all arm boards share the same following define

size in bytes reserved for initial data CONFIG_SYS_GBL_DATA_SIZE

max number of command args CONFIG_SYS_MAXARGS

IRQ stack CONFIG_STACKSIZE_IRQ

FIQ stack CONFIG_STACKSIZE_FIQ

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com --- include/asm-arm/config.h | 12 ++++++++++++ include/configs/B2.h | 6 ------ include/configs/SMN42.h | 6 ------ include/configs/SX1.h | 6 ------ include/configs/VCMA9.h | 6 ------ include/configs/actux1.h | 6 ------ include/configs/actux2.h | 6 ------ include/configs/actux3.h | 6 ------ include/configs/actux4.h | 6 ------ include/configs/apollon.h | 6 ------ include/configs/armadillo.h | 6 ------ include/configs/assabet.h | 6 ------ include/configs/at91cap9adk.h | 2 -- include/configs/at91rm9200dk.h | 2 -- include/configs/at91rm9200ek.h | 4 ---- include/configs/at91sam9260ek.h | 2 -- include/configs/at91sam9261ek.h | 2 -- include/configs/at91sam9263ek.h | 2 -- include/configs/at91sam9rlek.h | 2 -- include/configs/cerf250.h | 6 ------ include/configs/cm4008.h | 6 ------ include/configs/cm41xx.h | 6 ------ include/configs/cmc_pu2.h | 2 -- include/configs/cradle.h | 6 ------ include/configs/csb226.h | 6 ------ include/configs/csb637.h | 2 -- include/configs/davinci_dm355evm.h | 2 -- include/configs/davinci_dvevm.h | 2 -- include/configs/davinci_schmoogie.h | 2 -- include/configs/davinci_sffsdr.h | 2 -- include/configs/davinci_sonata.h | 2 -- include/configs/delta.h | 6 ------ include/configs/dnp1110.h | 6 ------ include/configs/ep7312.h | 6 ------ include/configs/evb4510.h | 8 -------- include/configs/gcplus.h | 6 ------ include/configs/impa7.h | 6 ------ include/configs/imx31_litekit.h | 2 -- include/configs/imx31_phycore.h | 2 -- include/configs/innokom.h | 6 ------ include/configs/integratorap.h | 6 ------ include/configs/integratorcp.h | 6 ------ include/configs/ixdp425.h | 6 ------ include/configs/ixdpg425.h | 6 ------ include/configs/kb9202.h | 2 -- include/configs/lart.h | 6 ------ include/configs/logodl.h | 5 ----- include/configs/lpc2292sodimm.h | 6 ------ include/configs/lpd7a400-10.h | 4 ---- include/configs/lpd7a400.h | 2 -- include/configs/lpd7a404-10.h | 4 ---- include/configs/lpd7a404.h | 2 -- include/configs/lubbock.h | 6 ------ include/configs/modnet50.h | 6 ------ include/configs/mp2usb.h | 2 -- include/configs/mx1ads.h | 6 ------ include/configs/mx1fs2.h | 4 ---- include/configs/mx31ads.h | 2 -- include/configs/netstar.h | 2 -- include/configs/nmdk8815.h | 6 ------ include/configs/ns9750dev.h | 6 ------ include/configs/omap1510inn.h | 6 ------ include/configs/omap1610h2.h | 6 ------ include/configs/omap1610inn.h | 6 ------ include/configs/omap2420h4.h | 6 ------ include/configs/omap3_beagle.h | 6 ------ include/configs/omap3_evm.h | 6 ------ include/configs/omap3_overo.h | 6 ------ include/configs/omap3_pandora.h | 6 ------ include/configs/omap3_zoom1.h | 6 ------ include/configs/omap3_zoom2.h | 6 ------ include/configs/omap5912osk.h | 6 ------ include/configs/omap730p2.h | 6 ------ include/configs/pdnb3.h | 6 ------ include/configs/pleb2.h | 6 ------ include/configs/pm9263.h | 2 -- include/configs/pxa255_idp.h | 6 ------ include/configs/qong.h | 2 -- include/configs/sbc2410x.h | 6 ------ include/configs/scb9328.h | 7 ------- include/configs/shannon.h | 6 ------ include/configs/smdk2400.h | 6 ------ include/configs/smdk2410.h | 6 ------ include/configs/smdk6400.h | 2 -- include/configs/trab.h | 6 ------ include/configs/trizepsiv.h | 6 ------ include/configs/versatile.h | 6 ------ include/configs/voiceblue.h | 2 -- include/configs/wepep250.h | 7 ------- include/configs/xaeniax.h | 6 ------ include/configs/xm250.h | 6 ------ include/configs/xsengine.h | 6 ------ include/configs/zylonite.h | 6 ------ 93 files changed, 12 insertions(+), 447 deletions(-)

