The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com).

Signed-off-by: Stefano Babic sbabic@denx.de --- MAINTAINERS | 5 +++++ MAKEALL | 2 ++ Makefile | 7 ++++++- board/trizepsiv/conxs.c | 22 ++++++++++++---------- include/configs/trizepsiv.h | 25 ++++++++++++++++++++++--- 5 files changed, 47 insertions(+), 14 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS index 9379c7e..7cc26db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -500,6 +500,11 @@ Rowel Atienza rowel@diwalabs.com

armadillo ARM720T

+Stefano Babic sbabic@denx.de + + polaris xscale + trizepsiv xscale + Dirk Behme dirk.behme@gmail.com

omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC) diff --git a/MAKEALL b/MAKEALL index f4599d6..c127472 100755 --- a/MAKEALL +++ b/MAKEALL @@ -604,7 +604,9 @@ LIST_pxa=" \ innokom \ lubbock \ pleb2 \ + polaris \ pxa255_idp \ + trizepsiv \ wepep250 \ xaeniax \ xm250 \ diff --git a/Makefile b/Makefile index acec1a0..3a77988 100644 --- a/Makefile +++ b/Makefile @@ -3082,8 +3082,13 @@ scpu_config: unconfig pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp

+polaris_config \ trizepsiv_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv + @mkdir -p $(obj)include + @if [ "$(findstring polaris,$@)" ] ; then \ + echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ + fi; + @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv

wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c index 5c0eb41..4249e3d 100644 --- a/board/trizepsiv/conxs.c +++ b/board/trizepsiv/conxs.c @@ -44,6 +44,11 @@ extern struct serial_device serial_ffuart_device; extern struct serial_device serial_btuart_device; extern struct serial_device serial_stuart_device;

+#if CONFIG_POLARIS +#define BOOT_CONSOLE "serial_stuart" +#else +#define BOOT_CONSOLE "serial_ffuart" +#endif /* ------------------------------------------------------------------------- */

/* @@ -112,17 +117,14 @@ int board_late_init(void) #if defined(CONFIG_SERIAL_MULTI) char *console=getenv("boot_console");

- if ((strcmp(console,"serial_btuart") == 0) || - (strcmp(console,"serial_stuart") == 0) || - (strcmp(console,"serial_ffuart") == 0)) { - setenv("stdout",console); - setenv("stdin", console); - setenv("stderr",console); - } else { - setenv("stdout", "serial"); - setenv("stdin", "serial"); - setenv("stderr", "serial"); + if ((console == NULL) || (strcmp(console,"serial_btuart") && + strcmp(console,"serial_stuart") && + strcmp(console,"serial_ffuart"))) { + console = BOOT_CONSOLE; } + setenv("stdout",console); + setenv("stdin", console); + setenv("stderr",console); #endif return 0; } diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index bfa7157..fa5aae8 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -239,11 +239,17 @@ #define CONFIG_SYS_GRER1_VAL 0x00000000 #define CONFIG_SYS_GRER2_VAL 0x00000000 #define CONFIG_SYS_GRER3_VAL 0x00000000 -#define CONFIG_SYS_GFER0_VAL 0x00000000 + #define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 #define CONFIG_SYS_GFER3_VAL 0x00000020

+#if CONFIG_POLARIS +#define CONFIG_SYS_GFER0_VAL 0x00000001 +#define CONFIG_SYS_GFER2_VAL 0x00200000 +#else +#define CONFIG_SYS_GFER0_VAL 0x00000000 +#define CONFIG_SYS_GFER2_VAL 0x00000000 +#endif

#define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */

@@ -259,7 +265,11 @@

#define CONFIG_SYS_MSC0_VAL 0x4df84df0 #define CONFIG_SYS_MSC1_VAL 0x7ff87ff4 +#if CONFIG_POLARIS +#define CONFIG_SYS_MSC2_VAL 0xa2697ff8 +#else #define CONFIG_SYS_MSC2_VAL 0xa26936d4 +#endif #define CONFIG_SYS_MDCNFG_VAL 0x880009C9 #define CONFIG_SYS_MDREFR_VAL 0x20ca201e #define CONFIG_SYS_MDMRS_VAL 0x00220022 @@ -280,7 +290,13 @@

#define CONFIG_NET_MULTI 1 #define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x08000000 + +#if CONFIG_POLARIS +#define CONFIG_DM9000_BASE 0x0C800000 +#else +#define CONFIG_DM9000_BASE 0x08000000 +#endif + #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE+0x8004)

@@ -312,6 +328,9 @@ /* write flash less slowly */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1

+/* Unlock to be used with Intel chips */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + /* Flash environment locations */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector */