARD - default "p212" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "p212" - -endif diff --git a/board/amlogic/q200/Kconfig b/board/amlogic/q200/Kconfig deleted file mode 100644 index cfaf379..0000000 --- a/board/amlogic/q200/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_Q200 - -config SYS_BOARD - default "q200" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "q200" - -endif diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index 387d7da..40e7cac 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXM=y -CONFIG_TARGET_Q200=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index af30113..6e855dd 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXL=y -CONFIG_TARGET_P212=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim" diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index 7526516..c2f985f 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXL=y -CONFIG_TARGET_P212=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-cc" diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig index 01196d6..8bbf48f 100644 --- a/configs/nanopi-k2_defconfig +++ b/configs/nanopi-k2_defconfig @@ -1,8 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 -CONFIG_MESON_GXBB=y -CONFIG_TARGET_ODROID_C2=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" nanopi-k2" diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 19196b3..68554ba 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXBB=y -CONFIG_TARGET_ODROID_C2=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-c2" diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 9e3b1d6..a15064d 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXL=y -CONFIG_TARGET_P212=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p212" diff --git a/include/configs/khadas-vim.h b/include/configs/khadas-vim.h deleted file mode 100644 index ff87c02..0000000 --- a/include/configs/khadas-vim.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Khadas VIM - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/libretech-cc.h b/include/configs/libretech-cc.h deleted file mode 100644 index 95e0f34..0000000 --- a/include/configs/libretech-cc.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for LibreTech CC - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/meson-gx-common.h b/include/configs/meson-gx-common.h deleted file mode 100644 index c436976..0000000 --- a/include/configs/meson-gx-common.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Amlogic Meson GX SoCs - * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com - */ - -#ifndef __MESON_GX_COMMON_CONFIG_H -#define __MESON_GX_COMMON_CONFIG_H - -#define CONFIG_CPU_ARMV8 -#define CONFIG_REMAKE_ELF -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_MALLOC_LEN (32 << 20) -#define CONFIG_SYS_CBSIZE 1024 - -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE - -/* Generic Interrupt Controller Definitions */ -#define GICD_BASE 0xc4301000 -#define GICC_BASE 0xc4302000 - -#ifdef CONFIG_CMD_USB -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) -#else -#define BOOT_TARGET_DEVICES_USB(func) -#endif - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 1) \ - func(MMC, mmc, 2) \ - BOOT_TARGET_DEVICES_USB(func) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_addr_r=0x01000000\0" \ - "scriptaddr=0x1f000000\0" \ - "kernel_addr_r=0x01080000\0" \ - "pxefile_addr_r=0x01080000\0" \ - "ramdisk_addr_r=0x13000000\0" \ - "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - BOOTENV - -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ - -#endif /* __MESON_GX_COMMON_CONFIG_H */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h new file mode 100644 index 0000000..1929a3e --- /dev/null +++ b/include/configs/meson64.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration for Amlogic Meson 64bits SoCs + * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com + */ + +#ifndef __MESON64_CONFIG_H +#define __MESON64_CONFIG_H + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xc4301000 +#define GICC_BASE 0xc4302000 + +#define CONFIG_CPU_ARMV8 +#define CONFIG_REMAKE_ELF +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_MALLOC_LEN (32 << 20) +#define CONFIG_SYS_CBSIZE 1024 + +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ + +#ifdef CONFIG_CMD_USB +#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) +#else +#define BOOT_TARGET_DEVICES_USB(func) +#endif + +#ifndef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + BOOT_TARGET_DEVICES_USB(func) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#endif + +#ifndef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_addr_r=0x01000000\0" \ + "scriptaddr=0x1f000000\0" \ + "kernel_addr_r=0x01080000\0" \ + "pxefile_addr_r=0x01080000\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + BOOTENV +#endif + +#include <config_distro_bootcmd.h> + +#endif /* __MESON64_CONFIG_H */ diff --git a/include/configs/nanopi-k2.h b/include/configs/nanopi-k2.h deleted file mode 100644 index 3fd6e8f..0000000 --- a/include/configs/nanopi-k2.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for NANOPI-K2 - * (C) Copyright 2018 Thomas McKahan - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/odroid-c2.h b/include/configs/odroid-c2.h deleted file mode 100644 index 87e3ddb..0000000 --- a/include/configs/odroid-c2.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for ODROID-C2 - * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/p212.h b/include/configs/p212.h deleted file mode 100644 index 4414293..0000000 --- a/include/configs/p212.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Amlogic P212 - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/q200.h b/include/configs/q200.h deleted file mode 100644 index 7ef8f42..0000000 --- a/include/configs/q200.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Khadas VIM2 - * - * Copyright (C) 2017 Baylibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MISC_INIT_R - -#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" - -#include <configs/meson-gx-common.h> - -#endif /* __CONFIG_H */

From: Jerome Brunet jbrunet@baylibre.com

In preparation of supporting the new Amlogix AGX SoCs, we need to move the Amlogic GX pinmux functions out of the common code to be able to add a different set of SoC specific pinmux functions for AXG.

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- drivers/pinctrl/meson/Kconfig | 8 +- drivers/pinctrl/meson/Makefile | 1 + drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c | 97 ++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson-gx.h | 48 ++++++++++++ drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 6 +- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 6 +- drivers/pinctrl/meson/pinctrl-meson.c | 109 ++++----------------------- drivers/pinctrl/meson/pinctrl-meson.h | 37 +++++---- 8 files changed, 191 insertions(+), 121 deletions(-) create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx.h

diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig index 27ba890..15a8d9c 100644 --- a/drivers/pinctrl/meson/Kconfig +++ b/drivers/pinctrl/meson/Kconfig @@ -4,12 +4,16 @@ config PINCTRL_MESON depends on PINCTRL_GENERIC bool

+config PINCTRL_MESON_GX_PMX + select PINCTRL_MESON + bool + config PINCTRL_MESON_GXBB bool "Amlogic Meson GXBB SoC pinctrl driver" - select PINCTRL_MESON + select PINCTRL_MESON_GX_PMX

config PINCTRL_MESON_GXL bool "Amlogic Meson GXL SoC pinctrl driver" - select PINCTRL_MESON + select PINCTRL_MESON_GX_PMX

endif diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile index 965092c..30b6875 100644 --- a/drivers/pinctrl/meson/Makefile +++ b/drivers/pinctrl/meson/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

obj-y += pinctrl-meson.o +obj-$(CONFIG_PINCTRL_MESON_GX_PMX) += pinctrl-meson-gx-pmx.o obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o diff --git a/drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c b/drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c new file mode 100644 index 0000000..fc1538e --- /dev/null +++ b/drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 - Beniamino Galvani b.galvani@gmail.com + */ + +#include <asm/gpio.h> +#include <common.h> +#include <dm.h> +#include <dm/pinctrl.h> +#include <linux/io.h> +#include "pinctrl-meson-gx.h" + +static void meson_gx_pinmux_disable_other_groups(struct meson_pinctrl *priv, + unsigned int pin, + int sel_group) +{ + struct meson_pmx_group *group; + struct meson_gx_pmx_data *pmx_data; + void __iomem *addr; + int i, j; + + for (i = 0; i < priv->data->num_groups; i++) { + group = &priv->data->groups[i]; + pmx_data = (struct meson_gx_pmx_data *)group->data; + if (pmx_data->is_gpio || i == sel_group) + continue; + + for (j = 0; j < group->num_pins; j++) { + if (group->pins[j] == pin) { + /* We have found a group using the pin */ + debug("pinmux: disabling %s\n", group->name); + addr = priv->reg_mux + pmx_data->reg * 4; + writel(readl(addr) & ~BIT(pmx_data->bit), addr); + } + } + } +} + +static int meson_gx_pinmux_group_set(struct udevice *dev, + unsigned int group_selector, + unsigned int func_selector) +{ + struct meson_pinctrl *priv = dev_get_priv(dev); + const struct meson_pmx_group *group; + const struct meson_pmx_func *func; + struct meson_gx_pmx_data *pmx_data; + void __iomem *addr; + int i; + + group = &priv->data->groups[group_selector]; + pmx_data = (struct meson_gx_pmx_data *)group->data; + func = &priv->data->funcs[func_selector]; + + debug("pinmux: set group %s func %s\n", group->name, func->name); + + /* + * Disable groups using the same pins. + * The selected group is not disabled to avoid glitches. + */ + for (i = 0; i < group->num_pins; i++) { + meson_gx_pinmux_disable_other_groups(priv, + group->pins[i], + group_selector); + } + + /* Function 0 (GPIO) doesn't need any additional setting */ + if (func_selector) { + addr = priv->reg_mux + pmx_data->reg * 4; + writel(readl(addr) | BIT(pmx_data->bit), addr); + } + + return 0; +} + +const struct pinctrl_ops meson_gx_pinctrl_ops = { + .get_groups_count = meson_pinctrl_get_groups_count, + .get_group_name = meson_pinctrl_get_group_name, + .get_functions_count = meson_pinmux_get_functions_count, + .get_function_name = meson_pinmux_get_function_name, + .pinmux_group_set = meson_gx_pinmux_group_set, + .set_state = pinctrl_generic_set_state, +}; + +static const struct dm_gpio_ops meson_gx_gpio_ops = { + .set_value = meson_gpio_set, + .get_value = meson_gpio_get, + .get_function = meson_gpio_get_direction, + .direction_input = meson_gpio_direction_input, + .direction_output = meson_gpio_direction_output, +}; + +const struct driver meson_gx_gpio_driver = { + .name = "meson-gx-gpio", + .id = UCLASS_GPIO, + .probe = meson_gpio_probe, + .ops = &meson_gx_gpio_ops, +}; diff --git a/drivers/pinctrl/meson/pinctrl-meson-gx.h b/drivers/pinctrl/meson/pinctrl-meson-gx.h new file mode 100644 index 0000000..4c1aa1a --- /dev/null +++ b/drivers/pinctrl/meson/pinctrl-meson-gx.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014 Beniamino Galvani b.galvani@gmail.com + * Copyright (C) 2017 Jerome Brunet jbrunet@baylibre.com + */ + +#ifndef __PINCTRL_MESON_GX_H__ +#define __PINCTRL_MESON_GX_H__ + +#include "pinctrl-meson.h" + +struct meson_gx_pmx_data { + bool is_gpio; + unsigned int reg; + unsigned int bit; +}; + +#define PMX_DATA(r, b, g) \ + { \ + .reg = r, \ + .bit = b, \ + .is_gpio = g, \ + } + +#define GROUP(grp, r, b) \ + { \ + .name = #grp, \ + .pins = grp ## _pins, \ + .num_pins = ARRAY_SIZE(grp ## _pins), \ + .data = (const struct meson_gx_pmx_data[]){ \ + PMX_DATA(r, b, false), \ + }, \ + } + +#define GPIO_GROUP(gpio, b) \ + { \ + .name = #gpio, \ + .pins = (const unsigned int[]){ PIN(gpio, b) }, \ + .num_pins = 1, \ + .data = (const struct meson_gx_pmx_data[]){ \ + PMX_DATA(0, 0, true), \ + }, \ + } + +extern const struct pinctrl_ops meson_gx_pinctrl_ops; +extern const struct driver meson_gx_gpio_driver; + +#endif /* __PINCTRL_MESON_GX_H__ */ diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index a8e47e3..22e8b05 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -11,7 +11,7 @@ #include <dm/pinctrl.h> #include <dt-bindings/gpio/meson-gxbb-gpio.h>

-#include "pinctrl-meson.h" +#include "pinctrl-meson-gx.h"

#define EE_OFF 15

@@ -417,6 +417,7 @@ struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = { .num_groups = ARRAY_SIZE(meson_gxbb_periphs_groups), .num_funcs = ARRAY_SIZE(meson_gxbb_periphs_functions), .num_banks = ARRAY_SIZE(meson_gxbb_periphs_banks), + .gpio_driver = &meson_gx_gpio_driver, };

struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { @@ -429,6 +430,7 @@ struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data = { .num_groups = ARRAY_SIZE(meson_gxbb_aobus_groups), .num_funcs = ARRAY_SIZE(meson_gxbb_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxbb_aobus_banks), + .gpio_driver = &meson_gx_gpio_driver, };

static const struct udevice_id meson_gxbb_pinctrl_match[] = { @@ -449,5 +451,5 @@ U_BOOT_DRIVER(meson_gxbb_pinctrl) = { .of_match = of_match_ptr(meson_gxbb_pinctrl_match), .probe = meson_pinctrl_probe, .priv_auto_alloc_size = sizeof(struct meson_pinctrl), - .ops = &meson_pinctrl_ops, + .ops = &meson_gx_pinctrl_ops, }; diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index ba6e353..1819eee 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -11,7 +11,7 @@ #include <dm/pinctrl.h> #include <dt-bindings/gpio/meson-gxl-gpio.h>

-#include "pinctrl-meson.h" +#include "pinctrl-meson-gx.h"

#define EE_OFF 11

@@ -699,6 +699,7 @@ struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = { .num_groups = ARRAY_SIZE(meson_gxl_periphs_groups), .num_funcs = ARRAY_SIZE(meson_gxl_periphs_functions), .num_banks = ARRAY_SIZE(meson_gxl_periphs_banks), + .gpio_driver = &meson_gx_gpio_driver, };

struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { @@ -711,6 +712,7 @@ struct meson_pinctrl_data meson_gxl_aobus_pinctrl_data = { .num_groups = ARRAY_SIZE(meson_gxl_aobus_groups), .num_funcs = ARRAY_SIZE(meson_gxl_aobus_functions), .num_banks = ARRAY_SIZE(meson_gxl_aobus_banks), + .gpio_driver = &meson_gx_gpio_driver, };

static const struct udevice_id meson_gxl_pinctrl_match[] = { @@ -731,5 +733,5 @@ U_BOOT_DRIVER(meson_gxl_pinctrl) = { .of_match = of_match_ptr(meson_gxl_pinctrl_match), .probe = meson_pinctrl_probe, .priv_auto_alloc_size = sizeof(struct meson_pinctrl), - .ops = &meson_pinctrl_ops, + .ops = &meson_gx_pinctrl_ops, }; diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 387c241..0bd6152 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -20,15 +20,15 @@ DECLARE_GLOBAL_DATA_PTR;

static const char *meson_pinctrl_dummy_name = "_dummy";

-static int meson_pinctrl_get_groups_count(struct udevice *dev) +int meson_pinctrl_get_groups_count(struct udevice *dev) { struct meson_pinctrl *priv = dev_get_priv(dev);

return priv->data->num_groups; }

-static const char *meson_pinctrl_get_group_name(struct udevice *dev, - unsigned selector) +const char *meson_pinctrl_get_group_name(struct udevice *dev, + unsigned int selector) { struct meson_pinctrl *priv = dev_get_priv(dev);

@@ -38,87 +38,21 @@ static const char *meson_pinctrl_get_group_name(struct udevice *dev, return priv->data->groups[selector].name; }

-static int meson_pinmux_get_functions_count(struct udevice *dev) +int meson_pinmux_get_functions_count(struct udevice *dev) { struct meson_pinctrl *priv = dev_get_priv(dev);

return priv->data->num_funcs; }

-static const char *meson_pinmux_get_function_name(struct udevice *dev, - unsigned selector) +const char *meson_pinmux_get_function_name(struct udevice *dev, + unsigned int selector) { struct meson_pinctrl *priv = dev_get_priv(dev);

return priv->data->funcs[selector].name; }

-static void meson_pinmux_disable_other_groups(struct meson_pinctrl *priv, - unsigned int pin, int sel_group) -{ - struct meson_pmx_group *group; - void __iomem *addr; - int i, j; - - for (i = 0; i < priv->data->num_groups; i++) { - group = &priv->data->groups[i]; - if (group->is_gpio || i == sel_group) - continue; - - for (j = 0; j < group->num_pins; j++) { - if (group->pins[j] == pin) { - /* We have found a group using the pin */ - debug("pinmux: disabling %s\n", group->name); - addr = priv->reg_mux + group->reg * 4; - writel(readl(addr) & ~BIT(group->bit), addr); - } - } - } -} - -static int meson_pinmux_group_set(struct udevice *dev, - unsigned group_selector, - unsigned func_selector) -{ - struct meson_pinctrl *priv = dev_get_priv(dev); - const struct meson_pmx_group *group; - const struct meson_pmx_func *func; - void __iomem *addr; - int i; - - group = &priv->data->groups[group_selector]; - func = &priv->data->funcs[func_selector]; - - debug("pinmux: set group %s func %s\n", group->name, func->name); - - /* - * Disable groups using the same pins. - * The selected group is not disabled to avoid glitches. - */ - for (i = 0; i < group->num_pins; i++) { - meson_pinmux_disable_other_groups(priv, - group->pins[i], - group_selector); - } - - /* Function 0 (GPIO) doesn't need any additional setting */ - if (func_selector) { - addr = priv->reg_mux + group->reg * 4; - writel(readl(addr) | BIT(group->bit), addr); - } - - return 0; -} - -const struct pinctrl_ops meson_pinctrl_ops = { - .get_groups_count = meson_pinctrl_get_groups_count, - .get_group_name = meson_pinctrl_get_group_name, - .get_functions_count = meson_pinmux_get_functions_count, - .get_function_name = meson_pinmux_get_function_name, - .pinmux_group_set = meson_pinmux_group_set, - .set_state = pinctrl_generic_set_state, -}; - static int meson_gpio_calc_reg_and_bit(struct udevice *dev, unsigned int offset, enum meson_reg_type reg_type, unsigned int *reg, unsigned int *bit) @@ -149,7 +83,7 @@ static int meson_gpio_calc_reg_and_bit(struct udevice *dev, unsigned int offset, return 0; }

-static int meson_gpio_get(struct udevice *dev, unsigned int offset) +int meson_gpio_get(struct udevice *dev, unsigned int offset) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); unsigned int reg, bit; @@ -162,7 +96,7 @@ static int meson_gpio_get(struct udevice *dev, unsigned int offset) return !!(readl(priv->reg_gpio + reg) & BIT(bit)); }

