Hi, on my STB I've a problem related to the environment variables, they seem corrupted and I'm not able to restore it. Can you help me? Here the output of the printenv/saveenv cmds trying to save a new variable:

PDK7105> printenv ---> A LOT OF 0xFFFFFFFF <--- stdin=serial stdout=serial stderr=serial bootargs=console=ttyAS0,115200 rw ramdisk_size=6144 root=/dev/ram0 init=/linuxrc nwhwconf=device:eth0,hwaddr:00:001111 ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255. 0.0:Spark:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=7000 Environment size: 2406/131068 bytes PDK7105> saveenv Saving Environment to SPI Serial Flash... Board: STx7105-PDK [32-bit mode] U-Boot 1.3.1 (Jun 19 2012 - 1744) - stm23_0051 - YW_1.1.005 overclock DRAM: 256 MiB Panel: VFD NAND: Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 512 MiB SPI: ERROR: Unknown SPI Device detected, devid = 0x01, 0x02, 0x14 ERROR: Offset out of range (max=0xffffffff) In: serial Out: serial Err: serial Ident ic exist Ident ic get stb id IdentID : 0c 00 0a 00 00 09 6e PDK7105> printenv ---> A LOT OF 0xFFFFFFFF <--- stdin=serial stdout=serial stderr=serial Environment size: 2150/131068 bytes PDK7105>

BR, Paolo