The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480 in the Fusemap Description Table in the reference manual. Return this value as well as min/max temperature based on the value.

Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the their Fusemap Description Table however Freescale has confirmed that these eFUSE bits match the description within the IMX6DQRM and that they will be added to the next revision of the respective reference manuals.

This has been tested with IMX6 Automative and Industrial parts.

Signed-off-by: Tim Harvey tharvey@gateworks.com --- v2: - split out adding get_cpu_temp_grade to its own patch - added note about support of MX6SDL and MX6SX

Signed-off-by: Tim Harvey tharvey@gateworks.com --- arch/arm/cpu/armv7/mx6/soc.c | 38 +++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 1 + include/imx_thermal.h | 6 +++++ 3 files changed, 45 insertions(+)

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 71fa1fb..6f501ac 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -124,6 +124,44 @@ u32 get_cpu_speed_grade_hz(void) return 0; }

+/* + * OCOTP_MEM0[7:6] (see Fusemap Description Table offset 0x480) + * defines a 2-bit Temperature Grade + * + * return temperature grade and min/max temperature in celcius + */ +#define OCOTP_MEM0_TEMP_SHIFT 6 + +u32 get_cpu_temp_grade(int *minc, int *maxc) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[1]; + struct fuse_bank1_regs *fuse = + (struct fuse_bank1_regs *)bank->fuse_regs; + uint32_t val; + + val = readl(&fuse->mem0); + val >>= OCOTP_MEM0_TEMP_SHIFT; + val &= 0x3; + + if (minc && maxc) { + if (val == TEMP_AUTOMOTIVE) { + *minc = -40; + *maxc = 125; + } else if (val == TEMP_INDUSTRIAL) { + *minc = -40; + *maxc = 105; + } else if (val == TEMP_EXTCOMMERCIAL) { + *minc = -20; + *maxc = 105; + } else { + *minc = 0; + *maxc = 95; + } + } + return val; +} + #ifdef CONFIG_REVISION_TAG u32 __weak get_board_rev(void) { diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index a2cd0a9..c583291 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -17,6 +17,7 @@ u32 get_nr_cpus(void); u32 get_cpu_rev(void); u32 get_cpu_speed_grade_hz(void); +u32 get_cpu_temp_grade(int *minc, int *maxc);

/* returns MXC_CPU_ value */ #define cpu_type(rev) (((rev) >> 12)&0xff) diff --git a/include/imx_thermal.h b/include/imx_thermal.h index be13652..8ce333c 100644 --- a/include/imx_thermal.h +++ b/include/imx_thermal.h @@ -8,6 +8,12 @@ #ifndef _IMX_THERMAL_H_ #define _IMX_THERMAL_H_

+/* CPU Temperature Grades */ +#define TEMP_COMMERCIAL 0 +#define TEMP_EXTCOMMERCIAL 1 +#define TEMP_INDUSTRIAL 2 +#define TEMP_AUTOMOTIVE 3 + struct imx_thermal_plat { void *regs; int fuse_bank;

Replace the hard-coded values for min/max/passive with values derived from the CPU temperature grade.

Signed-off-by: Tim Harvey tharvey@gateworks.com --- drivers/thermal/imx_thermal.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 0bd9cfd..b5dab63 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -12,15 +12,13 @@ #include <fuse.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> #include <dm.h> #include <errno.h> #include <malloc.h> #include <thermal.h> #include <imx_thermal.h>

-#define TEMPERATURE_MIN -40 -#define TEMPERATURE_HOT 80 -#define TEMPERATURE_MAX 125 #define FACTOR0 10000000 #define FACTOR1 15976 #define FACTOR2 4297157 @@ -34,14 +32,21 @@ #define MISC0_REFTOP_SELBIASOFF (1 << 3) #define TEMPSENSE1_MEASURE_FREQ 0xffff

+struct thermal_data { + unsigned int fuse; + int passive; + int minc; + int maxc; +}; + static int read_cpu_temperature(struct udevice *dev) { int temperature; unsigned int reg, n_meas; const struct imx_thermal_plat *pdata = dev_get_platdata(dev); struct anatop_regs *anatop = (struct anatop_regs *)pdata->regs; - unsigned int *priv = dev_get_priv(dev); - u32 fuse = *priv; + struct thermal_data *priv = dev_get_priv(dev); + u32 fuse = priv->fuse; int t1, n1; u32 c1, c2; u64 temp64; @@ -119,11 +124,12 @@ static int read_cpu_temperature(struct udevice *dev)

int imx_thermal_get_temp(struct udevice *dev, int *temp) { + struct thermal_data *priv = dev_get_priv(dev); int cpu_tmp = 0;

cpu_tmp = read_cpu_temperature(dev); - while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) { - if (cpu_tmp >= TEMPERATURE_HOT) { + while (cpu_tmp > priv->minc && cpu_tmp < priv->maxc) { + if (cpu_tmp >= priv->passive) { printf("CPU Temperature is %d C, too hot to boot, waiting...\n", cpu_tmp); udelay(5000000); @@ -147,7 +153,7 @@ static int imx_thermal_probe(struct udevice *dev) unsigned int fuse = ~0;

const struct imx_thermal_plat *pdata = dev_get_platdata(dev); - unsigned int *priv = dev_get_priv(dev); + struct thermal_data *priv = dev_get_priv(dev);

/* Read Temperature calibration data fuse */ fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse); @@ -158,7 +164,10 @@ static int imx_thermal_probe(struct udevice *dev) return -EPERM; }

- *priv = fuse; + /* set passive cooling temp to max - 20C */ + get_cpu_temp_grade(&priv->minc, &priv->maxc); + priv->passive = priv->maxc - 20; + priv->fuse = fuse;

enable_thermal_clk();

@@ -170,6 +179,6 @@ U_BOOT_DRIVER(imx_thermal) = { .id = UCLASS_THERMAL, .ops = &imx_thermal_ops, .probe = imx_thermal_probe, - .priv_auto_alloc_size = sizeof(unsigned int), + .priv_auto_alloc_size = sizeof(struct thermal_data), .flags = DM_FLAG_PRE_RELOC, };