-static int meson_gpio_set(struct udevice *dev, unsigned int offset, int value) +int meson_gpio_set(struct udevice *dev, unsigned int offset, int value) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); unsigned int reg, bit; @@ -177,7 +111,7 @@ static int meson_gpio_set(struct udevice *dev, unsigned int offset, int value) return 0; }

-static int meson_gpio_get_direction(struct udevice *dev, unsigned int offset) +int meson_gpio_get_direction(struct udevice *dev, unsigned int offset) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); unsigned int reg, bit, val; @@ -192,7 +126,7 @@ static int meson_gpio_get_direction(struct udevice *dev, unsigned int offset) return (val & BIT(bit)) ? GPIOF_INPUT : GPIOF_OUTPUT; }

-static int meson_gpio_direction_input(struct udevice *dev, unsigned int offset) +int meson_gpio_direction_input(struct udevice *dev, unsigned int offset) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); unsigned int reg, bit; @@ -207,8 +141,8 @@ static int meson_gpio_direction_input(struct udevice *dev, unsigned int offset) return 0; }

-static int meson_gpio_direction_output(struct udevice *dev, - unsigned int offset, int value) +int meson_gpio_direction_output(struct udevice *dev, + unsigned int offset, int value) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); unsigned int reg, bit; @@ -229,7 +163,7 @@ static int meson_gpio_direction_output(struct udevice *dev, return 0; }

-static int meson_gpio_probe(struct udevice *dev) +int meson_gpio_probe(struct udevice *dev) { struct meson_pinctrl *priv = dev_get_priv(dev->parent); struct gpio_dev_priv *uc_priv; @@ -241,21 +175,6 @@ static int meson_gpio_probe(struct udevice *dev) return 0; }

-static const struct dm_gpio_ops meson_gpio_ops = { - .set_value = meson_gpio_set, - .get_value = meson_gpio_get, - .get_function = meson_gpio_get_direction, - .direction_input = meson_gpio_direction_input, - .direction_output = meson_gpio_direction_output, -}; - -static struct driver meson_gpio_driver = { - .name = "meson-gpio", - .id = UCLASS_GPIO, - .probe = meson_gpio_probe, - .ops = &meson_gpio_ops, -}; - static fdt_addr_t parse_address(int offset, const char *name, int na, int ns) { int index, len = 0; @@ -334,7 +253,7 @@ int meson_pinctrl_probe(struct udevice *dev) sprintf(name, "meson-gpio");

/* Create child device UCLASS_GPIO and bind it */ - device_bind(dev, &meson_gpio_driver, name, NULL, gpio, &gpio_dev); + device_bind(dev, priv->data->gpio_driver, name, NULL, gpio, &gpio_dev); dev_set_of_offset(gpio_dev, gpio);

return 0; diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h index 6ec89ba..bdee721 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.h +++ b/drivers/pinctrl/meson/pinctrl-meson.h @@ -12,9 +12,7 @@ struct meson_pmx_group { const char *name; const unsigned int *pins; unsigned int num_pins; - bool is_gpio; - unsigned int reg; - unsigned int bit; + const void *data; };

struct meson_pmx_func { @@ -33,6 +31,8 @@ struct meson_pinctrl_data { unsigned int num_groups; unsigned int num_funcs; unsigned int num_banks; + const struct driver *gpio_driver; + void *pmx_data; };

struct meson_pinctrl { @@ -89,23 +89,6 @@ struct meson_bank {

#define PIN(x, b) (b + x)

-#define GROUP(grp, r, b) \ - { \ - .name = #grp, \ - .pins = grp ## _pins, \ - .num_pins = ARRAY_SIZE(grp ## _pins), \ - .reg = r, \ - .bit = b, \ - } - -#define GPIO_GROUP(gpio, b) \ - { \ - .name = #gpio, \ - .pins = (const unsigned int[]){ PIN(gpio, b) }, \ - .num_pins = 1, \ - .is_gpio = true, \ - } - #define FUNCTION(fn) \ { \ .name = #fn, \ @@ -131,6 +114,20 @@ struct meson_bank {

extern const struct pinctrl_ops meson_pinctrl_ops;

+int meson_pinctrl_get_groups_count(struct udevice *dev); +const char *meson_pinctrl_get_group_name(struct udevice *dev, + unsigned int selector); +int meson_pinmux_get_functions_count(struct udevice *dev); +const char *meson_pinmux_get_function_name(struct udevice *dev, + unsigned int selector); int meson_pinctrl_probe(struct udevice *dev);

+int meson_gpio_get(struct udevice *dev, unsigned int offset); +int meson_gpio_set(struct udevice *dev, unsigned int offset, int value); +int meson_gpio_get_direction(struct udevice *dev, unsigned int offset); +int meson_gpio_direction_input(struct udevice *dev, unsigned int offset); +int meson_gpio_direction_output(struct udevice *dev, unsigned int offset, + int value); +int meson_gpio_probe(struct udevice *dev); + #endif /* __PINCTRL_MESON_H__ */

From: Jerome Brunet jbrunet@baylibre.com

This adds support for the Amlogic AXG SoC pinctrl and GPIO controller using a specific set of pinctrl functions which differs from the GX SoCs.

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- drivers/pinctrl/meson/Kconfig | 8 + drivers/pinctrl/meson/Makefile | 2 + drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c | 125 ++++ drivers/pinctrl/meson/pinctrl-meson-axg.c | 979 ++++++++++++++++++++++++++ drivers/pinctrl/meson/pinctrl-meson-axg.h | 66 ++ 5 files changed, 1180 insertions(+) create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.h

diff --git a/drivers/pinctrl/meson/Kconfig b/drivers/pinctrl/meson/Kconfig index fc51b43..ee820a5 100644 --- a/drivers/pinctrl/meson/Kconfig +++ b/drivers/pinctrl/meson/Kconfig @@ -8,6 +8,10 @@ config PINCTRL_MESON_GX_PMX select PINCTRL_MESON bool

+config PINCTRL_MESON_AXG_PMX + select PINCTRL_MESON + bool + config PINCTRL_MESON_GXBB bool "Amlogic Meson GXBB SoC pinctrl driver" select PINCTRL_MESON_GX_PMX @@ -16,4 +20,8 @@ config PINCTRL_MESON_GXL bool "Amlogic Meson GXL SoC pinctrl driver" select PINCTRL_MESON_GX_PMX

+config PINCTRL_MESON_AXG + bool "Amlogic Meson AXG SoC pinctrl driver" + select PINCTRL_MESON_AXG_PMX + endif diff --git a/drivers/pinctrl/meson/Makefile b/drivers/pinctrl/meson/Makefile index 30b6875..707287c 100644 --- a/drivers/pinctrl/meson/Makefile +++ b/drivers/pinctrl/meson/Makefile @@ -2,5 +2,7 @@

