From datasheet, when READY bit is set inside PM_CTRL register, it means that

device is already in *normal* (D0) mode => it doesn't need to be wake-up.

With this patch, we only wake-up (writing on TEST_BYTE register) if PM_MODE bits of PM_CTRL register is in sleep (D1/D2) mode.

Improve code styling by grouping two narrow comments.

Signed-off-by: Bertrand Cachet bertrand.cachet@heig-vd.ch --- drivers/net/smc911x.h | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index 8ce08a9..7f4156e 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -471,8 +471,11 @@ static void smc911x_reset(struct eth_device *dev) { int timeout;

- /* Take out of PM setting first */ - if (smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) { + /* + * Take out of PM setting first + * Device is already wake up if PMT_CTRL_READY bit is set + */ + if ((smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) == 0) { /* Write to the bytetest will take out of powerdown */ smc911x_reg_write(dev, BYTE_TEST, 0x0);