[U-Boot] Which all boards does C100 support in Mainline works with.
Hi Folks,
I would like to know Which all boards are tested with the C100 support in the Mainline.
I have a C100 Single, Pop, EVT1, EVT2, EVT0 boards
When i build the Mainline u-boot for "smdkc100_config"; make The u-boot.bin is not working out of the box.
Am i missing anything, Any kinda help is greatly appreciated.
Dear Naveen Krishna Ch,
On 1 February 2010 15:34, Naveen Krishna Ch naveenkrishna.ch@gmail.com wrote:
Hi Folks,
I would like to know Which all boards are tested with the C100 support in the Mainline.
I have a C100 Single, Pop, EVT1, EVT2, EVT0 boards
When i build the Mainline u-boot for "smdkc100_config"; make The u-boot.bin is not working out of the box.
Could you please tell me more about "not working"? It would be more helpful.
Thanks Minkyu Kang
Hi Kang,
On 1 February 2010 20:02, Minkyu Kang promsoft@gmail.com wrote:
Dear Naveen Krishna Ch,
On 1 February 2010 15:34, Naveen Krishna Ch naveenkrishna.ch@gmail.com wrote:
Hi Folks,
I would like to know Which all boards are tested with the C100 support in the Mainline.
I have a C100 Single, Pop, EVT1, EVT2, EVT0 boards
When i build the Mainline u-boot for "smdkc100_config"; make The u-boot.bin is not working out of the box.
Could you please tell me more about "not working"? It would be more helpful.
I m using Trace32 to flash Uboot.bin on SMDKC100_pop_board (EVT1). UART console never came up. I tested this on EVT2 also, UART never came up.
Thanks Minkyu Kang -- from. prom. www.promsoft.net
participants (2)
-
Minkyu Kang -
Naveen Krishna Ch