obj-y += pinctrl-meson.o obj-$(CONFIG_PINCTRL_MESON_GX_PMX) += pinctrl-meson-gx-pmx.o +obj-$(CONFIG_PINCTRL_MESON_AXG_PMX) += pinctrl-meson-axg-pmx.o obj-$(CONFIG_PINCTRL_MESON_GXBB) += pinctrl-meson-gxbb.o obj-$(CONFIG_PINCTRL_MESON_GXL) += pinctrl-meson-gxl.o +obj-$(CONFIG_PINCTRL_MESON_AXG) += pinctrl-meson-axg.o diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c new file mode 100644 index 0000000..9c751ee --- /dev/null +++ b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Jerome Brunet jbrunet@baylibre.com + * Copyright (C) 2017 Xingyu Chen xingyu.chen@amlogic.com + */ + +#include <asm/gpio.h> +#include <common.h> +#include <dm.h> +#include <dm/pinctrl.h> +#include <linux/io.h> +#include "pinctrl-meson-axg.h" + +static int meson_axg_pmx_get_bank(struct udevice *dev, unsigned int pin, + struct meson_pmx_bank **bank) +{ + int i; + struct meson_pinctrl *priv = dev_get_priv(dev); + struct meson_axg_pmx_data *pmx = priv->data->pmx_data; + + for (i = 0; i < pmx->num_pmx_banks; i++) + if (pin >= pmx->pmx_banks[i].first && + pin <= pmx->pmx_banks[i].last) { + *bank = &pmx->pmx_banks[i]; + return 0; + } + + return -EINVAL; +} + +static int meson_axg_pmx_calc_reg_and_offset(struct meson_pmx_bank *bank, + unsigned int pin, + unsigned int *reg, + unsigned int *offset) +{ + int shift; + + shift = pin - bank->first; + + *reg = bank->reg + (bank->offset + (shift << 2)) / 32; + *offset = (bank->offset + (shift << 2)) % 32; + + return 0; +} + +static int meson_axg_pmx_update_function(struct udevice *dev, + unsigned int pin, unsigned int func) +{ + struct meson_pinctrl *priv = dev_get_priv(dev); + struct meson_pmx_bank *bank; + unsigned int offset; + unsigned int reg; + unsigned int tmp; + int ret; + + ret = meson_axg_pmx_get_bank(dev, pin, &bank); + if (ret) + return ret; + + meson_axg_pmx_calc_reg_and_offset(bank, pin, &reg, &offset); + + tmp = readl(priv->reg_mux + (reg << 2)); + tmp &= ~(0xf << offset); + tmp |= (func & 0xf) << offset; + writel(tmp, priv->reg_mux + (reg << 2)); + + return ret; +} + +static int meson_axg_pinmux_group_set(struct udevice *dev, + unsigned int group_selector, + unsigned int func_selector) +{ + struct meson_pinctrl *priv = dev_get_priv(dev); + const struct meson_pmx_group *group; + const struct meson_pmx_func *func; + struct meson_pmx_axg_data *pmx_data; + int i, ret; + + group = &priv->data->groups[group_selector]; + pmx_data = (struct meson_pmx_axg_data *)group->data; + func = &priv->data->funcs[func_selector]; + + debug("pinmux: set group %s func %s\n", group->name, func->name); + + for (i = 0; i < group->num_pins; i++) { + ret = meson_axg_pmx_update_function(dev, group->pins[i], + pmx_data->func); + if (ret) + return ret; + } + + return 0; +} + +const struct pinctrl_ops meson_axg_pinctrl_ops = { + .get_groups_count = meson_pinctrl_get_groups_count, + .get_group_name = meson_pinctrl_get_group_name, + .get_functions_count = meson_pinmux_get_functions_count, + .get_function_name = meson_pinmux_get_function_name, + .pinmux_group_set = meson_axg_pinmux_group_set, + .set_state = pinctrl_generic_set_state, +}; + +static int meson_axg_gpio_request(struct udevice *dev, + unsigned int offset, const char *label) +{ + return meson_axg_pmx_update_function(dev, offset, 0); +} + +static const struct dm_gpio_ops meson_axg_gpio_ops = { + .request = meson_axg_gpio_request, + .set_value = meson_gpio_set, + .get_value = meson_gpio_get, + .get_function = meson_gpio_get_direction, + .direction_input = meson_gpio_direction_input, + .direction_output = meson_gpio_direction_output, +}; + +const struct driver meson_axg_gpio_driver = { + .name = "meson-axg-gpio", + .id = UCLASS_GPIO, + .probe = meson_gpio_probe, + .ops = &meson_axg_gpio_ops, +}; diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.c b/drivers/pinctrl/meson/pinctrl-meson-axg.c new file mode 100644 index 0000000..ab51652 --- /dev/null +++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c @@ -0,0 +1,979 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright (C) 2018 Neil Armstrong narmstrong@baylibre.com + * + * Based on code from Linux kernel: + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + * Author: Xingyu Chen xingyu.chen@amlogic.com + */ + +#include <common.h> +#include <dm.h> +#include <dm/pinctrl.h> +#include <dt-bindings/gpio/meson-axg-gpio.h> + +#include "pinctrl-meson-axg.h" + +#define EE_OFF 14 + +/* emmc */ +static const unsigned int emmc_nand_d0_pins[] = {BOOT_0}; +static const unsigned int emmc_nand_d1_pins[] = {BOOT_1}; +static const unsigned int emmc_nand_d2_pins[] = {BOOT_2}; +static const unsigned int emmc_nand_d3_pins[] = {BOOT_3}; +static const unsigned int emmc_nand_d4_pins[] = {BOOT_4}; +static const unsigned int emmc_nand_d5_pins[] = {BOOT_5}; +static const unsigned int emmc_nand_d6_pins[] = {BOOT_6}; +static const unsigned int emmc_nand_d7_pins[] = {BOOT_7}; + +static const unsigned int emmc_clk_pins[] = {BOOT_8}; +static const unsigned int emmc_cmd_pins[] = {BOOT_10}; +static const unsigned int emmc_ds_pins[] = {BOOT_13}; + +/* nand */ +static const unsigned int nand_ce0_pins[] = {BOOT_8}; +static const unsigned int nand_ale_pins[] = {BOOT_9}; +static const unsigned int nand_cle_pins[] = {BOOT_10}; +static const unsigned int nand_wen_clk_pins[] = {BOOT_11}; +static const unsigned int nand_ren_wr_pins[] = {BOOT_12}; +static const unsigned int nand_rb0_pins[] = {BOOT_13}; + +/* nor */ +static const unsigned int nor_hold_pins[] = {BOOT_3}; +static const unsigned int nor_d_pins[] = {BOOT_4}; +static const unsigned int nor_q_pins[] = {BOOT_5}; +static const unsigned int nor_c_pins[] = {BOOT_6}; +static const unsigned int nor_wp_pins[] = {BOOT_9}; +static const unsigned int nor_cs_pins[] = {BOOT_14}; + +/* sdio */ +static const unsigned int sdio_d0_pins[] = {GPIOX_0}; +static const unsigned int sdio_d1_pins[] = {GPIOX_1}; +static const unsigned int sdio_d2_pins[] = {GPIOX_2}; +static const unsigned int sdio_d3_pins[] = {GPIOX_3}; +static const unsigned int sdio_clk_pins[] = {GPIOX_4}; +static const unsigned int sdio_cmd_pins[] = {GPIOX_5}; + +/* spi0 */ +static const unsigned int spi0_clk_pins[] = {GPIOZ_0}; +static const unsigned int spi0_mosi_pins[] = {GPIOZ_1}; +static const unsigned int spi0_miso_pins[] = {GPIOZ_2}; +static const unsigned int spi0_ss0_pins[] = {GPIOZ_3}; +static const unsigned int spi0_ss1_pins[] = {GPIOZ_4}; +static const unsigned int spi0_ss2_pins[] = {GPIOZ_5}; + +/* spi1 */ +static const unsigned int spi1_clk_x_pins[] = {GPIOX_19}; +static const unsigned int spi1_mosi_x_pins[] = {GPIOX_17}; +static const unsigned int spi1_miso_x_pins[] = {GPIOX_18}; +static const unsigned int spi1_ss0_x_pins[] = {GPIOX_16}; + +static const unsigned int spi1_clk_a_pins[] = {GPIOA_4}; +static const unsigned int spi1_mosi_a_pins[] = {GPIOA_2}; +static const unsigned int spi1_miso_a_pins[] = {GPIOA_3}; +static const unsigned int spi1_ss0_a_pins[] = {GPIOA_5}; +static const unsigned int spi1_ss1_pins[] = {GPIOA_6}; + +/* i2c0 */ +static const unsigned int i2c0_sck_pins[] = {GPIOZ_6}; +static const unsigned int i2c0_sda_pins[] = {GPIOZ_7}; + +/* i2c1 */ +static const unsigned int i2c1_sck_z_pins[] = {GPIOZ_8}; +static const unsigned int i2c1_sda_z_pins[] = {GPIOZ_9}; + +static const unsigned int i2c1_sck_x_pins[] = {GPIOX_16}; +static const unsigned int i2c1_sda_x_pins[] = {GPIOX_17}; + +/* i2c2 */ +static const unsigned int i2c2_sck_x_pins[] = {GPIOX_18}; +static const unsigned int i2c2_sda_x_pins[] = {GPIOX_19}; + +static const unsigned int i2c2_sda_a_pins[] = {GPIOA_17}; +static const unsigned int i2c2_sck_a_pins[] = {GPIOA_18}; + +/* i2c3 */ +static const unsigned int i2c3_sda_a6_pins[] = {GPIOA_6}; +static const unsigned int i2c3_sck_a7_pins[] = {GPIOA_7}; + +static const unsigned int i2c3_sda_a12_pins[] = {GPIOA_12}; +static const unsigned int i2c3_sck_a13_pins[] = {GPIOA_13}; + +static const unsigned int i2c3_sda_a19_pins[] = {GPIOA_19}; +static const unsigned int i2c3_sck_a20_pins[] = {GPIOA_20}; + +/* uart_a */ +static const unsigned int uart_rts_a_pins[] = {GPIOX_11}; +static const unsigned int uart_cts_a_pins[] = {GPIOX_10}; +static const unsigned int uart_tx_a_pins[] = {GPIOX_8}; +static const unsigned int uart_rx_a_pins[] = {GPIOX_9}; + +/* uart_b */ +static const unsigned int uart_rts_b_z_pins[] = {GPIOZ_0}; +static const unsigned int uart_cts_b_z_pins[] = {GPIOZ_1}; +static const unsigned int uart_tx_b_z_pins[] = {GPIOZ_2}; +static const unsigned int uart_rx_b_z_pins[] = {GPIOZ_3}; + +static const unsigned int uart_rts_b_x_pins[] = {GPIOX_18}; +static const unsigned int uart_cts_b_x_pins[] = {GPIOX_19}; +static const unsigned int uart_tx_b_x_pins[] = {GPIOX_16}; +static const unsigned int uart_rx_b_x_pins[] = {GPIOX_17}; + +/* uart_ao_b */ +static const unsigned int uart_ao_tx_b_z_pins[] = {GPIOZ_8}; +static const unsigned int uart_ao_rx_b_z_pins[] = {GPIOZ_9}; +static const unsigned int uart_ao_cts_b_z_pins[] = {GPIOZ_6}; +static const unsigned int uart_ao_rts_b_z_pins[] = {GPIOZ_7}; + +/* pwm_a */ +static const unsigned int pwm_a_z_pins[] = {GPIOZ_5}; + +static const unsigned int pwm_a_x18_pins[] = {GPIOX_18}; +static const unsigned int pwm_a_x20_pins[] = {GPIOX_20}; + +static const unsigned int pwm_a_a_pins[] = {GPIOA_14}; + +/* pwm_b */ +static const unsigned int pwm_b_z_pins[] = {GPIOZ_4}; + +static const unsigned int pwm_b_x_pins[] = {GPIOX_19}; + +static const unsigned int pwm_b_a_pins[] = {GPIOA_15}; + +/* pwm_c */ +static const unsigned int pwm_c_x10_pins[] = {GPIOX_10}; +static const unsigned int pwm_c_x17_pins[] = {GPIOX_17}; + +static const unsigned int pwm_c_a_pins[] = {GPIOA_16}; + +/* pwm_d */ +static const unsigned int pwm_d_x11_pins[] = {GPIOX_11}; +static const unsigned int pwm_d_x16_pins[] = {GPIOX_16}; + +/* pwm_vs */ +static const unsigned int pwm_vs_pins[] = {GPIOA_0}; + +/* spdif_in */ +static const unsigned int spdif_in_z_pins[] = {GPIOZ_4}; + +static const unsigned int spdif_in_a1_pins[] = {GPIOA_1}; +static const unsigned int spdif_in_a7_pins[] = {GPIOA_7}; +static const unsigned int spdif_in_a19_pins[] = {GPIOA_19}; +static const unsigned int spdif_in_a20_pins[] = {GPIOA_20}; + +/* spdif_out */ +static const unsigned int spdif_out_z_pins[] = {GPIOZ_5}; + +static const unsigned int spdif_out_a1_pins[] = {GPIOA_1}; +static const unsigned int spdif_out_a11_pins[] = {GPIOA_11}; +static const unsigned int spdif_out_a19_pins[] = {GPIOA_19}; +static const unsigned int spdif_out_a20_pins[] = {GPIOA_20}; + +/* jtag_ee */ +static const unsigned int jtag_tdo_x_pins[] = {GPIOX_0}; +static const unsigned int jtag_tdi_x_pins[] = {GPIOX_1}; +static const unsigned int jtag_clk_x_pins[] = {GPIOX_4}; +static const unsigned int jtag_tms_x_pins[] = {GPIOX_5}; + +/* eth */ +static const unsigned int eth_txd0_x_pins[] = {GPIOX_8}; +static const unsigned int eth_txd1_x_pins[] = {GPIOX_9}; +static const unsigned int eth_txen_x_pins[] = {GPIOX_10}; +static const unsigned int eth_rgmii_rx_clk_x_pins[] = {GPIOX_12}; +static const unsigned int eth_rxd0_x_pins[] = {GPIOX_13}; +static const unsigned int eth_rxd1_x_pins[] = {GPIOX_14}; +static const unsigned int eth_rx_dv_x_pins[] = {GPIOX_15}; +static const unsigned int eth_mdio_x_pins[] = {GPIOX_21}; +static const unsigned int eth_mdc_x_pins[] = {GPIOX_22}; + +static const unsigned int eth_txd0_y_pins[] = {GPIOY_10}; +static const unsigned int eth_txd1_y_pins[] = {GPIOY_11}; +static const unsigned int eth_txen_y_pins[] = {GPIOY_9}; +static const unsigned int eth_rgmii_rx_clk_y_pins[] = {GPIOY_2}; +static const unsigned int eth_rxd0_y_pins[] = {GPIOY_4}; +static const unsigned int eth_rxd1_y_pins[] = {GPIOY_5}; +static const unsigned int eth_rx_dv_y_pins[] = {GPIOY_3}; +static const unsigned int eth_mdio_y_pins[] = {GPIOY_0}; +static const unsigned int eth_mdc_y_pins[] = {GPIOY_1}; + +static const unsigned int eth_rxd2_rgmii_pins[] = {GPIOY_6}; +static const unsigned int eth_rxd3_rgmii_pins[] = {GPIOY_7}; +static const unsigned int eth_rgmii_tx_clk_pins[] = {GPIOY_8}; +static const unsigned int eth_txd2_rgmii_pins[] = {GPIOY_12}; +static const unsigned int eth_txd3_rgmii_pins[] = {GPIOY_13}; + +/* pdm */ +static const unsigned int pdm_dclk_a14_pins[] = {GPIOA_14}; +static const unsigned int pdm_dclk_a19_pins[] = {GPIOA_19}; +static const unsigned int pdm_din0_pins[] = {GPIOA_15}; +static const unsigned int pdm_din1_pins[] = {GPIOA_16}; +static const unsigned int pdm_din2_pins[] = {GPIOA_17}; +static const unsigned int pdm_din3_pins[] = {GPIOA_18}; + +/* mclk */ +static const unsigned int mclk_c_pins[] = {GPIOA_0}; +static const unsigned int mclk_b_pins[] = {GPIOA_1}; + +/* tdm */ +static const unsigned int tdma_sclk_pins[] = {GPIOX_12}; +static const unsigned int tdma_sclk_slv_pins[] = {GPIOX_12}; +static const unsigned int tdma_fs_pins[] = {GPIOX_13}; +static const unsigned int tdma_fs_slv_pins[] = {GPIOX_13}; +static const unsigned int tdma_din0_pins[] = {GPIOX_14}; +static const unsigned int tdma_dout0_x14_pins[] = {GPIOX_14}; +static const unsigned int tdma_dout0_x15_pins[] = {GPIOX_15}; +static const unsigned int tdma_dout1_pins[] = {GPIOX_15}; +static const unsigned int tdma_din1_pins[] = {GPIOX_15}; + +static const unsigned int tdmc_sclk_pins[] = {GPIOA_2}; +static const unsigned int tdmc_sclk_slv_pins[] = {GPIOA_2}; +static const unsigned int tdmc_fs_pins[] = {GPIOA_3}; +static const unsigned int tdmc_fs_slv_pins[] = {GPIOA_3}; +static const unsigned int tdmc_din0_pins[] = {GPIOA_4}; +static const unsigned int tdmc_dout0_pins[] = {GPIOA_4}; +static const unsigned int tdmc_din1_pins[] = {GPIOA_5}; +static const unsigned int tdmc_dout1_pins[] = {GPIOA_5}; +static const unsigned int tdmc_din2_pins[] = {GPIOA_6}; +static const unsigned int tdmc_dout2_pins[] = {GPIOA_6}; +static const unsigned int tdmc_din3_pins[] = {GPIOA_7}; +static const unsigned int tdmc_dout3_pins[] = {GPIOA_7}; + +static const unsigned int tdmb_sclk_pins[] = {GPIOA_8}; +static const unsigned int tdmb_sclk_slv_pins[] = {GPIOA_8}; +static const unsigned int tdmb_fs_pins[] = {GPIOA_9}; +static const unsigned int tdmb_fs_slv_pins[] = {GPIOA_9}; +static const unsigned int tdmb_din0_pins[] = {GPIOA_10}; +static const unsigned int tdmb_dout0_pins[] = {GPIOA_10}; +static const unsigned int tdmb_din1_pins[] = {GPIOA_11}; +static const unsigned int tdmb_dout1_pins[] = {GPIOA_11}; +static const unsigned int tdmb_din2_pins[] = {GPIOA_12}; +static const unsigned int tdmb_dout2_pins[] = {GPIOA_12}; +static const unsigned int tdmb_din3_pins[] = {GPIOA_13}; +static const unsigned int tdmb_dout3_pins[] = {GPIOA_13}; + +static struct meson_pmx_group meson_axg_periphs_groups[] = { + GPIO_GROUP(GPIOZ_0, EE_OFF), + GPIO_GROUP(GPIOZ_1, EE_OFF), + GPIO_GROUP(GPIOZ_2, EE_OFF), + GPIO_GROUP(GPIOZ_3, EE_OFF), + GPIO_GROUP(GPIOZ_4, EE_OFF), + GPIO_GROUP(GPIOZ_5, EE_OFF), + GPIO_GROUP(GPIOZ_6, EE_OFF), + GPIO_GROUP(GPIOZ_7, EE_OFF), + GPIO_GROUP(GPIOZ_8, EE_OFF), + GPIO_GROUP(GPIOZ_9, EE_OFF), + GPIO_GROUP(GPIOZ_10, EE_OFF), + + GPIO_GROUP(BOOT_0, EE_OFF), + GPIO_GROUP(BOOT_1, EE_OFF), + GPIO_GROUP(BOOT_2, EE_OFF), + GPIO_GROUP(BOOT_3, EE_OFF), + GPIO_GROUP(BOOT_4, EE_OFF), + GPIO_GROUP(BOOT_5, EE_OFF), + GPIO_GROUP(BOOT_6, EE_OFF), + GPIO_GROUP(BOOT_7, EE_OFF), + GPIO_GROUP(BOOT_8, EE_OFF), + GPIO_GROUP(BOOT_9, EE_OFF), + GPIO_GROUP(BOOT_10, EE_OFF), + GPIO_GROUP(BOOT_11, EE_OFF), + GPIO_GROUP(BOOT_12, EE_OFF), + GPIO_GROUP(BOOT_13, EE_OFF), + GPIO_GROUP(BOOT_14, EE_OFF), + + GPIO_GROUP(GPIOA_0, EE_OFF), + GPIO_GROUP(GPIOA_1, EE_OFF), + GPIO_GROUP(GPIOA_2, EE_OFF), + GPIO_GROUP(GPIOA_3, EE_OFF), + GPIO_GROUP(GPIOA_4, EE_OFF), + GPIO_GROUP(GPIOA_5, EE_OFF), + GPIO_GROUP(GPIOA_6, EE_OFF), + GPIO_GROUP(GPIOA_7, EE_OFF), + GPIO_GROUP(GPIOA_8, EE_OFF), + GPIO_GROUP(GPIOA_9, EE_OFF), + GPIO_GROUP(GPIOA_10, EE_OFF), + GPIO_GROUP(GPIOA_11, EE_OFF), + GPIO_GROUP(GPIOA_12, EE_OFF), + GPIO_GROUP(GPIOA_13, EE_OFF), + GPIO_GROUP(GPIOA_14, EE_OFF), + GPIO_GROUP(GPIOA_15, EE_OFF), + GPIO_GROUP(GPIOA_16, EE_OFF), + GPIO_GROUP(GPIOA_17, EE_OFF), + GPIO_GROUP(GPIOA_19, EE_OFF), + GPIO_GROUP(GPIOA_20, EE_OFF), + + GPIO_GROUP(GPIOX_0, EE_OFF), + GPIO_GROUP(GPIOX_1, EE_OFF), + GPIO_GROUP(GPIOX_2, EE_OFF), + GPIO_GROUP(GPIOX_3, EE_OFF), + GPIO_GROUP(GPIOX_4, EE_OFF), + GPIO_GROUP(GPIOX_5, EE_OFF), + GPIO_GROUP(GPIOX_6, EE_OFF), + GPIO_GROUP(GPIOX_7, EE_OFF), + GPIO_GROUP(GPIOX_8, EE_OFF), + GPIO_GROUP(GPIOX_9, EE_OFF), + GPIO_GROUP(GPIOX_10, EE_OFF), + GPIO_GROUP(GPIOX_11, EE_OFF), + GPIO_GROUP(GPIOX_12, EE_OFF), + GPIO_GROUP(GPIOX_13, EE_OFF), + GPIO_GROUP(GPIOX_14, EE_OFF), + GPIO_GROUP(GPIOX_15, EE_OFF), + GPIO_GROUP(GPIOX_16, EE_OFF), + GPIO_GROUP(GPIOX_17, EE_OFF), + GPIO_GROUP(GPIOX_18, EE_OFF), + GPIO_GROUP(GPIOX_19, EE_OFF), + GPIO_GROUP(GPIOX_20, EE_OFF), + GPIO_GROUP(GPIOX_21, EE_OFF), + GPIO_GROUP(GPIOX_22, EE_OFF), + + GPIO_GROUP(GPIOY_0, EE_OFF), + GPIO_GROUP(GPIOY_1, EE_OFF), + GPIO_GROUP(GPIOY_2, EE_OFF), + GPIO_GROUP(GPIOY_3, EE_OFF), + GPIO_GROUP(GPIOY_4, EE_OFF), + GPIO_GROUP(GPIOY_5, EE_OFF), + GPIO_GROUP(GPIOY_6, EE_OFF), + GPIO_GROUP(GPIOY_7, EE_OFF), + GPIO_GROUP(GPIOY_8, EE_OFF), + GPIO_GROUP(GPIOY_9, EE_OFF), + GPIO_GROUP(GPIOY_10, EE_OFF), + GPIO_GROUP(GPIOY_11, EE_OFF), + GPIO_GROUP(GPIOY_12, EE_OFF), + GPIO_GROUP(GPIOY_13, EE_OFF), + GPIO_GROUP(GPIOY_14, EE_OFF), + GPIO_GROUP(GPIOY_15, EE_OFF), + + /* bank BOOT */ + GROUP(emmc_nand_d0, 1), + GROUP(emmc_nand_d1, 1), + GROUP(emmc_nand_d2, 1), + GROUP(emmc_nand_d3, 1), + GROUP(emmc_nand_d4, 1), + GROUP(emmc_nand_d5, 1), + GROUP(emmc_nand_d6, 1), + GROUP(emmc_nand_d7, 1), + GROUP(emmc_clk, 1), + GROUP(emmc_cmd, 1), + GROUP(emmc_ds, 1), + GROUP(nand_ce0, 2), + GROUP(nand_ale, 2), + GROUP(nand_cle, 2), + GROUP(nand_wen_clk, 2), + GROUP(nand_ren_wr, 2), + GROUP(nand_rb0, 2), + GROUP(nor_hold, 3), + GROUP(nor_d, 3), + GROUP(nor_q, 3), + GROUP(nor_c, 3), + GROUP(nor_wp, 3), + GROUP(nor_cs, 3), + + /* bank GPIOZ */ + GROUP(spi0_clk, 1), + GROUP(spi0_mosi, 1), + GROUP(spi0_miso, 1), + GROUP(spi0_ss0, 1), + GROUP(spi0_ss1, 1), + GROUP(spi0_ss2, 1), + GROUP(i2c0_sck, 1), + GROUP(i2c0_sda, 1), + GROUP(i2c1_sck_z, 1), + GROUP(i2c1_sda_z, 1), + GROUP(uart_rts_b_z, 2), + GROUP(uart_cts_b_z, 2), + GROUP(uart_tx_b_z, 2), + GROUP(uart_rx_b_z, 2), + GROUP(pwm_a_z, 2), + GROUP(pwm_b_z, 2), + GROUP(spdif_in_z, 3), + GROUP(spdif_out_z, 3), + GROUP(uart_ao_tx_b_z, 2), + GROUP(uart_ao_rx_b_z, 