Dear Tom,

Could you pull these patches into u-boot/master?

The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:

ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300)

are available in the git repository at:

git://git.denx.de/u-boot-mmc.git master

for you to fetch changes up to 7dde50d70787eb2faeced82d0c025762b12363ea:

mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. (2017-04-14 15:23:14 +0900)

---------------------------------------------------------------- Alex Deymo (1): mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring.

Carlo Caione (1): mmc: meson: add MMC driver for Meson GX (S905)

Heiner Kallweit (2): arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version odroid-c2: enable new Meson GX MMC driver in board defconfig

Jocelyn Bohr (1): mmc: bcm2835_sdhci: Speed up mmc writes.

Wenyou Yang (1): mmc: gen_atmel_mci: add driver model support for mci

arch/arm/dts/meson-gx.dtsi | 447 +++++++++++++++++++ arch/arm/dts/meson-gxbb-odroidc2.dts | 147 +++++- arch/arm/dts/meson-gxbb.dtsi | 718 ++++++++++++++++++------------ arch/arm/include/asm/arch-meson/sd_emmc.h | 89 ++++ configs/odroid-c2_defconfig | 5 +- drivers/mmc/Kconfig | 15 + drivers/mmc/Makefile | 1 + drivers/mmc/bcm2835_sdhci.c | 8 +- drivers/mmc/gen_atmel_mci.c | 158 ++++++- drivers/mmc/meson_gx_mmc.c | 291 ++++++++++++ drivers/mmc/sdhci.c | 15 +- include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++ include/dt-bindings/clock/gxbb-clkc.h | 34 ++ include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++ 14 files changed, 1777 insertions(+), 283 deletions(-) create mode 100644 arch/arm/dts/meson-gx.dtsi create mode 100644 arch/arm/include/asm/arch-meson/sd_emmc.h create mode 100644 drivers/mmc/meson_gx_mmc.c create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h create mode 100644 include/dt-bindings/clock/gxbb-clkc.h create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h

Best Regards, Jaehoon Chung