On 3/22/23 09:42, Stefan Herbrechtsmeier wrote:

From: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com

Read the phy mode of the external phy from the device tree if available and check that it is a RGMII variant.

Signed-off-by: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com

---

Changes in v2:

• Check that the external phy mode is a RGMII variant

  drivers/net/phy/xilinx_gmii2rgmii.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c index 7376283956..853a0df659 100644 --- a/drivers/net/phy/xilinx_gmii2rgmii.c +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -48,7 +48,14 @@ static int xilinxgmiitorgmii_config(struct phy_device *phydev) return -EINVAL; }

• ext_phydev->interface = PHY_INTERFACE_MODE_RGMII;

• ext_phydev->interface = ofnode_read_phy_mode(node);
• if (ext_phydev->interface == PHY_INTERFACE_MODE_NA) {

• ext_phydev->interface = PHY_INTERFACE_MODE_RGMII;
  

• } else if (!phy_interface_is_rgmii(ext_phydev)) {

• printf("Incorrect external interface type\n");
  

• return -EINVAL;
  

• }
• ext_phydev->node = phandle.node; phydev->priv = ext_phydev;

Applied. M