2), + GROUP(uart_ao_cts_b_z, 2), + GROUP(uart_ao_rts_b_z, 2), + + /* bank GPIOX */ + GROUP(sdio_d0, 1), + GROUP(sdio_d1, 1), + GROUP(sdio_d2, 1), + GROUP(sdio_d3, 1), + GROUP(sdio_clk, 1), + GROUP(sdio_cmd, 1), + GROUP(i2c1_sck_x, 1), + GROUP(i2c1_sda_x, 1), + GROUP(i2c2_sck_x, 1), + GROUP(i2c2_sda_x, 1), + GROUP(uart_rts_a, 1), + GROUP(uart_cts_a, 1), + GROUP(uart_tx_a, 1), + GROUP(uart_rx_a, 1), + GROUP(uart_rts_b_x, 2), + GROUP(uart_cts_b_x, 2), + GROUP(uart_tx_b_x, 2), + GROUP(uart_rx_b_x, 2), + GROUP(jtag_tdo_x, 2), + GROUP(jtag_tdi_x, 2), + GROUP(jtag_clk_x, 2), + GROUP(jtag_tms_x, 2), + GROUP(spi1_clk_x, 4), + GROUP(spi1_mosi_x, 4), + GROUP(spi1_miso_x, 4), + GROUP(spi1_ss0_x, 4), + GROUP(pwm_a_x18, 3), + GROUP(pwm_a_x20, 1), + GROUP(pwm_b_x, 3), + GROUP(pwm_c_x10, 3), + GROUP(pwm_c_x17, 3), + GROUP(pwm_d_x11, 3), + GROUP(pwm_d_x16, 3), + GROUP(eth_txd0_x, 4), + GROUP(eth_txd1_x, 4), + GROUP(eth_txen_x, 4), + GROUP(eth_rgmii_rx_clk_x, 4), + GROUP(eth_rxd0_x, 4), + GROUP(eth_rxd1_x, 4), + GROUP(eth_rx_dv_x, 4), + GROUP(eth_mdio_x, 4), + GROUP(eth_mdc_x, 4), + GROUP(tdma_sclk, 1), + GROUP(tdma_sclk_slv, 2), + GROUP(tdma_fs, 1), + GROUP(tdma_fs_slv, 2), + GROUP(tdma_din0, 1), + GROUP(tdma_dout0_x14, 2), + GROUP(tdma_dout0_x15, 1), + GROUP(tdma_dout1, 2), + GROUP(tdma_din1, 3), + + /* bank GPIOY */ + GROUP(eth_txd0_y, 1), + GROUP(eth_txd1_y, 1), + GROUP(eth_txen_y, 1), + GROUP(eth_rgmii_rx_clk_y, 1), + GROUP(eth_rxd0_y, 1), + GROUP(eth_rxd1_y, 1), + GROUP(eth_rx_dv_y, 1), + GROUP(eth_mdio_y, 1), + GROUP(eth_mdc_y, 1), + GROUP(eth_rxd2_rgmii, 1), + GROUP(eth_rxd3_rgmii, 1), + GROUP(eth_rgmii_tx_clk, 1), + GROUP(eth_txd2_rgmii, 1), + GROUP(eth_txd3_rgmii, 1), + + /* bank GPIOA */ + GROUP(spdif_out_a1, 4), + GROUP(spdif_out_a11, 3), + GROUP(spdif_out_a19, 2), + GROUP(spdif_out_a20, 1), + GROUP(spdif_in_a1, 3), + GROUP(spdif_in_a7, 3), + GROUP(spdif_in_a19, 1), + GROUP(spdif_in_a20, 2), + GROUP(spi1_clk_a, 3), + GROUP(spi1_mosi_a, 3), + GROUP(spi1_miso_a, 3), + GROUP(spi1_ss0_a, 3), + GROUP(spi1_ss1, 3), + GROUP(pwm_a_a, 3), + GROUP(pwm_b_a, 3), + GROUP(pwm_c_a, 3), + GROUP(pwm_vs, 2), + GROUP(i2c2_sda_a, 3), + GROUP(i2c2_sck_a, 3), + GROUP(i2c3_sda_a6, 4), + GROUP(i2c3_sck_a7, 4), + GROUP(i2c3_sda_a12, 4), + GROUP(i2c3_sck_a13, 4), + GROUP(i2c3_sda_a19, 4), + GROUP(i2c3_sck_a20, 4), + GROUP(pdm_dclk_a14, 1), + GROUP(pdm_dclk_a19, 3), + GROUP(pdm_din0, 1), + GROUP(pdm_din1, 1), + GROUP(pdm_din2, 1), + GROUP(pdm_din3, 1), + GROUP(mclk_c, 1), + GROUP(mclk_b, 1), + GROUP(tdmc_sclk, 1), + GROUP(tdmc_sclk_slv, 2), + GROUP(tdmc_fs, 1), + GROUP(tdmc_fs_slv, 2), + GROUP(tdmc_din0, 2), + GROUP(tdmc_dout0, 1), + GROUP(tdmc_din1, 2), + GROUP(tdmc_dout1, 1), + GROUP(tdmc_din2, 2), + GROUP(tdmc_dout2, 1), + GROUP(tdmc_din3, 2), + GROUP(tdmc_dout3, 1), + GROUP(tdmb_sclk, 1), + GROUP(tdmb_sclk_slv, 2), + GROUP(tdmb_fs, 1), + GROUP(tdmb_fs_slv, 2), + GROUP(tdmb_din0, 2), + GROUP(tdmb_dout0, 1), + GROUP(tdmb_din1, 2), + GROUP(tdmb_dout1, 1), + GROUP(tdmb_din2, 2), + GROUP(tdmb_dout2, 1), + GROUP(tdmb_din3, 2), + GROUP(tdmb_dout3, 1), +}; + +/* uart_ao_a */ +static const unsigned int uart_ao_tx_a_pins[] = {GPIOAO_0}; +static const unsigned int uart_ao_rx_a_pins[] = {GPIOAO_1}; +static const unsigned int uart_ao_cts_a_pins[] = {GPIOAO_2}; +static const unsigned int uart_ao_rts_a_pins[] = {GPIOAO_3}; + +/* uart_ao_b */ +static const unsigned int uart_ao_tx_b_pins[] = {GPIOAO_4}; +static const unsigned int uart_ao_rx_b_pins[] = {GPIOAO_5}; +static const unsigned int uart_ao_cts_b_pins[] = {GPIOAO_2}; +static const unsigned int uart_ao_rts_b_pins[] = {GPIOAO_3}; + +/* i2c_ao */ +static const unsigned int i2c_ao_sck_4_pins[] = {GPIOAO_4}; +static const unsigned int i2c_ao_sda_5_pins[] = {GPIOAO_5}; +static const unsigned int i2c_ao_sck_8_pins[] = {GPIOAO_8}; +static const unsigned int i2c_ao_sda_9_pins[] = {GPIOAO_9}; +static const unsigned int i2c_ao_sck_10_pins[] = {GPIOAO_10}; +static const unsigned int i2c_ao_sda_11_pins[] = {GPIOAO_11}; + +/* i2c_ao_slave */ +static const unsigned int i2c_ao_slave_sck_pins[] = {GPIOAO_10}; +static const unsigned int i2c_ao_slave_sda_pins[] = {GPIOAO_11}; + +/* ir_in */ +static const unsigned int remote_input_ao_pins[] = {GPIOAO_6}; + +/* ir_out */ +static const unsigned int remote_out_ao_pins[] = {GPIOAO_7}; + +/* pwm_ao_a */ +static const unsigned int pwm_ao_a_pins[] = {GPIOAO_3}; + +/* pwm_ao_b */ +static const unsigned int pwm_ao_b_ao2_pins[] = {GPIOAO_2}; +static const unsigned int pwm_ao_b_ao12_pins[] = {GPIOAO_12}; + +/* pwm_ao_c */ +static const unsigned int pwm_ao_c_ao8_pins[] = {GPIOAO_8}; +static const unsigned int pwm_ao_c_ao13_pins[] = {GPIOAO_13}; + +/* pwm_ao_d */ +static const unsigned int pwm_ao_d_pins[] = {GPIOAO_9}; + +/* jtag_ao */ +static const unsigned int jtag_ao_tdi_pins[] = {GPIOAO_3}; +static const unsigned int jtag_ao_tdo_pins[] = {GPIOAO_4}; +static const unsigned int jtag_ao_clk_pins[] = {GPIOAO_5}; +static const unsigned int jtag_ao_tms_pins[] = {GPIOAO_7}; + +static struct meson_pmx_group meson_axg_aobus_groups[] = { + GPIO_GROUP(GPIOAO_0, 0), + GPIO_GROUP(GPIOAO_1, 0), + GPIO_GROUP(GPIOAO_2, 0), + GPIO_GROUP(GPIOAO_3, 0), + GPIO_GROUP(GPIOAO_4, 0), + GPIO_GROUP(GPIOAO_5, 0), + GPIO_GROUP(GPIOAO_6, 0), + GPIO_GROUP(GPIOAO_7, 0), + GPIO_GROUP(GPIOAO_8, 0), + GPIO_GROUP(GPIOAO_9, 0), + GPIO_GROUP(GPIOAO_10, 0), + GPIO_GROUP(GPIOAO_11, 0), + GPIO_GROUP(GPIOAO_12, 0), + GPIO_GROUP(GPIOAO_13, 0), + GPIO_GROUP(GPIO_TEST_N, 0), + + /* bank AO */ + GROUP(uart_ao_tx_a, 1), + GROUP(uart_ao_rx_a, 1), + GROUP(uart_ao_cts_a, 2), + GROUP(uart_ao_rts_a, 2), + GROUP(uart_ao_tx_b, 1), + GROUP(uart_ao_rx_b, 1), + GROUP(uart_ao_cts_b, 1), + GROUP(uart_ao_rts_b, 1), + GROUP(i2c_ao_sck_4, 2), + GROUP(i2c_ao_sda_5, 2), + GROUP(i2c_ao_sck_8, 2), + GROUP(i2c_ao_sda_9, 2), + GROUP(i2c_ao_sck_10, 2), + GROUP(i2c_ao_sda_11, 2), + GROUP(i2c_ao_slave_sck, 1), + GROUP(i2c_ao_slave_sda, 1), + GROUP(remote_input_ao, 1), + GROUP(remote_out_ao, 1), + GROUP(pwm_ao_a, 3), + GROUP(pwm_ao_b_ao2, 3), + GROUP(pwm_ao_b_ao12, 3), + GROUP(pwm_ao_c_ao8, 3), + GROUP(pwm_ao_c_ao13, 3), + GROUP(pwm_ao_d, 3), + GROUP(jtag_ao_tdi, 4), + GROUP(jtag_ao_tdo, 4), + GROUP(jtag_ao_clk, 4), + GROUP(jtag_ao_tms, 4), +}; + +static const char * const gpio_periphs_groups[] = { + "GPIOZ_0", "GPIOZ_1", "GPIOZ_2", "GPIOZ_3", "GPIOZ_4", + "GPIOZ_5", "GPIOZ_6", "GPIOZ_7", "GPIOZ_8", "GPIOZ_9", + "GPIOZ_10", + + "BOOT_0", "BOOT_1", "BOOT_2", "BOOT_3", "BOOT_4", + "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9", + "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14", + + "GPIOA_0", "GPIOA_1", "GPIOA_2", "GPIOA_3", "GPIOA_4", + "GPIOA_5", "GPIOA_6", "GPIOA_7", "GPIOA_8", "GPIOA_9", + "GPIOA_10", "GPIOA_11", "GPIOA_12", "GPIOA_13", "GPIOA_14", + "GPIOA_15", "GPIOA_16", "GPIOA_17", "GPIOA_18", "GPIOA_19", + "GPIOA_20", + + "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", + "GPIOX_5", "GPIOX_6", "GPIOX_7", "GPIOX_8", "GPIOX_9", + "GPIOX_10", "GPIOX_11", "GPIOX_12", "GPIOX_13", "GPIOX_14", + "GPIOX_15", "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19", + "GPIOX_20", "GPIOX_21", "GPIOX_22", + + "GPIOY_0", "GPIOY_1", "GPIOY_2", "GPIOY_3", "GPIOY_4", + "GPIOY_5", "GPIOY_6", "GPIOY_7", "GPIOY_8", "GPIOY_9", + "GPIOY_10", "GPIOY_11", "GPIOY_12", "GPIOY_13", "GPIOY_14", + "GPIOY_15", +}; + +static const char * const emmc_groups[] = { + "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", + "emmc_nand_d3", "emmc_nand_d4", "emmc_nand_d5", + "emmc_nand_d6", "emmc_nand_d7", + "emmc_clk", "emmc_cmd", "emmc_ds", +}; + +static const char * const nand_groups[] = { + "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", + "emmc_nand_d3", "emmc_nand_d4", "emmc_nand_d5", + "emmc_nand_d6", "emmc_nand_d7", + "nand_ce0", "nand_ale", "nand_cle", + "nand_wen_clk", "nand_ren_wr", "nand_rb0", +}; + +static const char * const nor_groups[] = { + "nor_d", "nor_q", "nor_c", "nor_cs", + "nor_hold", "nor_wp", +}; + +static const char * const sdio_groups[] = { + "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", + "sdio_cmd", "sdio_clk", +}; + +static const char * const spi0_groups[] = { + "spi0_clk", "spi0_mosi", "spi0_miso", "spi0_ss0", + "spi0_ss1", "spi0_ss2" +}; + +static const char * const spi1_groups[] = { + "spi1_clk_x", "spi1_mosi_x", "spi1_miso_x", "spi1_ss0_x", + "spi1_clk_a", "spi1_mosi_a", "spi1_miso_a", "spi1_ss0_a", + "spi1_ss1" +}; + +static const char * const uart_a_groups[] = { + "uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a", +}; + +static const char * const uart_b_groups[] = { + "uart_tx_b_z", "uart_rx_b_z", "uart_cts_b_z", "uart_rts_b_z", + "uart_tx_b_x", "uart_rx_b_x", "uart_cts_b_x", "uart_rts_b_x", +}; + +static const char * const uart_ao_b_z_groups[] = { + "uart_ao_tx_b_z", "uart_ao_rx_b_z", + "uart_ao_cts_b_z", "uart_ao_rts_b_z", +}; + +static const char * const i2c0_groups[] = { + "i2c0_sck", "i2c0_sda", +}; + +static const char * const i2c1_groups[] = { + "i2c1_sck_z", "i2c1_sda_z", + "i2c1_sck_x", "i2c1_sda_x", +}; + +static const char * const i2c2_groups[] = { + "i2c2_sck_x", "i2c2_sda_x", + "i2c2_sda_a", "i2c2_sck_a", +}; + +static const char * const i2c3_groups[] = { + "i2c3_sda_a6", "i2c3_sck_a7", + "i2c3_sda_a12", "i2c3_sck_a13", + "i2c3_sda_a19", "i2c3_sck_a20", +}; + +static const char * const eth_groups[] = { + "eth_rxd2_rgmii", "eth_rxd3_rgmii", "eth_rgmii_tx_clk", + "eth_txd2_rgmii", "eth_txd3_rgmii", + "eth_txd0_x", "eth_txd1_x", "eth_txen_x", "eth_rgmii_rx_clk_x", + "eth_rxd0_x", "eth_rxd1_x", "eth_rx_dv_x", "eth_mdio_x", + "eth_mdc_x", + "eth_txd0_y", "eth_txd1_y", "eth_txen_y", "eth_rgmii_rx_clk_y", + "eth_rxd0_y", "eth_rxd1_y", "eth_rx_dv_y", "eth_mdio_y", + "eth_mdc_y", +}; + +static const char * const pwm_a_groups[] = { + "pwm_a_z", "pwm_a_x18", "pwm_a_x20", "pwm_a_a", +}; + +static const char * const pwm_b_groups[] = { + "pwm_b_z", "pwm_b_x", "pwm_b_a", +}; + +static const char * const pwm_c_groups[] = { + "pwm_c_x10", "pwm_c_x17", "pwm_c_a", +}; + +static const char * const pwm_d_groups[] = { + "pwm_d_x11", "pwm_d_x16", +}; + +static const char * const pwm_vs_groups[] = { + "pwm_vs", +}; + +static const char * const spdif_out_groups[] = { + "spdif_out_z", "spdif_out_a1", "spdif_out_a11", + "spdif_out_a19", "spdif_out_a20", +}; + +static const char * const spdif_in_groups[] = { + "spdif_in_z", "spdif_in_a1", "spdif_in_a7", + "spdif_in_a19", "spdif_in_a20", +}; + +static const char * const jtag_ee_groups[] = { + "jtag_tdo_x", "jtag_tdi_x", "jtag_clk_x", + "jtag_tms_x", +}; + +static const char * const pdm_groups[] = { + "pdm_din0", "pdm_din1", "pdm_din2", "pdm_din3", + "pdm_dclk_a14", "pdm_dclk_a19", +}; + +static const char * const gpio_aobus_groups[] = { + "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4", + "GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9", + "GPIOAO_10", "GPIOAO_11", "GPIOAO_12", "GPIOAO_13", + "GPIO_TEST_N", +}; + +static const char * const uart_ao_a_groups[] = { + "uart_ao_tx_a", "uart_ao_rx_a", "uart_ao_cts_a", "uart_ao_rts_a", +}; + +static const char * const uart_ao_b_groups[] = { + "uart_ao_tx_b", "uart_ao_rx_b", "uart_ao_cts_b", "uart_ao_rts_b", +}; + +static const char * const i2c_ao_groups[] = { + "i2c_ao_sck_4", "i2c_ao_sda_5", + "i2c_ao_sck_8", "i2c_ao_sda_9", + "i2c_ao_sck_10", "i2c_ao_sda_11", +}; + +static const char * const i2c_ao_slave_groups[] = { + "i2c_ao_slave_sck", "i2c_ao_slave_sda", +}; + +static const char * const remote_input_ao_groups[] = { + "remote_input_ao", +}; + +static const char * const remote_out_ao_groups[] = { + "remote_out_ao", +}; + +static const char * const pwm_ao_a_groups[] = { + "pwm_ao_a", +}; + +static const char * const pwm_ao_b_groups[] = { + "pwm_ao_b_ao2", "pwm_ao_b_ao12", +}; + +static const char * const pwm_ao_c_groups[] = { + "pwm_ao_c_ao8", "pwm_ao_c_ao13", +}; + +static const char * const pwm_ao_d_groups[] = { + "pwm_ao_d", +}; + +static const char * const jtag_ao_groups[] = { + "jtag_ao_tdi", "jtag_ao_tdo", "jtag_ao_clk", "jtag_ao_tms", +}; + +static const char * const mclk_c_groups[] = { + "mclk_c", +}; + +static const char * const mclk_b_groups[] = { + "mclk_b", +}; + +static const char * const tdma_groups[] = { + "tdma_sclk", "tdma_sclk_slv", "tdma_fs", "tdma_fs_slv", + "tdma_din0", "tdma_dout0_x14", "tdma_dout0_x15", "tdma_dout1", + "tdma_din1", +}; + +static const char * const tdmc_groups[] = { + "tdmc_sclk", "tdmc_sclk_slv", "tdmc_fs", "tdmc_fs_slv", + "tdmc_din0", "tdmc_dout0", "tdmc_din1", "tdmc_dout1", + "tdmc_din2", "tdmc_dout2", "tdmc_din3", "tdmc_dout3", +}; + +static const char * const tdmb_groups[] = { + "tdmb_sclk", "tdmb_sclk_slv", "tdmb_fs", "tdmb_fs_slv", + "tdmb_din0", "tdmb_dout0", "tdmb_din1", "tdmb_dout1", + "tdmb_din2", "tdmb_dout2", "tdmb_din3", "tdmb_dout3", +}; + +static struct meson_pmx_func meson_axg_periphs_functions[] = { + FUNCTION(gpio_periphs), + FUNCTION(emmc), + FUNCTION(nor), + FUNCTION(spi0), + FUNCTION(spi1), + FUNCTION(sdio), + FUNCTION(nand), + FUNCTION(uart_a), + FUNCTION(uart_b), + FUNCTION(uart_ao_b_z), + FUNCTION(i2c0), + FUNCTION(i2c1), + FUNCTION(i2c2), + FUNCTION(i2c3), + FUNCTION(eth), + FUNCTION(pwm_a), + FUNCTION(pwm_b), + FUNCTION(pwm_c), + FUNCTION(pwm_d), + FUNCTION(pwm_vs), + FUNCTION(spdif_out), + FUNCTION(spdif_in), + FUNCTION(jtag_ee), + FUNCTION(pdm), + FUNCTION(mclk_b), + FUNCTION(mclk_c), + FUNCTION(tdma), + FUNCTION(tdmb), + FUNCTION(tdmc), +}; + +static struct meson_pmx_func meson_axg_aobus_functions[] = { + FUNCTION(gpio_aobus), + FUNCTION(uart_ao_a), + FUNCTION(uart_ao_b), + FUNCTION(i2c_ao), + FUNCTION(i2c_ao_slave), + FUNCTION(remote_input_ao), + FUNCTION(remote_out_ao), + FUNCTION(pwm_ao_a), + FUNCTION(pwm_ao_b), + FUNCTION(pwm_ao_c), + FUNCTION(pwm_ao_d), + FUNCTION(jtag_ao), +}; + +static struct meson_bank meson_axg_periphs_banks[] = { + /* name first last pullen pull dir out in */ + BANK("Z", GPIOZ_0, GPIOZ_10, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0), + BANK("BOOT", BOOT_0, BOOT_14, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0), + BANK("A", GPIOA_0, GPIOA_20, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0), + BANK("X", GPIOX_0, GPIOX_22, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0), + BANK("Y", GPIOY_0, GPIOY_15, 1, 0, 1, 0, 3, 0, 4, 0, 5, 0), +}; + +static struct meson_bank meson_axg_aobus_banks[] = { + /* name first last pullen pull dir out in */ + BANK("AO", GPIOAO_0, GPIOAO_13, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), +}; + +static struct meson_pmx_bank meson_axg_periphs_pmx_banks[] = { + /* name first lask reg offset */ + BANK_PMX("Z", GPIOZ_0, GPIOZ_10, 0x2, 0), + BANK_PMX("BOOT", BOOT_0, BOOT_14, 0x0, 0), + BANK_PMX("A", GPIOA_0, GPIOA_20, 0xb, 0), + BANK_PMX("X", GPIOX_0, GPIOX_22, 0x4, 0), + BANK_PMX("Y", GPIOY_0, GPIOY_15, 0x8, 0), +}; + +static struct meson_axg_pmx_data meson_axg_periphs_pmx_banks_data = { + .pmx_banks = meson_axg_periphs_pmx_banks, + .num_pmx_banks = ARRAY_SIZE(meson_axg_periphs_pmx_banks), +}; + +static struct meson_pmx_bank meson_axg_aobus_pmx_banks[] = { + BANK_PMX("AO", GPIOAO_0, GPIOAO_13, 0x0, 0), +}; + +static struct meson_axg_pmx_data meson_axg_aobus_pmx_banks_data = { + .pmx_banks = meson_axg_aobus_pmx_banks, + .num_pmx_banks = ARRAY_SIZE(meson_axg_aobus_pmx_banks), +}; + +struct meson_pinctrl_data meson_axg_periphs_pinctrl_data = { + .name = "periphs-banks", + .pin_base = 11, + .groups = meson_axg_periphs_groups, + .funcs = meson_axg_periphs_functions, + .banks = meson_axg_periphs_banks, + .num_pins = 100, + .num_groups = ARRAY_SIZE(meson_axg_periphs_groups), + .num_funcs = ARRAY_SIZE(meson_axg_periphs_functions), + .num_banks = ARRAY_SIZE(meson_axg_periphs_banks), + .gpio_driver = &meson_axg_gpio_driver, + .pmx_data = &meson_axg_periphs_pmx_banks_data, +}; + +struct meson_pinctrl_data meson_axg_aobus_pinctrl_data = { + .name = "aobus-banks", + .pin_base = 0, + .groups = meson_axg_aobus_groups, + .funcs = meson_axg_aobus_functions, + .banks = meson_axg_aobus_banks, + .num_pins = 11, + .num_groups = ARRAY_SIZE(meson_axg_aobus_groups), + .num_funcs = ARRAY_SIZE(meson_axg_aobus_functions), + .num_banks = ARRAY_SIZE(meson_axg_aobus_banks), + .gpio_driver = &meson_axg_gpio_driver, + .pmx_data = &meson_axg_aobus_pmx_banks_data, +}; + +static const struct udevice_id meson_axg_pinctrl_match[] = { + { + .compatible = "amlogic,meson-axg-periphs-pinctrl", + .data = (ulong)&meson_axg_periphs_pinctrl_data, + }, + { + .compatible = "amlogic,meson-axg-aobus-pinctrl", + .data = (ulong)&meson_axg_aobus_pinctrl_data, + }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(meson_axg_pinctrl) = { + .name = "meson-axg-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(meson_axg_pinctrl_match), + .probe = meson_pinctrl_probe, + .priv_auto_alloc_size = sizeof(struct meson_pinctrl), + .ops = &meson_axg_pinctrl_ops, +}; diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.h b/drivers/pinctrl/meson/pinctrl-meson-axg.h new file mode 100644 index 0000000..c8d2b3a --- /dev/null +++ b/drivers/pinctrl/meson/pinctrl-meson-axg.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017 Jerome Brunet jbrunet@baylibre.com + * Copyright (C) 2017 Xingyu Chen xingyu.chen@amlogic.com + */ + +#ifndef __PINCTRL_MESON_AXG_H__ +#define __PINCTRL_MESON_AXG_H__ + +#include "pinctrl-meson.h" + +struct meson_pmx_bank { + const char *name; + unsigned int first; + unsigned int last; + unsigned int reg; + unsigned int offset; +}; + +struct meson_axg_pmx_data { + struct meson_pmx_bank *pmx_banks; + unsigned int num_pmx_banks; +}; + +#define BANK_PMX(n, f, l, r, o) \ + { \ + .name = n, \ + .first = f, \ + .last = l, \ + .reg = r, \ + .offset = o, \ + } + +struct meson_pmx_axg_data { + unsigned int func; +}; + +#define PMX_DATA(f) \ + { \ + .func = f, \ + } + +#define GROUP(grp, f) \ + { \ + .name = #grp, \ + .pins = grp ## _pins, \ + .num_pins = ARRAY_SIZE(grp ## _pins), \ + .data = (const struct meson_pmx_axg_data[]){ \ + PMX_DATA(f), \ + }, \ + } + +#define GPIO_GROUP(gpio, b) \ + { \ + .name = #gpio, \ + .pins = (const unsigned int[]){ PIN(gpio, b) }, \ + .num_pins = 1, \ + .data = (const struct meson_pmx_axg_data[]){ \ + PMX_DATA(0), \ + }, \ + } + +extern const struct pinctrl_ops meson_axg_pinctrl_ops; +extern const struct driver meson_axg_gpio_driver; + +#endif /* __PINCTRL_MESON_AXG_H__ */

The meson_gates table should be set static in the clk_meson driver.

Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- drivers/clk/clk_meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c index 236d734..509872b 100644 --- a/drivers/clk/clk_meson.c +++ b/drivers/clk/clk_meson.c @@ -79,7 +79,7 @@ static ulong meson_clk_set_rate_by_id(struct clk *clk, unsigned long id, static ulong meson_mux_get_parent(struct clk *clk, unsigned long id); static ulong meson_clk_get_rate_by_id(struct clk *clk, unsigned long id);

-struct meson_gate gates[] = { +static struct meson_gate gates[] = { /* Everything Else (EE) domain gates */ MESON_GATE(CLKID_DDR, HHI_GCLK_MPEG0, 0), MESON_GATE(CLKID_DOS, HHI_GCLK_MPEG0, 1),

From: Jerome Brunet jbrunet@baylibre.com

We are about to add support for the Amlogic AXG SoC. While very close to the Gx SoC family, we will need to handle a few thing which are different in this SoC. Rework the meson arch directory to prepare for this.

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/include/asm/arch-meson/clock-gx.h | 117 +++++++++++++++++++++++++ arch/arm/include/asm/arch-meson/clock.h | 117 ------------------------- arch/arm/include/asm/arch-meson/eth.h | 6 +- arch/arm/include/asm/arch-meson/mem.h | 3 +- arch/arm/mach-meson/Kconfig | 10 ++- arch/arm/mach-meson/Makefile | 3 +- arch/arm/mach-meson/board-common.c | 56 ++++++++++++ arch/arm/mach-meson/board-gx.c | 132 +++++++++++++++++++++++++++++ arch/arm/mach-meson/board.c | 130 ---------------------------- arch/arm/mach-meson/eth.c | 53 ------------ arch/arm/mach-meson/sm.c | 1 - board/amlogic/odroid-c2/odroid-c2.c | 6 +- board/amlogic/p212/p212.c | 6 +- board/amlogic/q200/q200.c | 4 +- drivers/clk/clk_meson.c | 2 +- 15 files changed, 328 insertions(+), 318 deletions(-) create mode 100644 arch/arm/include/asm/arch-meson/clock-gx.h delete mode 100644 arch/arm/include/asm/arch-meson/clock.h create mode 100644 arch/arm/mach-meson/board-common.c create mode 100644 arch/arm/mach-meson/board-gx.c delete mode 100644 arch/arm/mach-meson/board.c delete mode 100644 arch/arm/mach-meson/eth.c

diff --git a/arch/arm/include/asm/arch-meson/clock-gx.h b/arch/arm/include/asm/arch-meson/clock-gx.h new file mode 100644 index 0000000..13a2e76 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/clock-gx.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2016 - AmLogic, Inc. + * Copyright 2018 - Beniamino Galvani b.galvani@gmail.com + */ +#ifndef _ARCH_MESON_CLOCK_GX_H_ +#define _ARCH_MESON_CLOCK_GX_H_ + +/* + * Clock controller register offsets + * + * Register offsets from the data sheet are listed in comment blocks below. + * Those offsets must be multiplied by 4 before adding them to the base address + * to get the right value + */ +#define SCR 0x2C /* 0x0b offset in data sheet */ +#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */ + +#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ +#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ +#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ +#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */ +#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ +#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */ + +#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */ +#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */ + +#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */ +#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */ +#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */ +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */ +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */ + +#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */ +#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */ +#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */ +#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */ +#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */ +#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */ +#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */ +#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */ +#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */ + +#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */ +#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */ +#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */ +#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */ +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */ +#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */ +#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */ +#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */ +#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */ +#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */ + +#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */ +#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */ +#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */ +#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */ +#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */ +#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */ +#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */ + +#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */ +#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */ +#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */ +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ + +#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */ +#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */ +#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */ + +#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */ +#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */ +#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */ +#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */ +#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */ +#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */ +#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */ +#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */ +#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */ +#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */ + +#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */ +#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */ +#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ +#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ + +#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */ +#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */ +#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */ +#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */ +#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */ +#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */ +#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */ +#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */ +#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */ +#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */ +#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */ +#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */ + +#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */ +#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */ +#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */ +#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */ + +#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */ +#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */ +#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */ + +ulong meson_measure_clk_rate(unsigned int clk); + +#endif diff --git a/arch/arm/include/asm/arch-meson/clock.h b/arch/arm/include/asm/arch-meson/clock.h deleted file mode 100644 index c0ff00f..0000000 --- a/arch/arm/include/asm/arch-meson/clock.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2016 - AmLogic, Inc. - * Copyright 2018 - Beniamino Galvani b.galvani@gmail.com - */ -#ifndef _ARCH_MESON_CLOCK_H_ -#define _ARCH_MESON_CLOCK_H_ - -/* - * Clock controller register offsets - * - * Register offsets from the data sheet are listed in comment blocks below. - * Those offsets must be multiplied by 4 before adding them to the base address - * to get the right value - */ -#define SCR 0x2C /* 0x0b offset in data sheet */ -#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */ - -#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ -#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ -#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ -#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */ -#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ -#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */ - -#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */ -#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */ - -#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */ -#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */ -#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */ -#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */ -#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */ - -#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */ -#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */ -#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */ -#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */ -#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */ -#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */ -#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */ -#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */ -#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */ - -#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */ -#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */ -#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */ -#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */ -#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */ -#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */ -#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */ -#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */ -#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */ -#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */ - -#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */ -#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */ -#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */ -#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */ -#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */ -#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */ -#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */ - -#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */ -#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */ -#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */ -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ - -#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */ -#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */ -#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */ - -#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */ -#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */ -#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */ -#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */ -#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */ -#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */ -#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */ -#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */ -#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */ -#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */ - -#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */ -#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */ -#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ -#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ - -#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */ -#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */ -#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */ -#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */ -#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */ -#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */ -#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */ -#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */ -#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */ -#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */ -#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */ -#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */ - -#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */ -#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */ -#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */ -#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */ - -#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */ -#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */ -#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */ - -ulong meson_measure_clk_rate(unsigned int clk); - -#endif diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h index 1aa0872..08acc5c 100644 --- a/arch/arm/include/asm/arch-meson/eth.h +++ b/arch/arm/include/asm/arch-meson/eth.h @@ -10,13 +10,13 @@ #include <phy.h>

enum { - /* Use GXL Internal RMII PHY */ - MESON_GXL_USE_INTERNAL_RMII_PHY = 1, + /* Use Internal RMII PHY */ + MESON_USE_INTERNAL_RMII_PHY = 1, };

/* Configure the Ethernet MAC with the requested interface mode * with some optional flags. */ -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags); +void meson_eth_init(phy_interface_t mode, unsigned int flags);

#endif /* __MESON_ETH_H__ */ diff --git a/arch/arm/include/asm/arch-meson/mem.h b/arch/arm/include/asm/arch-meson/mem.h index 6281833..a65100a 100644 --- a/arch/arm/include/asm/arch-meson/mem.h +++ b/arch/arm/include/asm/arch-meson/mem.h @@ -10,6 +10,7 @@ /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ -void meson_gx_init_reserved_memory(void *fdt); +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size); +void meson_init_reserved_memory(void *fdt);

#endif /* __MESON_MEM_H__ */ diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 6f60167..6225417 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -8,25 +8,29 @@ config MESON64_COMMON select DM_SERIAL imply CMD_DM

+config MESON_GX + bool + select MESON64_COMMON + choice prompt "Platform select" default MESON_GXBB

config MESON_GXBB bool "GXBB" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S905

config MESON_GXL bool "GXL" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S905X/D or S805X

config MESON_GXM bool "GXM" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S912

diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile index 8ad9b3e..78345b4 100644 --- a/arch/arm/mach-meson/Makefile +++ b/arch/arm/mach-meson/Makefile @@ -2,4 +2,5 @@ # # Copyright (c) 2016 Beniamino Galvani b.galvani@gmail.com

