[PATCH V2] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim. The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE is enabled, the u-boot.bin does not contain control DT for U-Boot, and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx does not contain the DT, and a system where u-boot-with-spl.imx is written to offset 1024B to the start of storage no longer boots, as it is missing DT.
In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.
Tested-by: Fabio Estevam festevam@gmail.com Signed-off-by: Marek Vasut marex@denx.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Simon Glass sjg@chromium.org Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com --- V2: Swap the u-boot.uim <-> u-boot.img in the conditional so this would match the patch which Fabio originally tested --- arch/arm/mach-imx/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
-u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat)
-u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat)
quiet_cmd_u-boot-nand-spl_imx = GEN $@
From: Marek Vasut marex@denx.de Sent: Monday, February 1, 2021 9:07 PM
The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim. The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE is enabled, the u-boot.bin does not contain control DT for U-Boot, and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx does not contain the DT, and a system where u-boot-with-spl.imx is written to offset 1024B to the start of storage no longer boots, as it is missing DT.
In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.
Tested-by: Fabio Estevam festevam@gmail.com Signed-off-by: Marek Vasut marex@denx.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Simon Glass sjg@chromium.org Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com
V2: Swap the u-boot.uim <-> u-boot.img in the conditional so this would match the patch which Fabio originally tested
arch/arm/mach-imx/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
-u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u- boot.uim) FORCE $(call if_changed,pad_cat)
-u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat)
quiet_cmd_u-boot-nand-spl_imx = GEN $@
2.29.2
Tested-by: Christoph Niedermaier cniedermaier@dh-electronics.com
Best regards Christoph
Hi Marek,
On 01.02.21 21:07, Marek Vasut wrote:
The u-boot-with-spl.imx is a concatenation of SPL and u-boot.uim. The u-boot.uim is u-boot.bin wrapped in uImage. In case OF_SEPARATE is enabled, the u-boot.bin does not contain control DT for U-Boot, and so u-boot.uim does not contain the DT, and so u-boot-with-spl.imx does not contain the DT, and a system where u-boot-with-spl.imx is written to offset 1024B to the start of storage no longer boots, as it is missing DT.
In case OF_SEPARATE is enabled, u-boot.img contains both u-boot.bin and the necessary DTs. Therefore, use u-boot.img instead of u-boot.uim to generate u-boot-with-spl.imx when OF_SEPARATE is enabled.
Tested-by: Fabio Estevam festevam@gmail.com Signed-off-by: Marek Vasut marex@denx.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Simon Glass sjg@chromium.org Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com
V2: Swap the u-boot.uim <-> u-boot.img in the conditional so this would match the patch which Fabio originally tested
arch/arm/mach-imx/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
-u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat)
-u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat)
quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
Thanks, Stefano
Thanks, Stefano
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Regards, Stefano
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Regards, Stefano
On 3/1/21 2:44 PM, Stefano Babic wrote:
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
All right, V4 is out, please give it a try.
On Mon, Mar 01, 2021 at 02:44:13PM +0100, Stefano Babic wrote:
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Please note that ot1200 has today been ack'd for removal and udoo is on the removal list: https://patchwork.ozlabs.org/project/uboot/patch/20210221010634.21310-24-tri...
On 3/1/21 6:56 PM, Tom Rini wrote:
[...]
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Please note that ot1200 has today been ack'd for removal and udoo is on the removal list: https://patchwork.ozlabs.org/project/uboot/patch/20210221010634.21310-24-tri...
That's sad. Anyway, this patch was buggy, it should be fixed in V4.
On Mon, Mar 1, 2021 at 5:57 PM Tom Rini trini@konsulko.com wrote:
On Mon, Mar 01, 2021 at 02:44:13PM +0100, Stefano Babic wrote:
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 1aa26a50ad8..e6b4654cd35 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ -u-boot-with-spl.imx: SPL u-boot.uim FORCE +u-boot-with-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE $(call if_changed,pad_cat) quiet_cmd_u-boot-nand-spl_imx = GEN $@
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Please note that ot1200 has today been ack'd for removal and udoo is on the removal list:
FYI I am working to update the udoo and the udoo_neo so they're not removed as we support those boards in Fedora, I've still working my way through it with my schedule.
