From: Mingming Lee Mingming.Lee@mediatek.com

Add MediaTek I2C basic driver

Signed-off-by: Mingming Lee Mingming.Lee@mediatek.com --- drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/mt_i2c.c | 619 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 629 insertions(+) create mode 100644 drivers/i2c/mt_i2c.c

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index dec6dc9..103688e 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -159,6 +159,15 @@ config SYS_I2C_MESON internal buffer holding up to 8 bytes for transfers and supports both 7-bit and 10-bit addresses.

+config SYS_I2C_MTK + bool "MediaTek I2C driver" + default n + help + This selects the MediaTek Integrated Inter Circuit bus driver. + The I2C bus adapter is the base for some other I2C client, eg: touch, sensors. + If you want to use MediaTek I2C interface, say Y here. + If unsure, say N. + config SYS_I2C_MXC bool "NXP MXC I2C driver" help diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index e851ec4..7227742 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o +obj-$(CONFIG_SYS_I2C_MTK) += mt_i2c.o obj-$(CONFIG_SYS_I2C_NEXELL) += nx_i2c.o obj-$(CONFIG_SYS_I2C_OCTEON) += octeon_i2c.o obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o diff --git a/drivers/i2c/mt_i2c.c b/drivers/i2c/mt_i2c.c new file mode 100644 index 0000000..5badde9 --- /dev/null +++ b/drivers/i2c/mt_i2c.c @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek I2C Interface driver + * + * Copyright (C) 2020 MediaTek Inc. + * Author: Mingming Lee Mingming.Lee@mediatek.com + */ + +#include <asm/cache.h> +#include <asm/io.h> +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <i2c.h> +#include <linux/delay.h> + +#define I2C_OK 0 +#define EINVAL_I2C 22 /* invalid argument */ +#define ETIMEDOUT_I2C 110 /* connection timed out */ +#define EACK_I2C 6 /* remote I/O error */ + +#define I2C_RS_TRANSFER BIT(4) +#define I2C_HS_NACKERR BIT(2) +#define I2C_ACKERR BIT(1) +#define I2C_TRANSAC_COMP BIT(0) +#define I2C_TRANSAC_START BIT(0) +#define I2C_RS_MUL_CNFG BIT(15) +#define I2C_RS_MUL_TRIG BIT(14) +#define I2C_DCM_DISABLE 0x0000 +#define I2C_IO_CONFIG_OPEN_DRAIN 0x0003 +#define I2C_IO_CONFIG_PUSH_PULL 0x0000 +#define I2C_SOFT_RST 0x0001 +#define I2C_FIFO_ADDR_CLR 0x0001 +#define I2C_DELAY_LEN 0x0002 +#define I2C_ST_START_CON 0x8001 +#define I2C_FS_START_CON 0x1800 +#define I2C_TIME_CLR_VALUE 0x0000 +#define I2C_TIME_DEFAULT_VALUE 0x0003 +#define I2C_WRRD_TRANAC_VALUE 0x0002 +#define I2C_RD_TRANAC_VALUE 0x0001 + +#define I2C_DMA_CON_TX 0x0000 +#define I2C_DMA_CON_RX 0x0001 +#define I2C_DMA_START_EN 0x0001 +#define I2C_DMA_INT_FLAG_NONE 0x0000 +#define I2C_DMA_CLR_FLAG 0x0000 +#define I2C_DMA_HARD_RST 0x0002 + +#define MAX_ST_MODE_SPEED 100000 +#define MAX_FS_MODE_SPEED 400000 +#define MAX_HS_MODE_SPEED 3400000 +#define MAX_SAMPLE_CNT_DIV 8 +#define MAX_STEP_CNT_DIV 64 +#define MAX_HS_STEP_CNT_DIV 8 +#define I2C_DEFAULT_CLK_DIV 4 + +#define MAX_I2C_ADDR 0x7F +#define MAX_I2C_LEN 0xFF +#define TRANS_ADDR_ONLY BIT(8) +#define TRANSFER_TIMEOUT 50000 /* us */ +#define I2C_FIFO_STAT1_MASK 0x001F +#define TIMING_SAMPLE_OFFSET 8 +#define HS_SAMPLE_OFFSET 12 +#define HS_STEP_OFFSET 8 + +#define I2C_CONTROL_WRAPPER BIT(0) +#define I2C_CONTROL_RS BIT(1) +#define I2C_CONTROL_DMA_EN BIT(2) +#define I2C_CONTROL_CLK_EXT_EN BIT(3) +#define I2C_CONTROL_DIR_CHANGE BIT(4) +#define I2C_CONTROL_ACKERR_DET_EN BIT(5) +#define I2C_CONTROL_TRANSFER_LEN_CHANGE BIT(6) +#define I2C_CONTROL_DMAACK BIT(8) +#define I2C_CONTROL_ASYNC BIT(9) + +enum I2C_REGS_OFFSET { + OFFSET_PORT = 0x0, + OFFSET_SLAVE_ADDR = 0x04, + OFFSET_INTR_MASK = 0x08, + OFFSET_INTR_STAT = 0x0C, + OFFSET_CONTROL = 0x10, + OFFSET_TRANSFER_LEN = 0x14, + OFFSET_TRANSAC_LEN = 0x18, + OFFSET_DELAY_LEN = 0x1C, + OFFSET_TIMING = 0x20, + OFFSET_START = 0x24, + OFFSET_EXT_CONF = 0x28, + OFFSET_FIFO_STAT1 = 0x2C, + OFFSET_FIFO_STAT = 0x30, + OFFSET_FIFO_THRESH = 0x34, + OFFSET_FIFO_ADDR_CLR = 0x38, + OFFSET_IO_CONFIG = 0x40, + OFFSET_RSV_DEBUG = 0x44, + OFFSET_HS = 0x48, + OFFSET_SOFTRESET = 0x50, + OFFSET_DCM_EN = 0x54, + OFFSET_DEBUGSTAT = 0x64, + OFFSET_DEBUGCTRL = 0x68, + OFFSET_TRANSFER_LEN_AUX = 0x6C, + OFFSET_CLOCK_DIV = 0x70, + OFFSET_SCL_HL_RATIO = 0x74, + OFFSET_SCL_HS_HL_RATIO = 0x78, + OFFSET_SCL_MIS_COMP_POINT = 0x7C, + OFFSET_STA_STOP_AC_TIME = 0x80, + OFFSET_HS_STA_STOP_AC_TIME = 0x84, + OFFSET_DATA_TIME = 0x88, +}; + +enum DMA_REGS_OFFSET { + OFFSET_INT_FLAG = 0x0, + OFFSET_INT_EN = 0x04, + OFFSET_EN = 0x08, + OFFSET_RST = 0x0C, + OFFSET_CON = 0x18, + OFFSET_TX_MEM_ADDR = 0x1C, + OFFSET_RX_MEM_ADDR = 0x20, + OFFSET_TX_LEN = 0x24, + OFFSET_RX_LEN = 0x28, +}; + +enum mtk_trans_op { + I2C_MASTER_WR = 1, + I2C_MASTER_RD, + I2C_MASTER_WRRD, +}; + +struct mtk_i2c_soc_data { + u8 dma_sync: 1; +}; + +struct mtk_i2c_priv { + /* set in i2c probe */ + void __iomem *base; /* i2c base addr */ + void __iomem *pdmabase; /* dma base address*/ + struct clk clk_main; /* main clock for i2c bus */ + struct clk clk_dma; /* DMA clock for i2c via DMA */ + const struct mtk_i2c_soc_data *soc_data; + enum mtk_trans_op op; + bool zero_len; + bool pushpull; /* open drain */ + bool filter_msg; /* filter msg error log */ + bool auto_restart; + bool ignore_restart_irq; + u32 speed; /* hz */ + u8 *tx_buff; + u8 *rx_buff; +}; + +static inline void i2c_writel(struct mtk_i2c_priv *priv, u8 offset, u32 value) +{ + writel(value, (priv->base + offset)); +} + +static inline u32 i2c_readl(struct mtk_i2c_priv *priv, u8 offset) +{ + return readl(priv->base + offset); +} + +static void mtk_i2c_clk_enable(struct mtk_i2c_priv *priv) +{ + clk_enable(&priv->clk_main); + clk_enable(&priv->clk_dma); +} + +static void mtk_i2c_clk_disable(struct mtk_i2c_priv *priv) +{ + clk_disable(&priv->clk_dma); + clk_disable(&priv->clk_main); +} + +static void mtk_i2c_init_hw(struct mtk_i2c_priv *priv) +{ + u16 control_reg; + + writel(I2C_DMA_HARD_RST, priv->pdmabase + OFFSET_RST); + writel(I2C_DMA_CLR_FLAG, priv->pdmabase + OFFSET_RST); + i2c_writel(priv, OFFSET_SOFTRESET, I2C_SOFT_RST); + /* set ioconfig */ + if (priv->pushpull) + i2c_writel(priv, OFFSET_IO_CONFIG, I2C_IO_CONFIG_PUSH_PULL); + else + i2c_writel(priv, OFFSET_IO_CONFIG, I2C_IO_CONFIG_OPEN_DRAIN); + + i2c_writel(priv, OFFSET_DCM_EN, I2C_DCM_DISABLE); + control_reg = I2C_CONTROL_ACKERR_DET_EN | I2C_CONTROL_CLK_EXT_EN; + if (priv->soc_data->dma_sync) + control_reg |= I2C_CONTROL_DMAACK | I2C_CONTROL_ASYNC; + i2c_writel(priv, OFFSET_CONTROL, control_reg); + i2c_writel(priv, OFFSET_DELAY_LEN, I2C_DELAY_LEN); +} + +static int mtk_i2c_calculate_speed(struct mtk_i2c_priv *priv, + u32 clk_src, + u32 target_speed, + u32 *timing_step_cnt, + u32 *timing_sample_cnt) +{ + u32 step_cnt; + u32 sample_cnt; + u32 max_step_cnt; + u32 base_sample_cnt = MAX_SAMPLE_CNT_DIV; + u32 base_step_cnt; + u32 opt_div; + u32 best_mul; + u32 cnt_mul; + + if (target_speed > MAX_HS_MODE_SPEED) + target_speed = MAX_HS_MODE_SPEED; + + if (target_speed > MAX_FS_MODE_SPEED) + max_step_cnt = MAX_HS_STEP_CNT_DIV; + else + max_step_cnt = MAX_STEP_CNT_DIV; + + base_step_cnt = max_step_cnt; + /* Find the best combination */ + opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed); + best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt; + + /* Search for the best pair (sample_cnt, step_cnt) with + * 0 < sample_cnt < MAX_SAMPLE_CNT_DIV + * 0 < step_cnt < max_step_cnt + * sample_cnt * step_cnt >= opt_div + * optimizing for sample_cnt * step_cnt being minimal + */ + for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) { + step_cnt = DIV_ROUND_UP(opt_div, sample_cnt); + cnt_mul = step_cnt * sample_cnt; + if (step_cnt > max_step_cnt) + continue; + + if (cnt_mul < best_mul) { + best_mul = cnt_mul; + base_sample_cnt = sample_cnt; + base_step_cnt = step_cnt; + if (best_mul == opt_div) + break; + } + } + + sample_cnt = base_sample_cnt; + step_cnt = base_step_cnt; + + if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) { + /* In this case, hardware can't support such + * low i2c_bus_freq + */ + debug("Unsupported speed(%uhz)\n", target_speed); + return -EINVAL; + } + + *timing_step_cnt = step_cnt - 1; + *timing_sample_cnt = sample_cnt - 1; + return 0; +} + +static int mtk_i2c_set_speed(struct udevice *dev, uint speed) +{ + u32 clk_src; + u32 step_cnt; + u32 sample_cnt; + u16 timing_reg; + u16 high_speed_reg; + int ret = 0; + struct mtk_i2c_priv *priv = dev_get_priv(dev); + + priv->speed = speed; + mtk_i2c_clk_enable(priv); + clk_src = clk_get_rate(&priv->clk_main) / + I2C_DEFAULT_CLK_DIV; + i2c_writel(priv, OFFSET_CLOCK_DIV, (I2C_DEFAULT_CLK_DIV - 1)); + if (priv->speed > MAX_FS_MODE_SPEED) { + /* Set master code speed register */ + ret = mtk_i2c_calculate_speed(priv, clk_src, MAX_FS_MODE_SPEED, + &step_cnt, &sample_cnt); + if (ret < 0) + goto exit; + + timing_reg = (sample_cnt << TIMING_SAMPLE_OFFSET) | step_cnt; + writel(timing_reg, priv->base + OFFSET_TIMING); + /* Set the high speed mode register */ + ret = mtk_i2c_calculate_speed(priv, clk_src, priv->speed, + &step_cnt, &sample_cnt); + if (ret < 0) + goto exit; + + high_speed_reg = I2C_TIME_DEFAULT_VALUE | + (sample_cnt << HS_SAMPLE_OFFSET) | + (step_cnt << HS_STEP_OFFSET); + writel(high_speed_reg, priv->base + OFFSET_HS); + } else { + ret = mtk_i2c_calculate_speed(priv, clk_src, priv->speed, + &step_cnt, &sample_cnt); + if (ret < 0) + goto exit; + + timing_reg = (sample_cnt << TIMING_SAMPLE_OFFSET) | step_cnt; + /* Disable the high speed transaction */ + high_speed_reg = I2C_TIME_CLR_VALUE; + writel(timing_reg, priv->base + OFFSET_TIMING); + writel(high_speed_reg, priv->base + OFFSET_HS); + } +exit: + mtk_i2c_clk_disable(priv); + return ret; +} + +static int mtk_i2c_do_transfer(struct mtk_i2c_priv *priv, + struct i2c_msg *msgs, + int num, int left_num) +{ + u16 addr_reg; + u16 start_reg; + u16 control_reg; + u16 restart_flag = 0; + u16 irq_stat = 0; + u8 trans_error = 0; + bool tmo = false; + u8 *ptr = msgs->buf; + u16 data_size = msgs->len; + u32 tmo_poll = 0; + int ret; + + if (priv->auto_restart) + restart_flag = I2C_RS_TRANSFER; + + control_reg = i2c_readl(priv, OFFSET_CONTROL) & + ~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS); + + if (priv->speed > MAX_FS_MODE_SPEED || num > 1) + control_reg |= I2C_CONTROL_RS; + + if (priv->op == I2C_MASTER_WRRD) + control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS; + control_reg |= I2C_CONTROL_DMA_EN; + i2c_writel(priv, OFFSET_CONTROL, control_reg); + + /* set start condition */ + if (priv->speed <= MAX_ST_MODE_SPEED) + i2c_writel(priv, OFFSET_EXT_CONF, I2C_ST_START_CON); + else + i2c_writel(priv, OFFSET_EXT_CONF, I2C_FS_START_CON); + + addr_reg = msgs->addr << 1; + if (priv->op == I2C_MASTER_RD) + addr_reg |= I2C_M_RD; + if (priv->zero_len) + i2c_writel(priv, OFFSET_SLAVE_ADDR, addr_reg | TRANS_ADDR_ONLY); + else + i2c_writel(priv, OFFSET_SLAVE_ADDR, addr_reg); + + /* clear interrupt status */ + i2c_writel(priv, OFFSET_INTR_STAT, restart_flag | I2C_HS_NACKERR | + I2C_ACKERR | I2C_TRANSAC_COMP); + i2c_writel(priv, OFFSET_FIFO_ADDR_CLR, I2C_FIFO_ADDR_CLR); + + /* enable interrupt */ + i2c_writel(priv, OFFSET_INTR_MASK, restart_flag | I2C_HS_NACKERR | + I2C_ACKERR | I2C_TRANSAC_COMP); + + /* set transfer and transaction len */ + if (priv->op == I2C_MASTER_WRRD) { + i2c_writel(priv, OFFSET_TRANSFER_LEN, msgs->len); + i2c_writel(priv, OFFSET_TRANSFER_LEN_AUX, + (msgs + 1)->len); + i2c_writel(priv, OFFSET_TRANSAC_LEN, I2C_WRRD_TRANAC_VALUE); + } else { + i2c_writel(priv, OFFSET_TRANSFER_LEN, msgs->len); + i2c_writel(priv, OFFSET_TRANSAC_LEN, num); + } + + /* prepare buffer data to start transfer */ + if (priv->op == I2C_MASTER_RD) { + writel(I2C_DMA_INT_FLAG_NONE, priv->pdmabase + + OFFSET_INT_FLAG); + writel(I2C_DMA_CON_RX, priv->pdmabase + OFFSET_CON); + priv->rx_buff = (u8 *)noncached_alloc(msgs->len, + ARCH_DMA_MINALIGN); + writel((u32)priv->rx_buff, priv->pdmabase + + OFFSET_RX_MEM_ADDR); + writel(msgs->len, priv->pdmabase + OFFSET_RX_LEN); + } else if (priv->op == I2C_MASTER_WR) { + writel(I2C_DMA_INT_FLAG_NONE, priv->pdmabase + + OFFSET_INT_FLAG); + writel(I2C_DMA_CON_TX, priv->pdmabase + OFFSET_CON); + priv->tx_buff = (u8 *)noncached_alloc(msgs->len, + ARCH_DMA_MINALIGN); + memcpy(priv->tx_buff, msgs->buf, msgs->len); + writel((u32)priv->tx_buff, priv->pdmabase + + OFFSET_TX_MEM_ADDR); + writel(msgs->len, priv->pdmabase + OFFSET_TX_LEN); + } else { + writel(I2C_DMA_CLR_FLAG, priv->pdmabase + + OFFSET_INT_FLAG); + writel(I2C_DMA_CLR_FLAG, priv->pdmabase + OFFSET_CON); + priv->tx_buff = (u8 *)noncached_alloc(msgs->len, + ARCH_DMA_MINALIGN); + priv->rx_buff = (u8 *)noncached_alloc((msgs + 1)->len, + ARCH_DMA_MINALIGN); + memcpy(priv->tx_buff, msgs->buf, msgs->len); + writel((u32)priv->tx_buff, priv->pdmabase + + OFFSET_TX_MEM_ADDR); + writel((u32)priv->rx_buff, priv->pdmabase + + OFFSET_RX_MEM_ADDR); + writel(msgs->len, priv->pdmabase + OFFSET_TX_LEN); + writel((msgs + 1)->len, priv->pdmabase + + OFFSET_RX_LEN); + } + writel(I2C_DMA_START_EN, priv->pdmabase + OFFSET_EN); + + if (!priv->auto_restart) { + start_reg = I2C_TRANSAC_START; + } else { + start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG; + if (left_num >= 1) + start_reg |= I2C_RS_MUL_CNFG; + } + i2c_writel(priv, OFFSET_START, start_reg); + + for (;;) { + irq_stat = i2c_readl(priv, OFFSET_INTR_STAT); + + /* ignore the first restart irq after the master code */ + if (priv->ignore_restart_irq && (irq_stat | restart_flag)) { + priv->ignore_restart_irq = false; + irq_stat = 0; + writel(I2C_RS_MUL_CNFG | I2C_RS_MUL_TRIG | + I2C_TRANSAC_START, priv->base + OFFSET_START); + } + + if (irq_stat & (I2C_TRANSAC_COMP | restart_flag)) { + tmo = false; + if (irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) + trans_error = 1; + + break; + } + udelay(1); + if (tmo_poll++ >= TRANSFER_TIMEOUT) { + tmo = true; + break; + } + } + /* clear interrupt mask */ + i2c_writel(priv, OFFSET_INTR_MASK, ~(restart_flag | I2C_HS_NACKERR | + I2C_ACKERR | I2C_TRANSAC_COMP)); + + if (!tmo && trans_error == 0) { + /* transfer success ,we need to get data from fifo */ + if (priv->op == I2C_MASTER_RD || priv->op == I2C_MASTER_WRRD) { + ptr = priv->op == I2C_MASTER_RD ? + msgs->buf : (msgs + 1)->buf; + data_size = priv->op == I2C_MASTER_RD ? + msgs->len : (msgs + 1)->len; + memcpy(ptr, priv->rx_buff, data_size); + } + } else { + /* timeout or ACKERR */ + if (tmo) { + ret = -ETIMEDOUT_I2C; + if (!priv->filter_msg) + debug("transfer timeout! addr: 0x%x,\n", + msgs->addr); + } else { + ret = -EACK_I2C; + if (!priv->filter_msg) + debug("ACKERR! addr: 0x%x,IRQ:0x%x\n", + msgs->addr, irq_stat); + } + mtk_i2c_init_hw(priv); + return ret; + } + return 0; +} + +static int mtk_i2c_transfer(struct udevice *dev, struct i2c_msg *msg, + int nmsgs) +{ + int ret; + int left_num; + u8 num_cnt; + struct mtk_i2c_priv *priv = dev_get_priv(dev); + + priv->auto_restart = true; + left_num = nmsgs; + mtk_i2c_clk_enable(priv); + for (num_cnt = 0; num_cnt < nmsgs; num_cnt++) { + if (((msg + num_cnt)->addr) > MAX_I2C_ADDR) { + ret = -EINVAL_I2C; + goto err_exit; + } + if ((msg + num_cnt)->len > MAX_I2C_LEN) { + ret = -EINVAL_I2C; + goto err_exit; + } + } + + /* checking if we can skip restart and optimize using WRRD mode */ + if (priv->auto_restart && nmsgs == 2) { + if (!