Reading through the source code, it indicated that it may possibly execute out of RAM at address 0x33F80000 out of the box. However, I was mistaken.

Thanks for your advice.

Tehn Yit Chin Software Engineer, Grey Innovation Pty. Ltd.

-----Original Message----- From: wd@denx.de [mailto:wd@denx.de] Sent: Tuesday, 26 April 2005 10:45 PM To: Tehn-Yit Chin Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] U-boot 1.1.2 on SMDK2410

In message 9AEDBAA573BBD346BCF9637D80097D910FEE41@greysvr02.GreyInnovation.com you wrote:

We attempting to bring u-boot 1.1.2 up on a SMDK2410 board and are

...

Using a ARM RealView ICE, I downloaded the resulting u-boot.bin to address 0x33F80000. Set the PC at 0x33F8000, and start the code

What makes you think this should work?

execution. I was hoping that the serial port would come alive but nothing came out. No signs of life was showing from the board.

Thisis only to be expected. Please install U-Boot in flash as required, and then simply reset the board to start it.

Best regards,

Wolfgang Denk