On Mon, Mar 01, 2021 at 07:28:17PM +0000, Peter Robinson wrote:
On Mon, Mar 1, 2021 at 5:57 PM Tom Rini trini@konsulko.com wrote:
On Mon, Mar 01, 2021 at 02:44:13PM +0100, Stefano Babic wrote:
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote:
Hi Marek,
Hi,
[...]
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 1aa26a50ad8..e6b4654cd35 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ > quiet_cmd_pad_cat = CAT $@ > cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ > -u-boot-with-spl.imx: SPL u-boot.uim FORCE > +u-boot-with-spl.imx: SPL $(if > $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE > $(call if_changed,pad_cat) > -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE > +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if > $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE > $(call if_changed,pad_cat) > quiet_cmd_u-boot-nand-spl_imx = GEN $@ >
This patch breaks build for two boards, udoo and ot1200_spl. Strange enough, I get weird results with git bisect (but definetely this is the only patch I am applying that cause the issue).
Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Please note that ot1200 has today been ack'd for removal and udoo is on the removal list:
FYI I am working to update the udoo and the udoo_neo so they're not removed as we support those boards in Fedora, I've still working my way through it with my schedule.
Please find time soon. I'm spelling this out more in my -rc email (which has been delayed in that I expect an imx PR and so I want to get that, then release) but I will be dropping stuff post v2021.04 release. Thanks!
On Mon, Mar 1, 2021 at 7:42 PM Tom Rini trini@konsulko.com wrote:
On Mon, Mar 01, 2021 at 07:28:17PM +0000, Peter Robinson wrote:
On Mon, Mar 1, 2021 at 5:57 PM Tom Rini trini@konsulko.com wrote:
On Mon, Mar 01, 2021 at 02:44:13PM +0100, Stefano Babic wrote:
On 01.03.21 14:40, Stefano Babic wrote:
On 01.03.21 14:36, Marek Vasut wrote:
On 3/1/21 10:27 AM, Stefano Babic wrote: > Hi Marek,
Hi,
[...]
> > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > > index 1aa26a50ad8..e6b4654cd35 100644 > > --- a/arch/arm/mach-imx/Makefile > > +++ b/arch/arm/mach-imx/Makefile > > @@ -202,10 +202,10 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@ > > quiet_cmd_pad_cat = CAT $@ > > cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ > > -u-boot-with-spl.imx: SPL u-boot.uim FORCE > > +u-boot-with-spl.imx: SPL $(if > > $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE > > $(call if_changed,pad_cat) > > -u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx u-boot.uim FORCE > > +u-boot-with-nand-spl.imx: spl/u-boot-nand-spl.imx $(if > > $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE > > $(call if_changed,pad_cat) > > quiet_cmd_u-boot-nand-spl_imx = GEN $@ > > > > This patch breaks build for two boards, udoo and ot1200_spl. > Strange enough, I get weird results with git bisect (but > definetely this is the only patch I am applying that cause the > issue). > > Could you take a look, please ?
There is V3 already, does that work? [PATCH V3] ARM: imx: Include u-boot.img in u-boot-with-spl.imx if OF_SEPARATE=y
I pick it up and let you know, thanks.
Sorry, I answered to V2 thread, but I had already picked up V3, and this causes the issue with udoo and ot1200_spl.
Please note that ot1200 has today been ack'd for removal and udoo is on the removal list:
FYI I am working to update the udoo and the udoo_neo so they're not removed as we support those boards in Fedora, I've still working my way through it with my schedule.
Please find time soon. I'm spelling this out more in my -rc email (which has been delayed in that I expect an imx PR and so I want to get that, then release) but I will be dropping stuff post v2021.04 release.
I was planning on having patches in time for the next merge window.
participants (5)
-
Christoph Niedermaier -
Marek Vasut -
Peter Robinson -
Stefano Babic -
Tom Rini