-obj-y += board.o sm.o eth.o +obj-y += board-common.o sm.o +obj-$(CONFIG_MESON_GX) += board-gx.o diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c new file mode 100644 index 0000000..0446507 --- /dev/null +++ b/arch/arm/mach-meson/board-common.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com + */ + +#include <common.h> +#include <linux/libfdt.h> +#include <linux/err.h> +#include <asm/arch/mem.h> +#include <asm/arch/sm.h> +#include <asm/armv8/mmu.h> +#include <asm/unaligned.h> +#include <efi_loader.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + const fdt64_t *val; + int offset; + int len; + + offset = fdt_path_offset(gd->fdt_blob, "/memory"); + if (offset < 0) + return -EINVAL; + + val = fdt_getprop(gd->fdt_blob, offset, "reg", &len); + if (len < sizeof(*val) * 2) + return -EINVAL; + + /* Use unaligned access since cache is still disabled */ + gd->ram_size = get_unaligned_be64(&val[1]); + + return 0; +} + +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) +{ + int ret; + + ret = fdt_add_mem_rsv(fdt, start, size); + if (ret) + printf("Could not reserve zone @ 0x%llx\n", start); + + if (IS_ENABLED(CONFIG_EFI_LOADER)) { + efi_add_memory_map(start, + ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, + EFI_RESERVED_MEMORY_TYPE, false); + } +} + +void reset_cpu(ulong addr) +{ + psci_system_reset(); +} + diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c new file mode 100644 index 0000000..f1397f8 --- /dev/null +++ b/arch/arm/mach-meson/board-gx.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com + * (C) Copyright 2018 Neil Armstrong narmstrong@baylibre.com + */ + +#include <common.h> +#include <asm/arch/eth.h> +#include <asm/arch/gx.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Configure the reserved memory zones exported by the secure registers + * into EFI and DTB reserved memory entries. + */ +void meson_init_reserved_memory(void *fdt) +{ + u64 bl31_size, bl31_start; + u64 bl32_size, bl32_start; + u32 reg; + + /* + * Get ARM Trusted Firmware reserved memory zones in : + * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0 + * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL + * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL + */ + reg = readl(GX_AO_SEC_GP_CFG3); + + bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK) + >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K; + bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K; + + bl31_start = readl(GX_AO_SEC_GP_CFG5); + bl32_start = readl(GX_AO_SEC_GP_CFG4); + + /* + * Early Meson GX Firmware revisions did not provide the reserved + * memory zones in the registers, keep fixed memory zone handling. + */ + if (IS_ENABLED(CONFIG_MESON_GX) && + !reg && !bl31_start && !bl32_start) { + bl31_start = 0x10000000; + bl31_size = 0x200000; + } + + /* Add first 16MiB reserved zone */ + meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE); + + /* Add BL31 reserved zone */ + if (bl31_start && bl31_size) + meson_board_add_reserved_memory(fdt, bl31_start, bl31_size); + + /* Add BL32 reserved zone */ + if (bl32_start && bl32_size) + meson_board_add_reserved_memory(fdt, bl32_start, bl32_size); +} + +phys_size_t get_effective_memsize(void) +{ + /* Size is reported in MiB, convert it in bytes */ + return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK) + >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M; +} + +static struct mm_region gx_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0xc0000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xc0000000UL, + .phys = 0xc0000000UL, + .size = 0x30000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = gx_mem_map; + +/* Configure the Ethernet MAC with the requested interface mode + * with some optional flags. + */ +void meson_eth_init(phy_interface_t mode, unsigned int flags) +{ + switch (mode) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + /* Set RGMII mode */ + setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF | + GX_ETH_REG_0_TX_PHASE(1) | + GX_ETH_REG_0_TX_RATIO(4) | + GX_ETH_REG_0_PHY_CLK_EN | + GX_ETH_REG_0_CLK_EN); + break; + + case PHY_INTERFACE_MODE_RMII: + /* Set RMII mode */ + out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK | + GX_ETH_REG_0_CLK_EN); + + /* Use GXL RMII Internal PHY */ + if (IS_ENABLED(CONFIG_MESON_GXL) && + (flags & MESON_USE_INTERNAL_RMII_PHY)) { + writel(0x10110181, GX_ETH_REG_2); + writel(0xe40908ff, GX_ETH_REG_3); + } + + break; + + default: + printf("Invalid Ethernet interface mode\n"); + return; + } + + /* Enable power gate */ + clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK); +} diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c deleted file mode 100644 index d6c6253..0000000 --- a/arch/arm/mach-meson/board.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com - */ - -#include <common.h> -#include <linux/libfdt.h> -#include <linux/err.h> -#include <asm/arch/gx.h> -#include <asm/arch/sm.h> -#include <asm/armv8/mmu.h> -#include <asm/unaligned.h> -#include <linux/sizes.h> -#include <efi_loader.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - const fdt64_t *val; - int offset; - int len; - - offset = fdt_path_offset(gd->fdt_blob, "/memory"); - if (offset < 0) - return -EINVAL; - - val = fdt_getprop(gd->fdt_blob, offset, "reg", &len); - if (len < sizeof(*val) * 2) - return -EINVAL; - - /* Use unaligned access since cache is still disabled */ - gd->ram_size = get_unaligned_be64(&val[1]); - - return 0; -} - -phys_size_t get_effective_memsize(void) -{ - /* Size is reported in MiB, convert it in bytes */ - return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK) - >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M; -} - -static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) -{ - int ret; - - ret = fdt_add_mem_rsv(fdt, start, size); - if (ret) - printf("Could not reserve zone @ 0x%llx\n", start); - - if (IS_ENABLED(CONFIG_EFI_LOADER)) { - efi_add_memory_map(start, - ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, - EFI_RESERVED_MEMORY_TYPE, false); - } -} - -void meson_gx_init_reserved_memory(void *fdt) -{ - u64 bl31_size, bl31_start; - u64 bl32_size, bl32_start; - u32 reg; - - /* - * Get ARM Trusted Firmware reserved memory zones in : - * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0 - * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL - * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL - */ - - reg = readl(GX_AO_SEC_GP_CFG3); - - bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK) - >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K; - bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K; - - bl31_start = readl(GX_AO_SEC_GP_CFG5); - bl32_start = readl(GX_AO_SEC_GP_CFG4); - - /* - * Early Meson GX Firmware revisions did not provide the reserved - * memory zones in the registers, keep fixed memory zone handling. - */ - if (IS_ENABLED(CONFIG_MESON_GX) && - !reg && !bl31_start && !bl32_start) { - bl31_start = 0x10000000; - bl31_size = 0x200000; - } - - /* Add first 16MiB reserved zone */ - meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE); - - /* Add BL31 reserved zone */ - if (bl31_start && bl31_size) - meson_board_add_reserved_memory(fdt, bl31_start, bl31_size); - - /* Add BL32 reserved zone */ - if (bl32_start && bl32_size) - meson_board_add_reserved_memory(fdt, bl32_start, bl32_size); -} - -void reset_cpu(ulong addr) -{ - psci_system_reset(); -} - -static struct mm_region gx_mem_map[] = { - { - .virt = 0x0UL, - .phys = 0x0UL, - .size = 0xc0000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { - .virt = 0xc0000000UL, - .phys = 0xc0000000UL, - .size = 0x30000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | - PTE_BLOCK_NON_SHARE | - PTE_BLOCK_PXN | PTE_BLOCK_UXN - }, { - /* List terminator */ - 0, - } -}; - -struct mm_region *mem_map = gx_mem_map; diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c deleted file mode 100644 index 8b28bc8..0000000 --- a/arch/arm/mach-meson/eth.c +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016 BayLibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#include <common.h> -#include <dm.h> -#include <asm/io.h> -#include <asm/arch/gx.h> -#include <asm/arch/eth.h> -#include <phy.h> - -/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags) -{ - switch (mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - /* Set RGMII mode */ - setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF | - GX_ETH_REG_0_TX_PHASE(1) | - GX_ETH_REG_0_TX_RATIO(4) | - GX_ETH_REG_0_PHY_CLK_EN | - GX_ETH_REG_0_CLK_EN); - break; - - case PHY_INTERFACE_MODE_RMII: - /* Set RMII mode */ - out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK | - GX_ETH_REG_0_CLK_EN); - - /* Use GXL RMII Internal PHY */ - if (IS_ENABLED(CONFIG_MESON_GXL) && - (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) { - writel(0x10110181, GX_ETH_REG_2); - writel(0xe40908ff, GX_ETH_REG_3); - } - - break; - - default: - printf("Invalid Ethernet interface mode\n"); - return; - } - - /* Enable power gate */ - clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK); -} diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c index 0bba5e4..a07b468 100644 --- a/arch/arm/mach-meson/sm.c +++ b/arch/arm/mach-meson/sm.c @@ -6,7 +6,6 @@ */

#include <common.h> -#include <asm/arch/gx.h> #include <linux/kernel.h>

#define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020 diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index 2a2755c..d784d6b 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -28,7 +28,7 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;

- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);

if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, @@ -40,7 +40,7 @@ int misc_init_r(void) if (!env_get("serial#")) { len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) + if (len == EFUSE_SN_SIZE) env_set("serial#", serial); }

@@ -49,7 +49,7 @@ int misc_init_r(void)

int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);

return 0; } diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c index 00e07d7..33992a2 100644 --- a/board/amlogic/p212/p212.c +++ b/board/amlogic/p212/p212.c @@ -29,8 +29,8 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;

- meson_gx_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_GXL_USE_INTERNAL_RMII_PHY); + meson_eth_init(PHY_INTERFACE_MODE_RMII, + MESON_USE_INTERNAL_RMII_PHY);

if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, @@ -51,7 +51,7 @@ int misc_init_r(void)

int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);

return 0; } diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index ff56569..b59c11b 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -29,7 +29,7 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;

- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);

/* Reset PHY on GPIOZ_14 */ clrbits_le32(GX_GPIO_EN(3), BIT(14)); @@ -56,7 +56,7 @@ int misc_init_r(void)

int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);

return 0; } diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c index 87e959e..978f646 100644 --- a/drivers/clk/clk_meson.c +++ b/drivers/clk/clk_meson.c @@ -6,7 +6,7 @@ */

#include <common.h> -#include <asm/arch/clock.h> +#include <asm/arch/clock-gx.h> #include <asm/io.h> #include <clk-uclass.h> #include <div64.h>

Synchronize the Amlogic AXG Device Tree files and bindings include from the recent Linux 4.20-rc1, because it includes patches fixing support for U-boot.

