[U-Boot-Users] 405GP configuration.
Hi,
I am working on 405GP AMCC. I want to build u-boot for the 405GP. But in the Makefile I see lot of supports for the 405GP (i.e APC405_config,AR405_config,bamboo_config,bubinga_config) like this. which one i can take and build for my board. And also I don't see which UART they are using also? Can any one help me out.
SR.
--------------------------------- Download prohibited? No problem. CHAT from any browser, without download.
In message 440350.51282.qm@web94306.mail.in2.yahoo.com you wrote:
I am working on 405GP AMCC. I want to build u-boot for the 405GP. But in the Makefile I see lot of supports for the 405GP (i.e APC405_config,AR405_config,bamboo_config,bubinga_config) like this. which one i can take and build for my board. And also I don't see which UART they are using also? Can any one help me out.
You cannot use any of the existing configurations as is for a custom board. You have to *port* U-Boot to your hardware instead.
--0-569205389-1185790757=:51282 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit
And please never again post HTML here!
Best regards,
Wolfgang Denk
participants (2)
-
allam ishita -
Wolfgang Denk