Dear Kumar Gala,

In message alpine.LFD.2.00.1111290921110.25317@right.am.freescale.net you wrote:

The following changes since commit a63d9652757605ec5f7104addc5d38bf10ba8671:

menu.c: use puts() instead of printf() where possible (2011-11-28 20:19:41 +0100)

are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master

Ira W. Snyder (3): mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification mpc85xx: support board-specific reset function mpc85xx: support for Freescale COM Express P2020

Jia Hongtao (1): powerpc/85xx: fixup flexcan device tree clock-frequency

Kumar Gala (2): powerpc/85xx: Add workaround for erratum CPU-A003999 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning

Shengzhou Liu (1): powerpc/p3060qds: Add board related support for P3060QDS platform

Timur Tabi (4): powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: verify the localbus device tree address before booting the OS

York Sun (1): powerpc/85xx: Add workaround for erratum A-003474

MAINTAINERS | 4 + README | 38 ++ arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 + arch/powerpc/cpu/mpc85xx/cpu.c | 17 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 49 ++- arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 5 + arch/powerpc/cpu/mpc85xx/fdt.c | 63 ++- arch/powerpc/cpu/mpc85xx/release.S | 6 + arch/powerpc/cpu/mpc85xx/start.S | 6 + arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 7 + arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 3 +- arch/powerpc/include/asm/config_mpc85xx.h | 19 + arch/powerpc/include/asm/immap_85xx.h | 1 + board/freescale/common/Makefile | 3 + board/freescale/common/ics307_clk.c | 21 +- board/freescale/common/qixis.c | 151 ++++++ board/freescale/common/qixis.h | 101 ++++ board/freescale/p2020come/Makefile | 46 ++ board/freescale/p2020come/ddr.c | 45 ++ board/freescale/p2020come/law.c | 39 ++ board/freescale/p2020come/p2020come.c | 287 +++++++++++ board/freescale/p2020come/tlb.c | 99 ++++ board/freescale/p3060qds/Makefile | 54 +++ board/freescale/p3060qds/ddr.c | 248 ++++++++++ board/freescale/p3060qds/eth.c | 482 +++++++++++++++++++ board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++ board/freescale/p3060qds/p3060qds.c | 341 ++++++++++++++ board/freescale/p3060qds/p3060qds.h | 30 ++ board/freescale/p3060qds/p3060qds_qixis.h | 74 +++ boards.cfg | 5 + doc/README.p3060qds | 111 +++++ drivers/block/fsl_sata.c | 21 - drivers/block/fsl_sata.h | 1 + drivers/net/fm/fm.c | 32 +- drivers/qe/qe.c | 4 +- include/configs/MPC8569MDS.h | 3 +- include/configs/P1022DS.h | 1 - include/configs/P1023RDS.h | 10 +- include/configs/P2020COME.h | 576 +++++++++++++++++++++++ include/configs/P2041RDB.h | 21 +- include/configs/P3041DS.h | 1 - include/configs/P3060QDS.h | 48 ++ include/configs/P5020DS.h | 1 - include/configs/corenet_ds.h | 22 +- include/configs/p1_p2_rdb_pc.h | 5 +- include/ddr_spd.h | 7 + 46 files changed, 3231 insertions(+), 97 deletions(-) create mode 100644 board/freescale/common/qixis.c create mode 100644 board/freescale/common/qixis.h create mode 100644 board/freescale/p2020come/Makefile create mode 100644 board/freescale/p2020come/ddr.c create mode 100644 board/freescale/p2020come/law.c create mode 100644 board/freescale/p2020come/p2020come.c create mode 100644 board/freescale/p2020come/tlb.c create mode 100644 board/freescale/p3060qds/Makefile create mode 100644 board/freescale/p3060qds/ddr.c create mode 100644 board/freescale/p3060qds/eth.c create mode 100644 board/freescale/p3060qds/fixed_ddr.c create mode 100644 board/freescale/p3060qds/p3060qds.c create mode 100644 board/freescale/p3060qds/p3060qds.h create mode 100644 board/freescale/p3060qds/p3060qds_qixis.h create mode 100644 doc/README.p3060qds create mode 100644 include/configs/P2020COME.h create mode 100644 include/configs/P3060QDS.h

Applied, thanks.

Best regards,

Wolfgang Denk