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-axg-s400.dts | 554 +++++++ arch/arm/dts/meson-axg.dtsi | 1589 ++++++++++++++++++++ include/dt-bindings/clock/axg-aoclkc.h | 26 + include/dt-bindings/clock/axg-audio-clkc.h | 94 ++ include/dt-bindings/clock/axg-clkc.h | 76 + include/dt-bindings/gpio/meson-axg-gpio.h | 116 ++ .../reset/amlogic,meson-axg-audio-arb.h | 17 + .../dt-bindings/reset/amlogic,meson-axg-reset.h | 124 ++ include/dt-bindings/reset/axg-aoclkc.h | 20 + 10 files changed, 2618 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-axg-s400.dts create mode 100644 arch/arm/dts/meson-axg.dtsi create mode 100644 include/dt-bindings/clock/axg-aoclkc.h create mode 100644 include/dt-bindings/clock/axg-audio-clkc.h create mode 100644 include/dt-bindings/clock/axg-clkc.h create mode 100644 include/dt-bindings/gpio/meson-axg-gpio.h create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-reset.h create mode 100644 include/dt-bindings/reset/axg-aoclkc.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d36447d..6667434 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -59,7 +59,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905x-p212.dtb \ meson-gxl-s905x-libretech-cc.dtb \ meson-gxl-s905x-khadas-vim.dtb \ - meson-gxm-khadas-vim2.dtb + meson-gxm-khadas-vim2.dtb \ + meson-axg-s400.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts new file mode 100644 index 0000000..18778ad --- /dev/null +++ b/arch/arm/dts/meson-axg-s400.dts @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> + +/ { + compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; + model = "Amlogic Meson AXG S400 Development Board"; + + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-next { + label = "Next"; + linux,code = <KEY_NEXT>; + press-threshold-microvolt = <1116000>; /* 62% */ + }; + + button-prev { + label = "Previous"; + linux,code = <KEY_PREVIOUS>; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-wifi { + label = "Wifi"; + linux,code = <KEY_WLAN>; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-voice { + label = "Voice"; + linux,code = <KEY_VOICECOMMAND>; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + }; + + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + dmics: audio-codec@3 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <7>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + speaker-leds { + compatible = "gpio-leds"; + + aled1 { + label = "speaker:aled1"; + gpios = <&gpio_speaker 7 0>; + }; + + aled2 { + label = "speaker:aled2"; + gpios = <&gpio_speaker 6 0>; + }; + + aled3 { + label = "speaker:aled3"; + gpios = <&gpio_speaker 5 0>; + }; + + aled4 { + label = "speaker:aled4"; + gpios = <&gpio_speaker 4 0>; + }; + + aled5 { + label = "speaker:aled5"; + gpios = <&gpio_speaker 3 0>; + }; + + aled6 { + label = "speaker:aled6"; + gpios = <&gpio_speaker 2 0>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "AXG-S400"; + audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "SPDIFOUT IN 2", "FRDDR_C OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TDMIN_LB IN 5", "TDM_C Capture", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker1 Left", "SPK1 OUT_B", + "Speaker1 Right", "SPK1 OUT_C", + "Speaker1 Right", "SPK1 OUT_D", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <589824000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link@0 { + sound-dai = <&frddr_a>; + }; + + dai-link@1 { + sound-dai = <&frddr_b>; + }; + + dai-link@2 { + sound-dai = <&frddr_c>; + }; + + dai-link@3 { + sound-dai = <&toddr_a>; + }; + + dai-link@4 { + sound-dai = <&toddr_b>; + }; + + dai-link@5 { + sound-dai = <&toddr_c>; + }; + + dai-link@6 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&lineout>; + }; + + codec@1 { + sound-dai = <&speaker_amp1>; + }; + + codec@2 { + sound-dai = <&linein>; + }; + + }; + + dai-link@7 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link@8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; +}; + +&ethmac { + status = "okay"; + pinctrl-0 = <&eth_rgmii_y_pins>; + pinctrl-names = "default"; + phy-handle = <&eth_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + speaker_amp1: audio-codec@1b { + compatible = "ti,tas5707"; + reg = <0x1b>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&vcc_3v3>; + DVDD-supply = <&vcc_3v3>; + PVDD_A-supply = <&main_12v>; + PVDD_B-supply = <&main_12v>; + PVDD_C-supply = <&main_12v>; + PVDD_D-supply = <&main_12v>; + sound-name-prefix = "SPK1"; + }; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; + + gpio_speaker: gpio-controller@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vddao_3v3>; + }; +}; + +&pdm { + pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, + <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "disabled"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_a20_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_a { + pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, + <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, + <&tdmb_din3_pins>, <&mclk_b_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_c { + pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, + <&tdmc_din1_pins>, <&tdmc_dout2_pins>, + <&mclk_c_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi new file mode 100644 index 0000000..df017db --- /dev/null +++ b/arch/arm/dts/meson-axg.dtsi @@ -0,0 +1,1589 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/clock/axg-clkc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-axg-reset.h> + +/ { + compatible = "amlogic,meson-axg"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 16 MiB reserved for Hardware ROM Firmware */ + hwrom_reserved: hwrom@0 { + reg = <0x0 0x0 0x0 0x1000000>; + no-map; + }; + + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + }; + + pdm: audio-controller@ff632000 { + compatible = "amlogic,axg-pdm"; + reg = <0x0 0xff632000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + periphs: bus@ff634000 { + compatible = "simple-bus"; + reg = <0x0 0xff634000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + + hwrng: rng@18 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x18 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; + }; + + pinctrl_periphs: pinctrl@480 { + compatible = "amlogic,meson-axg-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@480 { + reg = <0x0 0x00480 0x0 0x40>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x3c>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 0 86>; + }; + + i2c0_pins: i2c0 { + mux { + groups = "i2c0_sck", + "i2c0_sda"; + function = "i2c0"; + }; + }; + + i2c1_x_pins: i2c1_x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + }; + }; + + i2c1_z_pins: i2c1_z { + mux { + groups = "i2c1_sck_z", + "i2c1_sda_z"; + function = "i2c1"; + }; + }; + + i2c2_a_pins: i2c2_a { + mux { + groups = "i2c2_sck_a", + "i2c2_sda_a"; + function = "i2c2"; + }; + }; + + i2c2_x_pins: i2c2_x { + mux { + groups = "i2c2_sck_x", + "i2c2_sda_x"; + function = "i2c2"; + }; + }; + + i2c3_a6_pins: i2c3_a6 { + mux { + groups = "i2c3_sda_a6", + "i2c3_sck_a7"; + function = "i2c3"; + }; + }; + + i2c3_a12_pins: i2c3_a12 { + mux { + groups = "i2c3_sda_a12", + "i2c3_sck_a13"; + function = "i2c3"; + }; + }; + + i2c3_a19_pins: i2c3_a19 { + mux { + groups = "i2c3_sda_a19", + "i2c3_sck_a20"; + function = "i2c3"; + }; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; + function = "emmc"; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + + eth_rgmii_x_pins: eth-x-rgmii { + mux { + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + eth_rgmii_y_pins: eth-y-rgmii { + mux { + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + }; + }; + + eth_rmii_x_pins: eth-x-rmii { + mux { + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x"; + function = "eth"; + }; + }; + + eth_rmii_y_pins: eth-y-rmii { + mux { + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y"; + function = "eth"; + }; + }; + + mclk_b_pins: mclk_b { + mux { + groups = "mclk_b"; + function = "mclk_b"; + }; + }; + + mclk_c_pins: mclk_c { + mux { + groups = "mclk_c"; + function = "mclk_c"; + }; + }; + + pdm_dclk_a14_pins: pdm_dclk_a14 { + mux { + groups = "pdm_dclk_a14"; + function = "pdm"; + }; + }; + + pdm_dclk_a19_pins: pdm_dclk_a19 { + mux { + groups = "pdm_dclk_a19"; + function = "pdm"; + }; + }; + + pdm_din0_pins: pdm_din0 { + mux { + groups = "pdm_din0"; + function = "pdm"; + }; + }; + + pdm_din1_pins: pdm_din1 { + mux { + groups = "pdm_din1"; + function = "pdm"; + }; + }; + + pdm_din2_pins: pdm_din2 { + mux { + groups = "pdm_din2"; + function = "pdm"; + }; + }; + + pdm_din3_pins: pdm_din3 { + mux { + groups = "pdm_din3"; + function = "pdm"; + }; + }; + + pwm_a_a_pins: pwm_a_a { + mux { + groups = "pwm_a_a"; + function = "pwm_a"; + }; + }; + + pwm_a_x18_pins: pwm_a_x18 { + mux { + groups = "pwm_a_x18"; + function = "pwm_a"; + }; + }; + + pwm_a_x20_pins: pwm_a_x20 { + mux { + groups = "pwm_a_x20"; + function = "pwm_a"; + }; + }; + + pwm_a_z_pins: pwm_a_z { + mux { + groups = "pwm_a_z"; + function = "pwm_a"; + }; + }; + + pwm_b_a_pins: pwm_b_a { + mux { + groups = "pwm_b_a"; + function = "pwm_b"; + }; + }; + + pwm_b_x_pins: pwm_b_x { + mux { + groups = "pwm_b_x"; + function = "pwm_b"; + }; + }; + + pwm_b_z_pins: pwm_b_z { + mux { + groups = "pwm_b_z"; + function = "pwm_b"; + }; + }; + + pwm_c_a_pins: pwm_c_a { + mux { + groups = "pwm_c_a"; + function = "pwm_c"; + }; + }; + + pwm_c_x10_pins: pwm_c_x10 { + mux { + groups = "pwm_c_x10"; + function = "pwm_c"; + }; + }; + + pwm_c_x17_pins: pwm_c_x17 { + mux { + groups = "pwm_c_x17"; + function = "pwm_c"; + }; + }; + + pwm_d_x11_pins: pwm_d_x11 { + mux { + groups = "pwm_d_x11"; + function = "pwm_d"; + }; + }; + + pwm_d_x16_pins: pwm_d_x16 { + mux { + groups = "pwm_d_x16"; + function = "pwm_d"; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + + spdif_in_z_pins: spdif_in_z { + mux { + groups = "spdif_in_z"; + function = "spdif_in"; + }; + }; + + spdif_in_a1_pins: spdif_in_a1 { + mux { + groups = "spdif_in_a1"; + function = "spdif_in"; + }; + }; + + spdif_in_a7_pins: spdif_in_a7 { + mux { + groups = "spdif_in_a7"; + function = "spdif_in"; + }; + }; + + spdif_in_a19_pins: spdif_in_a19 { + mux { + groups = "spdif_in_a19"; + function = "spdif_in"; + }; + }; + + spdif_in_a20_pins: spdif_in_a20 { + mux { + groups = "spdif_in_a20"; + function = "spdif_in"; + }; + }; + + spdif_out_a1_pins: spdif_out_a1 { + mux { + groups = "spdif_out_a1"; + function = "spdif_out"; + }; + }; + + spdif_out_a11_pins: spdif_out_a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + }; + }; + + spdif_out_a19_pins: spdif_out_a19 { + mux { + groups = "spdif_out_a19"; + function = "spdif_out"; + }; + }; + + spdif_out_a20_pins: spdif_out_a20 { + mux { + groups = "spdif_out_a20"; + function = "spdif_out"; + }; + }; + + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + + spi0_pins: spi0 { + mux { + groups = "spi0_miso", + "spi0_mosi", + "spi0_clk"; + function = "spi0"; + }; + }; + + spi0_ss0_pins: spi0_ss0 { + mux { + groups = "spi0_ss0"; + function = "spi0"; + }; + }; + + spi0_ss1_pins: spi0_ss1 { + mux { + groups = "spi0_ss1"; + function = "spi0"; + }; + }; + + spi0_ss2_pins: spi0_ss2 { + mux { + groups = "spi0_ss2"; + function = "spi0"; + }; + }; + + spi1_a_pins: spi1_a { + mux { + groups = "spi1_miso_a", + "spi1_mosi_a", + "spi1_clk_a"; + function = "spi1"; + }; + }; + + spi1_ss0_a_pins: spi1_ss0_a { + mux { + groups = "spi1_ss0_a"; + function = "spi1"; + }; + }; + + spi1_ss1_pins: spi1_ss1 { + mux { + groups = "spi1_ss1"; + function = "spi1"; + }; + }; + + spi1_x_pins: spi1_x { + mux { + groups = "spi1_miso_x", + "spi1_mosi_x", + "spi1_clk_x"; + function = "spi1"; + }; + }; + + spi1_ss0_x_pins: spi1_ss0_x { + mux { + groups = "spi1_ss0_x"; + function = "spi1"; + }; + }; + + tdma_din0_pins: tdma_din0 { + mux { + groups = "tdma_din0"; + function = "tdma"; + }; + }; + + tdma_dout0_x14_pins: tdma_dout0_x14 { + mux { + groups = "tdma_dout0_x14"; + function = "tdma"; + }; + }; + + tdma_dout0_x15_pins: tdma_dout0_x15 { + mux { + groups = "tdma_dout0_x15"; + function = "tdma"; + }; + }; + + tdma_dout1_pins: tdma_dout1 { + mux { + groups = "tdma_dout1"; + function = "tdma"; + }; + }; + + tdma_din1_pins: tdma_din1 { + mux { + groups = "tdma_din1"; + function = "tdma"; + }; + }; + + tdma_fs_pins: tdma_fs { + mux { + groups = "tdma_fs"; + function = "tdma"; + }; + }; + + tdma_fs_slv_pins: tdma_fs_slv { + mux { + groups = "tdma_fs_slv"; + function = "tdma"; + }; + }; + + tdma_sclk_pins: tdma_sclk { + mux { + groups = "tdma_sclk"; + function = "tdma"; + }; + }; + + tdma_sclk_slv_pins: tdma_sclk_slv { + mux { + groups = "tdma_sclk_slv"; + function = "tdma"; + }; + }; + + tdmb_din0_pins: tdmb_din0 { + mux { + groups = "tdmb_din0"; + function = "tdmb"; + }; + }; + + tdmb_din1_pins: tdmb_din1 { + mux { + groups = "tdmb_din1"; + function = "tdmb"; + }; + }; + + tdmb_din2_pins: tdmb_din2 { + mux { + groups = "tdmb_din2"; + function = "tdmb"; + }; + }; + + tdmb_din3_pins: tdmb_din3 { + mux { + groups = "tdmb_din3"; + function = "tdmb"; + }; + }; + + tdmb_dout0_pins: tdmb_dout0 { + mux { + groups = "tdmb_dout0"; + function = "tdmb"; + }; + }; + + tdmb_dout1_pins: tdmb_dout1 { + mux { + groups = "tdmb_dout1"; + function = "tdmb"; + }; + }; + + tdmb_dout2_pins: tdmb_dout2 { + mux { + groups = "tdmb_dout2"; + function = "tdmb"; + }; + }; + + tdmb_dout3_pins: tdmb_dout3 { + mux { + groups = "tdmb_dout3"; + function = "tdmb"; + }; + }; + + tdmb_fs_pins: tdmb_fs { + mux { + groups = "tdmb_fs"; + function = "tdmb"; + }; + }; + + tdmb_fs_slv_pins: tdmb_fs_slv { + mux { + groups = "tdmb_fs_slv"; + function = "tdmb"; + }; + }; + + tdmb_sclk_pins: tdmb_sclk { + mux { + groups = "tdmb_sclk"; + function = "tdmb"; + }; + }; + + tdmb_sclk_slv_pins: tdmb_sclk_slv { + mux { + groups = "tdmb_sclk_slv"; + function = "tdmb"; + }; + }; + + tdmc_fs_pins: tdmc_fs { + mux { + groups = "tdmc_fs"; + function = "tdmc"; + }; + }; + + tdmc_fs_slv_pins: tdmc_fs_slv { + mux { + groups = "tdmc_fs_slv"; + function = "tdmc"; + }; + }; + + tdmc_sclk_pins: tdmc_sclk { + mux { + groups = "tdmc_sclk"; + function = "tdmc"; + }; + }; + + tdmc_sclk_slv_pins: tdmc_sclk_slv { + mux { + groups = "tdmc_sclk_slv"; + function = "tdmc"; + }; + }; + + tdmc_din0_pins: tdmc_din0 { + mux { + groups = "tdmc_din0"; + function = "tdmc"; + }; + }; + + tdmc_din1_pins: tdmc_din1 { + mux { + groups = "tdmc_din1"; + function = "tdmc"; + }; + }; + + tdmc_din2_pins: tdmc_din2 { + mux { + groups = "tdmc_din2"; + function = "tdmc"; + }; + }; + + tdmc_din3_pins: tdmc_din3 { + mux { + groups = "tdmc_din3"; + function = "tdmc"; + }; + }; + + tdmc_dout0_pins: tdmc_dout0 { + mux { + groups = "tdmc_dout0"; + function = "tdmc"; + }; + }; + + tdmc_dout1_pins: tdmc_dout1 { + mux { + groups = "tdmc_dout1"; + function = "tdmc"; + }; + }; + + tdmc_dout2_pins: tdmc_dout2 { + mux { + groups = "tdmc_dout2"; + function = "tdmc"; + }; + }; + + tdmc_dout3_pins: tdmc_dout3 { + mux { + groups = "tdmc_dout3"; + function = "tdmc"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + + uart_b_x_pins: uart_b_x { + mux { + groups = "uart_tx_b_x", + "uart_rx_b_x"; + function = "uart_b"; + }; + }; + + uart_b_x_cts_rts_pins: uart_b_x_cts_rts { + mux { + groups = "uart_cts_b_x", + "uart_rts_b_x"; + function = "uart_b"; + }; + }; + + uart_b_z_pins: uart_b_z { + mux { + groups = "uart_tx_b_z", + "uart_rx_b_z"; + function = "uart_b"; + }; + }; + + uart_b_z_cts_rts_pins: uart_b_z_cts_rts { + mux { + groups = "uart_cts_b_z", + "uart_rts_b_z"; + function = "uart_b"; + }; + }; + + uart_ao_b_z_pins: uart_ao_b_z { + mux { + groups = "uart_ao_tx_b_z", + "uart_ao_rx_b_z"; + function = "uart_ao_b_z"; + }; + }; + + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + mux { + groups = "uart_ao_cts_b_z", + "uart_ao_rts_b_z"; + function = "uart_ao_b_z"; + }; + }; + }; + }; + + hiubus: bus@ff63c000 { + compatible = "simple-bus"; + reg = <0x0 0xff63c000 0x0 0x1c00>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; + }; + }; + + mailbox: mailbox@ff63dc00 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0xff63dc00 0 0x400>; + interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-axg-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-axg-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 15>; + }; + + i2c_ao_sck_4_pins: i2c_ao_sck_4 { + mux { + groups = "i2c_ao_sck_4"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_8_pins: i2c_ao_sck_8 { + mux { + groups = "i2c_ao_sck_8"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_10_pins: i2c_ao_sck_10 { + mux { + groups = "i2c_ao_sck_10"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_5_pins: i2c_ao_sda_5 { + mux { + groups = "i2c_ao_sda_5"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_9_pins: i2c_ao_sda_9 { + mux { + groups = "i2c_ao_sda_9"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_11_pins: i2c_ao_sda_11 { + mux { + groups = "i2c_ao_sda_11"; + function = "i2c_ao"; + }; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_ao_tx_a", + "uart_ao_rx_a"; + function = "uart_ao_a"; + }; + }; + + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_ao_cts_a", + "uart_ao_rts_a"; + function = "uart_ao_a"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_ao_tx_b", + "uart_ao_rx_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_ao_cts_b", + "uart_ao_rts_b"; + function = "uart_ao_b"; + }; + }; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x02000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-axg-ao-pwm"; + reg = <0x0 0x07000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + saradc: adc@9000 { + compatible = "amlogic,meson-axg-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x38>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x25000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x01004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-axg-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + spicc0: spi@13000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x13000 0x0 0x3c>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC0>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@15000 { + compatible = "amlogic,meson-axg-spicc"; + reg = <0x0 0x15000 0x0 0x3c>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_SPICC1>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + }; + + apb: bus@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x800>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x800>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + + sram: sram@fffc0000 { + compatible = "amlogic,meson-axg-sram", "mmio-sram"; + reg = <0x0 0xfffc0000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xfffc0000 0x20000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-axg-scp-shmem"; + reg = <0x13400 0x400>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h new file mode 100644 index 0000000..6195501 --- /dev/null +++ b/include/dt-bindings/clock/axg-aoclkc.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai qiufang.dai@amlogic.com + */ + +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_AXG_AOCLK + +#define CLKID_AO_REMOTE 0 +#define CLKID_AO_I2C_MASTER 1 +#define CLKID_AO_I2C_SLAVE 2 +#define CLKID_AO_UART1 3 +#define CLKID_AO_UART2 4 +#define CLKID_AO_IR_BLASTER 5 +#define CLKID_AO_SAR_ADC 6 +#define CLKID_AO_CLK81 7 +#define CLKID_AO_SAR_ADC_SEL 8 +#define CLKID_AO_SAR_ADC_DIV 9 +#define CLKID_AO_SAR_ADC_CLK 10 +#define CLKID_AO_ALT_XTAL 11 + +#endif diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h new file mode 100644 index 0000000..fd9c362 --- /dev/null +++ b/include/dt-bindings/clock/axg-audio-clkc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet jbrunet@baylibre.com + */ + +#ifndef __AXG_AUDIO_CLKC_BINDINGS_H +#define __AXG_AUDIO_CLKC_BINDINGS_H + +#define AUD_CLKID_SLV_SCLK0 9 +#define AUD_CLKID_SLV_SCLK1 10 +#define AUD_CLKID_SLV_SCLK2 11 +#define AUD_CLKID_SLV_SCLK3 12 +#define AUD_CLKID_SLV_SCLK4 13 +#define AUD_CLKID_SLV_SCLK5 14 +#define AUD_CLKID_SLV_SCLK6 15 +#define AUD_CLKID_SLV_SCLK7 16 +#define AUD_CLKID_SLV_SCLK8 17 +#define AUD_CLKID_SLV_SCLK9 18 +#define AUD_CLKID_SLV_LRCLK0 19 +#define AUD_CLKID_SLV_LRCLK1 20 +#define AUD_CLKID_SLV_LRCLK2 21 +#define AUD_CLKID_SLV_LRCLK3 22 +#define AUD_CLKID_SLV_LRCLK4 23 +#define AUD_CLKID_SLV_LRCLK5 24 +#define AUD_CLKID_SLV_LRCLK6 25 +#define AUD_CLKID_SLV_LRCLK7 26 +#define AUD_CLKID_SLV_LRCLK8 27 +#define AUD_CLKID_SLV_LRCLK9 28 +#define AUD_CLKID_DDR_ARB 29 +#define AUD_CLKID_PDM 30 +#define AUD_CLKID_TDMIN_A 31 +#define AUD_CLKID_TDMIN_B 32 +#define AUD_CLKID_TDMIN_C 33 +#define AUD_CLKID_TDMIN_LB 34 +#define AUD_CLKID_TDMOUT_A 35 +#define AUD_CLKID_TDMOUT_B 36 +#define AUD_CLKID_TDMOUT_C 37 +#define AUD_CLKID_FRDDR_A 38 +#define AUD_CLKID_FRDDR_B 39 +#define AUD_CLKID_FRDDR_C 40 +#define AUD_CLKID_TODDR_A 41 +#define AUD_CLKID_TODDR_B 42 +#define AUD_CLKID_TODDR_C 43 +#define AUD_CLKID_LOOPBACK 44 +#define AUD_CLKID_SPDIFIN 45 +#define AUD_CLKID_SPDIFOUT 46 +#define AUD_CLKID_RESAMPLE 47 +#define AUD_CLKID_POWER_DETECT 48 +#define AUD_CLKID_MST_A_MCLK 49 +#define AUD_CLKID_MST_B_MCLK 50 +#define AUD_CLKID_MST_C_MCLK 51 +#define AUD_CLKID_MST_D_MCLK 52 +#define AUD_CLKID_MST_E_MCLK 53 +#define AUD_CLKID_MST_F_MCLK 54 +#define AUD_CLKID_SPDIFOUT_CLK 55 +#define AUD_CLKID_SPDIFIN_CLK 56 +#define AUD_CLKID_PDM_DCLK 57 +#define AUD_CLKID_PDM_SYSCLK 58 +#define AUD_CLKID_MST_A_SCLK 79 +#define AUD_CLKID_MST_B_SCLK 80 +#define AUD_CLKID_MST_C_SCLK 81 +#define AUD_CLKID_MST_D_SCLK 82 +#define AUD_CLKID_MST_E_SCLK 83 +#define AUD_CLKID_MST_F_SCLK 84 +#define AUD_CLKID_MST_A_LRCLK 86 +#define AUD_CLKID_MST_B_LRCLK 87 +#define AUD_CLKID_MST_C_LRCLK 88 +#define AUD_CLKID_MST_D_LRCLK 89 +#define AUD_CLKID_MST_E_LRCLK 90 +#define AUD_CLKID_MST_F_LRCLK 91 +#define AUD_CLKID_TDMIN_A_SCLK_SEL 116 +#define AUD_CLKID_TDMIN_B_SCLK_SEL 117 +#define AUD_CLKID_TDMIN_C_SCLK_SEL 118 +#define AUD_CLKID_TDMIN_LB_SCLK_SEL 119 +#define AUD_CLKID_TDMOUT_A_SCLK_SEL 120 +#define AUD_CLKID_TDMOUT_B_SCLK_SEL 121 +#define AUD_CLKID_TDMOUT_C_SCLK_SEL 122 +#define AUD_CLKID_TDMIN_A_SCLK 123 +#define AUD_CLKID_TDMIN_B_SCLK 124 +#define AUD_CLKID_TDMIN_C_SCLK 125 +#define AUD_CLKID_TDMIN_LB_SCLK 126 +#define AUD_CLKID_TDMOUT_A_SCLK 127 +#define AUD_CLKID_TDMOUT_B_SCLK 128 +#define AUD_CLKID_TDMOUT_C_SCLK 129 +#define AUD_CLKID_TDMIN_A_LRCLK 130 +#define AUD_CLKID_TDMIN_B_LRCLK 131 +#define AUD_CLKID_TDMIN_C_LRCLK 132 +#define AUD_CLKID_TDMIN_LB_LRCLK 133 +#define AUD_CLKID_TDMOUT_A_LRCLK 134 +#define AUD_CLKID_TDMOUT_B_LRCLK 135 +#define AUD_CLKID_TDMOUT_C_LRCLK 136 + +#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */ diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h new file mode 100644 index 0000000..fd1f938 --- /dev/null +++ b/include/dt-bindings/clock/axg-clkc.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Meson-AXG clock tree IDs + * + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + */ + +#ifndef __AXG_CLKC_H +#define __AXG_CLKC_H + +#define CLKID_SYS_PLL 0 +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 2 +#define CLKID_FCLK_DIV3 3 +#define CLKID_FCLK_DIV4 4 +#define CLKID_FCLK_DIV5 5 +#define CLKID_FCLK_DIV7 6 +#define CLKID_GP0_PLL 7 +#define CLKID_CLK81 10 +#define CLKID_MPLL0 11 +#define CLKID_MPLL1 12 +#define CLKID_MPLL2 13 +#define CLKID_MPLL3 14 +#define CLKID_DDR 15 +#define CLKID_AUDIO_LOCKER 16 +#define CLKID_MIPI_DSI_HOST 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 +#define CLKID_SPICC0 21 +#define CLKID_I2C 22 +#define CLKID_RNG0 23 +#define CLKID_UART0 24 +#define CLKID_MIPI_DSI_PHY 25 +#define CLKID_SPICC1 26 +#define CLKID_PCIE_A 27 +#define CLKID_PCIE_B 28 +#define CLKID_HIU_IFACE 29 +#define CLKID_ASSIST_MISC 30 +#define CLKID_SD_EMMC_B 31 +#define CLKID_SD_EMMC_C 32 +#define CLKID_DMA 33 +#define CLKID_SPI 34 +#define CLKID_AUDIO 35 +#define CLKID_ETH 36 +#define CLKID_UART1 37 +#define CLKID_G2D 38 +#define CLKID_USB0 39 +#define CLKID_USB1 40 +#define CLKID_RESET 41 +#define CLKID_USB 42 +#define CLKID_AHB_ARB0 43 +#define CLKID_EFUSE 44 +#define CLKID_BOOT_ROM 45 +#define CLKID_AHB_DATA_BUS 46 +#define CLKID_AHB_CTRL_BUS 47 +#define CLKID_USB1_DDR_BRIDGE 48 +#define CLKID_USB0_DDR_BRIDGE 49 +#define CLKID_MMC_PCLK 50 +#define CLKID_VPU_INTR 51 +#define CLKID_SEC_AHB_AHB3_BRIDGE 52 +#define CLKID_GIC 53 +#define CLKID_AO_MEDIA_CPU 54 +#define CLKID_AO_AHB_SRAM 55 +#define CLKID_AO_AHB_BUS 56 +#define CLKID_AO_IFACE 57 +#define CLKID_AO_I2C 58 +#define CLKID_SD_EMMC_B_CLK0 59 +#define CLKID_SD_EMMC_C_CLK0 60 +#define CLKID_HIFI_PLL 69 +#define CLKID_PCIE_CML_EN0 79 +#define CLKID_PCIE_CML_EN1 80 +#define CLKID_MIPI_ENABLE 81 +#define CLKID_GEN_CLK 84 + +#endif /* __AXG_CLKC_H */ diff --git a/include/dt-bindings/gpio/meson-axg-gpio.h b/include/dt-bindings/gpio/meson-axg-gpio.h new file mode 100644 index 0000000..25bb1ff --- /dev/null +++ b/include/dt-bindings/gpio/meson-axg-gpio.h @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2017 Amlogic, Inc. All rights reserved. + * Author: Xingyu Chen xingyu.chen@amlogic.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DT_BINDINGS_MESON_AXG_GPIO_H +#define _DT_BINDINGS_MESON_AXG_GPIO_H + +/* First GPIO chip */ +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 +#define GPIOAO_10 10 +#define GPIOAO_11 11 +#define GPIOAO_12 12 +#define GPIOAO_13 13 +#define GPIO_TEST_N 14 + +/* Second GPIO chip */ +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define BOOT_0 11 +#define BOOT_1 12 +#define BOOT_2 13 +#define BOOT_3 14 +#define BOOT_4 15 +#define BOOT_5 16 +#define BOOT_6 17 +#define BOOT_7 18 +#define BOOT_8 19 +#define BOOT_9 20 +#define BOOT_10 21 +#define BOOT_11 22 +#define BOOT_12 23 +#define BOOT_13 24 +#define BOOT_14 25 +#define GPIOA_0 26 +#define GPIOA_1 27 +#define GPIOA_2 28 +#define GPIOA_3 29 +#define GPIOA_4 30 +#define GPIOA_5 31 +#define GPIOA_6 32 +#define GPIOA_7 33 +#define GPIOA_8 34 +#define GPIOA_9 35 +#define GPIOA_10 36 +#define GPIOA_11 37 +#define GPIOA_12 38 +#define GPIOA_13 39 +#define GPIOA_14 40 +#define GPIOA_15 41 +#define GPIOA_16 42 +#define GPIOA_17 43 +#define GPIOA_18 44 +#define GPIOA_19 45 +#define GPIOA_20 46 +#define GPIOX_0 47 +#define GPIOX_1 48 +#define GPIOX_2 49 +#define GPIOX_3 50 +#define GPIOX_4 51 +#define GPIOX_5 52 +#define GPIOX_6 53 +#define GPIOX_7 54 +#define GPIOX_8 55 +#define GPIOX_9 56 +#define GPIOX_10 57 +#define GPIOX_11 58 +#define GPIOX_12 59 +#define GPIOX_13 60 +#define GPIOX_14 61 +#define GPIOX_15 62 +#define GPIOX_16 63 +#define GPIOX_17 64 +#define GPIOX_18 65 +#define GPIOX_19 66 +#define GPIOX_20 67 +#define GPIOX_21 68 +#define GPIOX_22 69 +#define GPIOY_0 70 +#define GPIOY_1 71 +#define GPIOY_2 72 +#define GPIOY_3 73 +#define GPIOY_4 74 +#define GPIOY_5 75 +#define GPIOY_6 76 +#define GPIOY_7 77 +#define GPIOY_8 78 +#define GPIOY_9 79 +#define GPIOY_10 80 +#define GPIOY_11 81 +#define GPIOY_12 82 +#define GPIOY_13 83 +#define GPIOY_14 84 +#define GPIOY_15 85 + +#endif /* _DT_BINDINGS_MESON_AXG_GPIO_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h new file mode 100644 index 0000000..05c3636 --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) + * + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet jbrunet@baylibre.com + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H +#define _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H + +#define AXG_ARB_TODDR_A 0 +#define AXG_ARB_TODDR_B 1 +#define AXG_ARB_TODDR_C 2 +#define AXG_ARB_FRDDR_A 3 +#define AXG_ARB_FRDDR_B 4 +#define AXG_ARB_FRDDR_C 5 + +#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h new file mode 100644 index 0000000..ad6f55d --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-axg-reset.h @@ -0,0 +1,124 @@ +/* + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong narmstrong@baylibre.com + * + * Copyright (c) 2017 Amlogic, inc. + * Author: Yixun Lan yixun.lan@amlogic.com + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD) + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +#define RESET_PCIE_A 1 +#define RESET_PCIE_B 2 +#define RESET_DDR_TOP 3 +/* 4 */ +#define RESET_VIU 5 +#define RESET_PCIE_PHY 6 +#define RESET_PCIE_APB 7 +/* 8 */ +/* 9 */ +#define RESET_VENC 10 +#define RESET_ASSIST 11 +/* 12 */ +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +/* 18-21 */ +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +/* 28-31 */ +/* RESET1 */ +/* 32 */ +/* 33 */ +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +/* 37 */ +#define RESET_AHB_SRAM 38 +/* 39 */ +/* 40 */ +#define RESET_DMA 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +/* 44 */ +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61-63 */ +/* RESET2 */ +/* 64 */ +/* 65 */ +#define RESET_AUDIO 66 +/* 67 */ +#define RESET_MIPI_HOST 68 +#define RESET_AUDIO_LOCKER 69 +#define RESET_GE2D 70 +/* 71-76 */ +#define RESET_AO_CPU_RESET 77 +/* 78-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +/* 97-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +#define RESET_MIPI_PHY 130 +/* 131-140 */ +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +/* 194 */ +/* 195 */ +#define RESET_PERIPHS_I2C_MASTER_0 196 +/* 197-200 */ +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1 202 +/* 203-204 */ +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_I2C_MASTER_3 206 +/* 207-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +#define RESET_DMC_VPU_PIPEL 233 +/* 234-255 */ + +#endif diff --git a/include/dt-bindings/reset/axg-aoclkc.h b/include/dt-bindings/reset/axg-aoclkc.h new file mode 100644 index 0000000..d342c0b --- /dev/null +++ b/include/dt-bindings/reset/axg-aoclkc.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai qiufang.dai@amlogic.com + */ + +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK +#define DT_BINDINGS_RESET_AMLOGIC_MESON_AXG_AOCLK + +#define RESET_AO_REMOTE 0 +#define RESET_AO_I2C_MASTER 1 +#define RESET_AO_I2C_SLAVE 2 +#define RESET_AO_UART1 3 +#define RESET_AO_UART2 4 +#define RESET_AO_IR_BLASTER 5 + +#endif

The S400 board is the Amlogic AXG SoC reference board including : - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz - 1GB DDR4 SDRAM - 10/100 Ethernet - 2 x USB 2.0 Host - eMMC - Infrared receiver - SDIO WiFi Module - MIPI DSI Connector - Audio HAT Connector - PCI-E M.2 Connectors

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/mach-meson/Kconfig | 1 + board/amlogic/s400/MAINTAINERS | 6 +++ board/amlogic/s400/Makefile | 6 +++ board/amlogic/s400/README | 110 +++++++++++++++++++++++++++++++++++++++++ board/amlogic/s400/s400.c | 33 +++++++++++++ configs/s400_defconfig | 38 ++++++++++++++ 6 files changed, 194 insertions(+) create mode 100644 board/amlogic/s400/MAINTAINERS create mode 100644 board/amlogic/s400/Makefile create mode 100644 board/amlogic/s400/README create mode 100644 board/amlogic/s400/s400.c create mode 100644 configs/s400_defconfig

diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 7f217fa..deddcc5 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -63,6 +63,7 @@ config SYS_BOARD default "odroid-c2" if MESON_GXBB default "p212" if MESON_GXL default "q200" if MESON_GXM + default "s400" if MESON_AXG default "" help This option contains information about board name. diff --git a/board/amlogic/s400/MAINTAINERS b/board/amlogic/s400/MAINTAINERS new file mode 100644 index 0000000..9ca9836 --- /dev/null +++ b/board/amlogic/s400/MAINTAINERS @@ -0,0 +1,6 @@ +S400 +M: Neil Armstrong narmstrong@baylibre.com +S: Maintained +F: board/amlogic/s400/ +F: include/configs/s400.h +F: configs/s400_defconfig diff --git a/board/amlogic/s400/Makefile b/board/amlogic/s400/Makefile new file mode 100644 index 0000000..bf03862 --- /dev/null +++ b/board/amlogic/s400/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2016 BayLibre, SAS +# Author: Neil Armstrong narmstrong@baylibre.com + +obj-y := s400.o diff --git a/board/amlogic/s400/README b/board/amlogic/s400/README new file mode 100644 index 0000000..29ccf2d --- /dev/null +++ b/board/amlogic/s400/README @@ -0,0 +1,110 @@ +U-Boot for Amlogic S400 +======================= + +S400 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz + - 1GB DDR4 SDRAM + - 10/100 Ethernet + - 2 x USB 2.0 Host + - eMMC + - Infrared receiver + - SDIO WiFi Module + - MIPI DSI Connector + - Audio HAT Connector + - PCI-E M.2 Connectors + +Schematics are available from Amlogic on demand. + +Currently the u-boot port supports the following devices: + - serial + - eMMC + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make s400_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + > cd amlogic-u-boot + > make axg_s400_v1_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + > mkdir fip + + > cp $FIPDIR/axg/bl2.bin fip/ + > cp $FIPDIR/axg/acs.bin fip/ + > cp $FIPDIR/axg/bl21.bin fip/ + > cp $FIPDIR/axg/bl30.bin fip/ + > cp $FIPDIR/axg/bl301.bin fip/ + > cp $FIPDIR/axg/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + > $FIPDIR/axg/aml_encrypt_axg --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc --level v3 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/s400/s400.c b/board/amlogic/s400/s400.c new file mode 100644 index 0000000..c2b50f6 --- /dev/null +++ b/board/amlogic/s400/s400.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include <common.h> +#include <dm.h> +#include <environment.h> +#include <asm/io.h> +#include <asm/arch/axg.h> +#include <asm/arch/sm.h> +#include <asm/arch/eth.h> +#include <asm/arch/mem.h> + +int board_init(void) +{ + return 0; +} + +int misc_init_r(void) +{ + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + meson_init_reserved_memory(blob); + + return 0; +} diff --git a/configs/s400_defconfig b/configs/s400_defconfig new file mode 100644 index 0000000..1bd4b71 --- /dev/null +++ b/configs/s400_defconfig @@ -0,0 +1,38 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_MESON_AXG=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" s400" +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-axg-s400" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_AXG=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_OF_LIBFDT_OVERLAY=y

The Amlogic Meson SoCs ROM supports a boot over USB with a custom protocol.

When no other boot medium are available (or by forcing the USB mode), the ROM sets the primary USB port as device mode and waits for a Host to enumerate.

When enumerated, a custom protocol described at [1] permits writing to memory and execution some specific FIP init code to run the loaded Arm Trusted Firmware BL2 and BL3 staged before running the BL33 stage.

In this mode, we can load different binaries that can be used by U-boot like a script image file.

This adds support for a custom USB boot stage only available when the boot mode is USB and the script file at a pre-defined address is valid. This support was heavily copied from the Sunxi Allwinner FEL U-Boot support.

The tool pyamlboot described at [2], permits using this boot mode on boards exposing the first USB port, either as OTG or Host port.

[1] https://github.com/superna9999/pyamlboot/blob/master/PROTOCOL.md [2] https://github.com/superna9999/pyamlboot/blob/master/README.md

Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/include/asm/arch-meson/axg.h | 1 + arch/arm/include/asm/arch-meson/boot.h | 20 +++++++++++++++ arch/arm/include/asm/arch-meson/gx.h | 1 + arch/arm/mach-meson/Kconfig | 1 + arch/arm/mach-meson/board-axg.c | 6 +++++ arch/arm/mach-meson/board-common.c | 45 ++++++++++++++++++++++++++++++++++ arch/arm/mach-meson/board-gx.c | 6 +++++ include/configs/meson64.h | 13 ++++++++++ 8 files changed, 93 insertions(+) create mode 100644 arch/arm/include/asm/arch-meson/boot.h

diff --git a/arch/arm/include/asm/arch-meson/axg.h b/arch/arm/include/asm/arch-meson/axg.h index 28a38b7..d293f2a 100644 --- a/arch/arm/include/asm/arch-meson/axg.h +++ b/arch/arm/include/asm/arch-meson/axg.h @@ -20,6 +20,7 @@ #define AXG_AO_SEC_GP_CFG4 AXG_AO_ADDR(0x94) #define AXG_AO_SEC_GP_CFG5 AXG_AO_ADDR(0x95)

+#define AXG_AO_BOOT_DEVICE 0xF #define AXG_AO_MEM_SIZE_MASK 0xFFFF0000 #define AXG_AO_MEM_SIZE_SHIFT 16 #define AXG_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000 diff --git a/arch/arm/include/asm/arch-meson/boot.h b/arch/arm/include/asm/arch-meson/boot.h new file mode 100644 index 0000000..a90fe55 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/boot.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#ifndef __MESON_BOOT_H__ +#define __MESON_BOOT_H__ + +/* Boot device */ +#define BOOT_DEVICE_RESERVED 0 +#define BOOT_DEVICE_EMMC 1 +#define BOOT_DEVICE_NAND 2 +#define BOOT_DEVICE_SPI 3 +#define BOOT_DEVICE_SD 4 +#define BOOT_DEVICE_USB 5 + +int meson_get_boot_device(void); + +#endif /* __MESON_BOOT_H__ */ diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h index 4bc9475..b781ba9 100644 --- a/arch/arm/include/asm/arch-meson/gx.h +++ b/arch/arm/include/asm/arch-meson/gx.h @@ -21,6 +21,7 @@ #define GX_AO_SEC_GP_CFG4 GX_AO_ADDR(0x94) #define GX_AO_SEC_GP_CFG5 GX_AO_ADDR(0x95)

+#define GX_AO_BOOT_DEVICE 0xF #define GX_AO_MEM_SIZE_MASK 0xFFFF0000 #define GX_AO_MEM_SIZE_SHIFT 16 #define GX_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000 diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index deddcc5..11077bc 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -8,6 +8,7 @@ config MESON64_COMMON select DM_SERIAL select SYSCON select REGMAP + select BOARD_LATE_INIT imply CMD_DM

config MESON_GX diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c index 014b25d..173905e 100644 --- a/arch/arm/mach-meson/board-axg.c +++ b/arch/arm/mach-meson/board-axg.c @@ -5,6 +5,7 @@ */

#include <common.h> +#include <asm/arch/boot.h> #include <asm/arch/eth.h> #include <asm/arch/axg.h> #include <asm/arch/mem.h> @@ -15,6 +16,11 @@

DECLARE_GLOBAL_DATA_PTR;

+int meson_get_boot_device(void) +{ + return readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_BOOT_DEVICE; +} + /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c index 249e0d9..996bd28 100644 --- a/arch/arm/mach-meson/board-common.c +++ b/arch/arm/mach-meson/board-common.c @@ -4,6 +4,7 @@ */

#include <common.h> +#include <asm/arch/boot.h> #include <linux/libfdt.h> #include <linux/err.h> #include <asm/arch/mem.h> @@ -66,6 +67,50 @@ void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) } }

+static void meson_set_boot_source(void) +{ + const char *source; + + switch (meson_get_boot_device()) { + case BOOT_DEVICE_EMMC: + source = "emmc"; + break; + + case BOOT_DEVICE_NAND: + source = "nand"; + break; + + case BOOT_DEVICE_SPI: + source = "spi"; + break; + + case BOOT_DEVICE_SD: + source = "sd"; + break; + + case BOOT_DEVICE_USB: + source = "usb"; + break; + + default: + source = "unknown"; + } + + env_set("boot_source", source); +} + +__weak int meson_board_late_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + meson_set_boot_source(); + + return meson_board_late_init(); +} + void reset_cpu(ulong addr) { psci_system_reset(); diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c index f1397f8..e41552d 100644 --- a/arch/arm/mach-meson/board-gx.c +++ b/arch/arm/mach-meson/board-gx.c @@ -5,6 +5,7 @@ */

#include <common.h> +#include <asm/arch/boot.h> #include <asm/arch/eth.h> #include <asm/arch/gx.h> #include <asm/arch/mem.h> @@ -15,6 +16,11 @@

DECLARE_GLOBAL_DATA_PTR;

+int meson_get_boot_device(void) +{ + return readl(GX_AO_SEC_GP_CFG0) & GX_AO_BOOT_DEVICE; +} + /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h index f961f43..40ac079 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -28,6 +28,18 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */

+/* ROM USB boot support, auto-execute boot.scr at scriptaddr */ +#define BOOTENV_DEV_ROMUSB(devtypeu, devtypel, instance) \ + "bootcmd_romusb=" \ + "if test "${boot_source}" = "usb" && " \ + "test -n "${scriptaddr}"; then " \ + "echo '(ROM USB boot)'; " \ + "source ${scriptaddr}; " \ + "fi\0" + +#define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance) \ + "romusb " + #ifdef CONFIG_CMD_USB #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) #else @@ -36,6 +48,7 @@

#ifndef BOOT_TARGET_DEVICES #define BOOT_TARGET_DEVICES(func) \ + func(ROMUSB, romusb, na) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \