[U-Boot] MPC8360ERDK and DP83848
The MPC8360ERDK from Freescale has both Broadcom 5481 and National DP83848 ethernet interfaces. However the U-Boot supplied with the RDK only supports the Broadcom 5481. Has anybody got the National DP83848 interface working for U-Boot on this RDK? In the U-Boot archives I can only find references to the DP83848 driver for the A91RM9200 board.
Thanks, Jon
-- Jon Gadsden Embedded Software Engineer, Vital Platforms Centre of Excellence Invensys Rail (UK), Chippenham Telephone: +44 (0) 1249 441407 email: Jon.Gadsden@invensysrail.com
Any files attached to this e-mail will have been checked with virus detection software prior to transmission but you should carry out your own virus check before opening any attachment. Invensys Rail does not accept liability for any damage or loss which may be caused by software viruses. This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged.
This email is from the Invensys Rail Limited business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within Invensys Rail business group, please click here
If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@invensys.com
This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).
Hello Jon,
Jon.Gadsden@invensysrail.com wrote:
The MPC8360ERDK from Freescale has both Broadcom 5481 and National DP83848 ethernet interfaces. However the U-Boot supplied with the RDK only supports the Broadcom 5481. Has anybody got the National DP83848 interface working for U-Boot on this RDK? In the U-Boot archives I can only find references to the DP83848 driver for the A91RM9200 board.
The UEC driver has support for a generic PHY. It might 'just work'.
Thanks, Jon
-- Jon Gadsden Embedded Software Engineer, Vital Platforms Centre of Excellence Invensys Rail (UK), Chippenham Telephone: +44 (0) 1249 441407 email: Jon.Gadsden@invensysrail.com
Any files attached to this e-mail will have been checked with virus detection software prior to transmission but you should carry out your own virus check before opening any attachment. Invensys Rail does not accept liability for any damage or loss which may be caused by software viruses. This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged.
This email is from the Invensys Rail Limited business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within Invensys Rail business group, please click here
If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@invensys.com
This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates).
If you can strip this crap from your messages you'll make more friends
regards, Ben
participants (2)
-
Ben Warren -
Jon.Gadsden＠invensysrail.com