[U-Boot-Users] Hi there, I'm using the iMX1
Hallo everybody, I just subscribe right now to the mailing list though I'm using U-boot since april '04. Nice to discover that while at the time I was doing the port to the Motorola MX1ADS board someone else was pretty much doing the same :-) Anyway, now I'm porting U-boot on an in-house developed board still based on the iMx1 processor featuring an Altera Cyclone FPGA and the smc91c111 eth controller.
By-the-way, great job Wolfgang! -Paolo Broggini
In message NDBBJGGCBKABIDHFAMBIOELPCDAA.pbroggini@softool.ch you wrote:
I just subscribe right now to the mailing list though I'm using U-boot since april '04.
Bad timing...
Nice to discover that while at the time I was doing the port to the Motorola MX1ADS board someone else was pretty much doing the same :-) Anyway, now I'm porting U-boot on an
I hope you learned the lesson: it's always a good idea to communicate with the community. Often this can avoid duplicated (and as in you case wasted) efforts.
By-the-way, great job Wolfgang!
Thanks for the compliments - which I'm passing on to all the people who contribute. Without them we would not be where we are today.
Best regards,
Wolfgang Denk
participants (2)
-
Paolo Broggini -
Wolfgang Denk