Hello.

I ported the U-BOOT for the ColdFire MCF5282. I have written the routines that are needed to initialise the processor, and it works properly. The platform what I working with, is the AVNET platform. The code can be easily ported to the M5282EVB platform, by doing fews modifications.

U-BOOT starts properly, and I write:

-> setenv ethaddr xx:xx:xx:xx:xx:xx (AVNET MAC address) -> setenv ipaddr yy.yy.yy.yy (the AVNET IP address) -> setenv serverip zz.zz.zz.zz (server IP address)

the problem is when I write:

-> tftp 10000 /tftpboot/image.bin

and the answer is:

TX timeout fec.c[124] eth_send: cycles: 100 status: 8c00 retry cnt: 0

TX timeout fec.c[124] eth_send: cycles: 100 status: ac00 retry cnt: 0

TX timeout fec.c[124] eth_send: cycles: 100 status: 8c00 retry cnt: 0

.

.

.

until I press CTRL+C, to escape. Does anybody know how to solve this problem? When i do "ping yy.yy.yy.yy", it does not wok!!! I think the driver contained on /u-boot-1.1.1/cpu/mcf52x2/fec.c, works properly, but I would like tho know if it should initialise the PHY or not.

Thanks

_________________________________________________________________ Acepta el reto MSN Premium: Protección para tus hijos en internet. Descárgalo y pruébalo 2 meses gratis. http://join.msn.com?XAPID=1697&DI=1055&HL=Footer_mailsenviados_prote...