(msg[0].flags & I2C_M_RD) && (msg[1].flags & I2C_M_RD) && + msg[0].addr == msg[1].addr) { + priv->auto_restart = false; + } + } + + if (priv->auto_restart && nmsgs >= 2 && priv->speed > MAX_FS_MODE_SPEED) + /* ignore the first restart irq after the master code, + * otherwise the first transfer will be discarded. + */ + priv->ignore_restart_irq = true; + else + priv->ignore_restart_irq = false; + + while (left_num--) { + /*priv->zero_len = true + *transfer slave address only to support devices detect + */ + if (!msg->buf) + priv->zero_len = true; + else + priv->zero_len = false; + + if (msg->flags & I2C_M_RD) + priv->op = I2C_MASTER_RD; + else + priv->op = I2C_MASTER_WR; + + if (!priv->auto_restart) { + if (nmsgs > 1) { + /* combined two messages into one transaction */ + priv->op = I2C_MASTER_WRRD; + left_num--; + } + } + ret = mtk_i2c_do_transfer(priv, msg, nmsgs, left_num); + if (ret < 0) + goto err_exit; + msg++; + } + ret = I2C_OK; + +err_exit: + mtk_i2c_clk_disable(priv); + return ret; +} + +static int mtk_i2c_ofdata_to_platdata(struct udevice *dev) +{ + int ret; + struct mtk_i2c_priv *priv = dev_get_priv(dev); + + priv->base = dev_remap_addr_index(dev, 0); + priv->pdmabase = dev_remap_addr_index(dev, 1); + ret = clk_get_by_index(dev, 0, &priv->clk_main); + if (ret) + return ret; + + ret = clk_get_by_index(dev, 1, &priv->clk_dma); + + return ret; +} + +static int mtk_i2c_probe(struct udevice *dev) +{ + struct mtk_i2c_priv *priv = dev_get_priv(dev); + + priv->soc_data = (struct mtk_i2c_soc_data *)dev_get_driver_data(dev); + mtk_i2c_clk_enable(priv); + mtk_i2c_init_hw(priv); + mtk_i2c_clk_disable(priv); + return 0; +} + +static int mtk_i2c_deblock(struct udevice *dev) +{ + struct mtk_i2c_priv *priv = dev_get_priv(dev); + + mtk_i2c_clk_enable(priv); + mtk_i2c_init_hw(priv); + mtk_i2c_clk_disable(priv); + return 0; +} + +static const struct mtk_i2c_soc_data mt8518_soc_data = { + .dma_sync = 0, +}; + +static const struct mtk_i2c_soc_data mt8512_soc_data = { + .dma_sync = 1, +}; + +static const struct dm_i2c_ops mtk_i2c_ops = { + .xfer = mtk_i2c_transfer, + .set_bus_speed = mtk_i2c_set_speed, + .deblock = mtk_i2c_deblock, +}; + +static const struct udevice_id mtk_i2c_ids[] = { + { + .compatible = "mediatek,mt8518-i2c", + .data = (ulong)&mt8518_soc_data, + }, + { + .compatible = "mediatek,mt8512-i2c", + .data = (ulong)&mt8512_soc_data, + }, + { + } +}; + +U_BOOT_DRIVER(mtk_i2c) = { + .name = "mtk_i2c", + .id = UCLASS_I2C, + .of_match = mtk_i2c_ids, + .ofdata_to_platdata = mtk_i2c_ofdata_to_platdata, + .probe = mtk_i2c_probe, + .priv_auto_alloc_size = sizeof(struct mtk_i2c_priv), + .ops = &mtk_i2c_ops, +};