[PATCH 0/4] ARM: amlogic: add Radxa Zero
This series alpha sorts the Amlogic Makefile, then adds support for the Radxa Zero SBC using the device-tree queued in the Amlogic maintainer tree for Linux 5.16.y
Patches are based on custodians/u-boot-amlogic-next
Christian Hewitt (4): ARM: dts: sort Amlogic Makefile section ARM: dts: add support for Radxa Zero boards: amlogic: add Radxa Zero defconfig doc: boards: amlogic: update for Radxa Zero
arch/arm/dts/Makefile | 12 +- .../arm/dts/meson-g12a-radxa-zero-u-boot.dtsi | 7 + arch/arm/dts/meson-g12a-radxa-zero.dts | 405 ++++++++++++++++++ configs/radxa-zero_defconfig | 70 +++ doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/radxa-zero.rst | 74 ++++ 6 files changed, 565 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-radxa-zero.dts create mode 100644 configs/radxa-zero_defconfig create mode 100644 doc/board/amlogic/radxa-zero.rst
Alpha sort the Amlogic dtb list (same as the kernel).
Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- arch/arm/dts/Makefile | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f0160d2dc0..461448c579 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_S5P4418) += \ s5p4418-nanopi2.dtb
dtb-$(CONFIG_ARCH_MESON) += \ + meson-axg-s400.dtb \ meson-gxbb-nanopi-k2.dtb \ meson-gxbb-odroidc2.dtb \ meson-gxbb-nanopi-k2.dtb \ @@ -165,22 +166,22 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-p201.dtb \ meson-gxl-s905x-p212.dtb \ meson-gxl-s805x-libretech-ac.dtb \ + meson-gxl-s905d-libretech-pc.dtb \ + meson-gxl-s905x-khadas-vim.dtb \ meson-gxl-s905x-libretech-cc.dtb \ meson-gxl-s905x-libretech-cc-v2.dtb \ - meson-gxl-s905x-khadas-vim.dtb \ - meson-gxl-s905d-libretech-pc.dtb \ + meson-gxl-s905x-p212.dtb \ meson-gxm-khadas-vim2.dtb \ meson-gxm-s912-libretech-pc.dtb \ meson-gxm-wetek-core2.dtb \ - meson-axg-s400.dtb \ - meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \ + meson-g12a-u200.dtb \ + meson-g12b-a311d-khadas-vim3.dtb \ meson-g12b-gtking.dtb \ meson-g12b-gtking-pro.dtb \ meson-g12b-gsking-x.dtb \ meson-g12b-odroid-n2.dtb \ meson-g12b-odroid-n2-plus.dtb \ - meson-g12b-a311d-khadas-vim3.dtb \ meson-sm1-bananapi-m5.dtb \ meson-sm1-khadas-vim3l.dtb \ meson-sm1-odroid-c4.dtb \
Import the initial dts queued for Linux 5.16.y
Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- arch/arm/dts/Makefile | 1 + .../arm/dts/meson-g12a-radxa-zero-u-boot.dtsi | 7 + arch/arm/dts/meson-g12a-radxa-zero.dts | 405 ++++++++++++++++++ 3 files changed, 413 insertions(+) create mode 100644 arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-radxa-zero.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 461448c579..2ab55f7e2d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -174,6 +174,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxm-khadas-vim2.dtb \ meson-gxm-s912-libretech-pc.dtb \ meson-gxm-wetek-core2.dtb \ + meson-g12a-radxa-zero.dtb \ meson-g12a-sei510.dtb \ meson-g12a-u200.dtb \ meson-g12b-a311d-khadas-vim3.dtb \ diff --git a/arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi b/arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi new file mode 100644 index 0000000000..236f2468dc --- /dev/null +++ b/arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include "meson-g12-common-u-boot.dtsi" diff --git a/arch/arm/dts/meson-g12a-radxa-zero.dts b/arch/arm/dts/meson-g12a-radxa-zero.dts new file mode 100644 index 0000000000..e3bb6df42f --- /dev/null +++ b/arch/arm/dts/meson-g12a-radxa-zero.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "radxa,zero", "amlogic,g12a"; + model = "Radxa Zero"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + cvbs-connector { + status = "disabled"; + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + hdmi_pw: regulator-hdmi_pw { + compatible = "regulator-fixed"; + regulator-name = "HDMI_PW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "RADXA-ZERO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_pw>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "disabled"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +};
Add a defconfig for the Radxa Zero SBC, using an Amlogic S905Y2 chip.
Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- configs/radxa-zero_defconfig | 70 ++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 configs/radxa-zero_defconfig
diff --git a/configs/radxa-zero_defconfig b/configs/radxa-zero_defconfig new file mode 100644 index 0000000000..acd13f1c6b --- /dev/null +++ b/configs/radxa-zero_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-radxa-zero" +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" radxa-zero" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_MISC_INIT_R=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET_RANDOM_ETHADDR is not set +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +# CONFIG_PHY_REALTEK is not set +# CONFIG_DM_ETH is not set +CONFIG_DM_MDIO=y +CONFIG_DM_MDIO_MUX=y +# CONFIG_ETH_DESIGNWARE_MESON8B is not set +CONFIG_MDIO_MUX_MESON_G12A=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_OF_LIBFDT_OVERLAY=y
Add documentation bits for the Radxa Zero
Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/radxa-zero.rst | 74 ++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/radxa-zero.rst
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 2913ab281a..e2ab600f7f 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | Radxa Zero | GT-King/Pro | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 | | | | | | | | | BananaPi-M5 | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ @@ -96,6 +96,7 @@ Board Documentation p201 p212 q200 + radxa-zero s400 sei510 sei610 diff --git a/doc/board/amlogic/radxa-zero.rst b/doc/board/amlogic/radxa-zero.rst new file mode 100644 index 0000000000..423403f3c7 --- /dev/null +++ b/doc/board/amlogic/radxa-zero.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Radxa Zero +===================== + +Radxa Zero is a small form factor SBC based on the Amlogic S905Y2 +chipset that ships in a number of RAM/eMMC configurations: + +Boards with 512MB/1GB LPDDR4 RAM have no eMMC storage and BCM43436 +wireless (2.4GHz b/g/n) while 2GB/4GB boards have 8/16/32/64/128GB +eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac). + +- Amlogic S905Y2 quad-core Cortex-A53 +- Mali G31-MP2 GPU +- HDMI 2.1 output (micro) +- 1x USB 2.0 port - Type C (OTG) +- 1x USB 3.0 port - Type C (Host) +- 1x micro SD Card slot +- 40 Pin GPIO header + +Schematics are available on the manufacturer website: + +https://dl.radxa.com/zero/docs/hw/RADAX_ZERO_V13_SCH_20210309.pdf + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make radxa-zero_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +git trees published by the board vendor: + +.. code-block:: bash + + $ git clone -b radxa-zero-v2021.07 https://github.com/radxa/u-boot.git + $ git clone https://github.com/radxa/fip.git + + $ sudo apt-get install -y gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev + $ sudo apt-get install -y bc python dosfstools flex build-essential libssl-dev mtools + + $ wget https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/... + $ sudo tar xvf gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz -C /opt + + $ export CROSS_COMPILE=/opt/gcc-arm-10.2-2020.11-x86_64-aarch64-none-elf/bin/aarch64-none-elf- + $ export ARCH=arm + $ cd u-boot + $ make radxa-zero_defconfig + $ make + + $ cp u-boot.bin ../fip/radxa-zero/bl33.bin + $ cd ../fip/radxa-zero + $ make + +This will generate: + +.. code-block:: bash + + $ u-boot.bin u-boot.bin.sd.bin u-boot.bin.usb.bl2 u-boot.bin.usb.tpl + +Then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
On 15/09/2021 03:46, Christian Hewitt wrote:
This series alpha sorts the Amlogic Makefile, then adds support for the Radxa Zero SBC using the device-tree queued in the Amlogic maintainer tree for Linux 5.16.y
Patches are based on custodians/u-boot-amlogic-next
Christian Hewitt (4): ARM: dts: sort Amlogic Makefile section ARM: dts: add support for Radxa Zero boards: amlogic: add Radxa Zero defconfig doc: boards: amlogic: update for Radxa Zero
arch/arm/dts/Makefile | 12 +- .../arm/dts/meson-g12a-radxa-zero-u-boot.dtsi | 7 + arch/arm/dts/meson-g12a-radxa-zero.dts | 405 ++++++++++++++++++ configs/radxa-zero_defconfig | 70 +++ doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/radxa-zero.rst | 74 ++++ 6 files changed, 565 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/meson-g12a-radxa-zero-u-boot.dtsi create mode 100644 arch/arm/dts/meson-g12a-radxa-zero.dts create mode 100644 configs/radxa-zero_defconfig create mode 100644 doc/board/amlogic/radxa-zero.rst
Applied to u-boot-amlogic-next
Neil
participants (2)
-
Christian Hewitt -
Neil Armstrong