diff --git a/include/asm-arm/config.h b/include/asm-arm/config.h index 049c44e..795b53d 100644 --- a/include/asm-arm/config.h +++ b/include/asm-arm/config.h @@ -21,4 +21,16 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_

+/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* IRQ stack */ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) + +/* FIQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) + #endif diff --git a/include/configs/B2.h b/include/configs/B2.h index e5439f3..22c0269 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -116,7 +115,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */ @@ -135,10 +133,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index adb6ac5..1bacfd3 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -132,7 +131,6 @@ #define CONFIG_SYS_PROMPT "SMN42 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x81800000 /* memtest works on */ @@ -153,10 +151,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 6149276..665f54e 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -47,7 +47,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -127,7 +126,6 @@ #define CONFIG_SYS_PROMPT "SX1# " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -148,10 +146,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index de3092d..e510600 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -100,7 +100,6 @@ * Size of malloc() pool */ /*#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024)*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */ @@ -164,7 +163,6 @@ #define CONFIG_SYS_PROMPT "VCMA9 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ @@ -196,10 +194,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 91f6ff0..d1a9b02 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -55,7 +55,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -88,7 +87,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

@@ -111,10 +109,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113842 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index b936938..fd850eb 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -79,7 +78,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

@@ -102,10 +100,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113042 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index f5ee899..4f97e09 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -77,7 +76,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

@@ -101,10 +99,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113442 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 8d70a26..2c34566 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -76,7 +75,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

@@ -99,10 +97,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113003 diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 925079d..7aebe62 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -78,7 +78,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* * Hardware drivers @@ -189,7 +188,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ @@ -213,10 +211,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index f7eec27..42b3d38 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -100,7 +99,6 @@ #define CONFIG_SYS_PROMPT "ARMADILLO # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -119,10 +117,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 8c5b84c..97fbcc3 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */

/* * Hardware drivers @@ -102,7 +101,6 @@ #define CONFIG_SYS_PROMPT "Intel Assabet # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -122,10 +120,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index b2e6d7d..e284ed2 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -197,7 +197,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 @@ -207,7 +206,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32*1024) /* regular stack */

diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 56128c1..2d16446 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -79,7 +79,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE 115200

@@ -215,7 +214,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_SYS_HZ 1000 diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index c898c73..f651277 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -280,7 +280,6 @@ #define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -318,9 +317,6 @@ struct bd_info_ext { #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024 \ , 0x1000) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* Unsure if to big or to small*/ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* Unsure if to big or to small*/ #endif diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index e46c9d6..96d01db 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -202,7 +202,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 @@ -212,7 +211,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32*1024) /* regular stack */

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index fdaa71c..726a1d8 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -206,7 +206,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 @@ -216,7 +215,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32*1024) /* regular stack */

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index d03ecee..ef5614a 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -196,7 +196,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 @@ -209,7 +208,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32*1024) /* regular stack */

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 846d165..a4c6ba0 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -164,7 +164,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 @@ -174,7 +173,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32*1024) /* regular stack */

diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index b924758..666f7ec 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -110,7 +109,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -131,10 +129,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 7ea1a46..b30654b 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -43,7 +43,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -88,7 +87,6 @@ #define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ @@ -104,10 +102,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index ea374da..69122ac 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -43,7 +43,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -88,7 +87,6 @@ #define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ @@ -104,10 +102,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 80559bf..5121b81 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -79,7 +79,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE 9600

@@ -187,7 +186,6 @@

#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_SYS_HZ 1000 diff --git a/include/configs/cradle.h b/include/configs/cradle.h index b150c22..a76c182 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -44,7 +44,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -97,7 +96,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ @@ -117,10 +115,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 12bab47..9b2604c 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -117,13 +117,11 @@ * */ #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ @@ -160,10 +158,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/csb637.h b/include/configs/csb637.h index e1cdc7f..a3b94ab 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -79,7 +79,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE 115200

@@ -212,7 +211,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_SYS_HZ 1000 diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 9a7df08..b7c7302 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -124,7 +124,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE /* Print buffer size */ \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LONGHELP @@ -147,7 +146,6 @@ /* U-Boot memory configuration */ #define CONFIG_STACKSIZE SZ_256K /* regular stack */ #define CONFIG_SYS_MALLOC_LEN SZ_512K /* malloc() arena */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */

diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 6c5d065..baa14be 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -73,7 +73,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ @@ -169,7 +168,6 @@ #define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 6612cb3..addf171 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -40,7 +40,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ @@ -110,7 +109,6 @@ #define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 6c1dc11..780d945 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* Memory Info */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ @@ -100,7 +99,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* Default Linux kernel * load address. */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 893729c..b10920f 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -73,7 +73,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ @@ -157,7 +156,6 @@ #define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/delta.h b/include/configs/delta.h index e7186e8..6eaea21 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -163,7 +162,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -194,10 +192,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index b6cfc67..4b3b532 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -49,7 +49,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -106,7 +105,6 @@ #define CONFIG_SYS_PROMPT "DNP1110 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -126,10 +124,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index 630fff3..699e870 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -102,7 +101,6 @@ #define CONFIG_SYS_PROMPT "EP7312 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -121,10 +119,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 0f415d9..1c3c771 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -46,14 +46,11 @@ #define CONFIG_SYS_NO_CP15_CACHE

#define CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) -#define CONFIG_STACKSIZE_FIQ (4*1024)

/* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* * Hardware drivers @@ -113,7 +110,6 @@ #define CONFIG_SYS_PROMPT "evb4510 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_CMDLINE_TAG /* allow passing of command line args to linux */ @@ -137,10 +133,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map after relocation diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 85db4f5..5d51395 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -60,7 +60,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */

/* @@ -115,7 +114,6 @@ #define CONFIG_SYS_PROMPT "ADS GCPlus # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -135,10 +133,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/impa7.h b/include/configs/impa7.h index c7001cc..87e850f 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -101,7 +100,6 @@ #define CONFIG_SYS_PROMPT "impA7 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -120,10 +118,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 9ac6eec..d6c6342 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -54,7 +54,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -116,7 +115,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index cbc0b92..53d9df0 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -52,7 +52,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -118,7 +117,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index ed03ad3..807f19f 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -108,13 +108,11 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ @@ -171,10 +169,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 09270ff..81dfe08 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -53,7 +53,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * PL010 Configuration @@ -99,7 +98,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ @@ -110,10 +108,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index b4219d0..f6442d6 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -118,7 +117,6 @@ SIB at Block62 End Block62 address 0x24f80000 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/

#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ @@ -129,10 +127,6 @@ SIB at Block62 End Block62 address 0x24f80000 * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 768e836..8992c7b 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -98,7 +97,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ @@ -116,10 +114,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*************************************************************** * Platform/Board specific defines start here. diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index 0c09234..56e3f46 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -68,7 +68,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -109,7 +108,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ @@ -127,10 +125,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*************************************************************** * Platform/Board specific defines start here. diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index 7dd81e6..43d50a6 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -63,7 +63,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE 115200

@@ -153,7 +152,6 @@

#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_FLASH_CFI_DRIVER diff --git a/include/configs/lart.h b/include/configs/lart.h index 5d6d460..b436f06 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -99,7 +98,6 @@ #define CONFIG_SYS_PROMPT "LART # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -119,10 +117,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 5b903f0..427f584 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x08000000 /* memtest works on */ @@ -147,10 +146,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7ce8d6d..5ffade4 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -99,7 +98,6 @@ #define CONFIG_SYS_PROMPT "LPC2292SODIMM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x40000000 /* memtest works on */ @@ -120,10 +118,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h index 6145c37..f268f3f 100644 --- a/include/configs/lpd7a400-10.h +++ b/include/configs/lpd7a400-10.h @@ -42,10 +42,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index 0724e53..c4f39e0 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -38,7 +38,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * select serial console configuration @@ -94,7 +93,6 @@ #define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h index ce23f3d..a32219e 100644 --- a/include/configs/lpd7a404-10.h +++ b/include/configs/lpd7a404-10.h @@ -42,10 +42,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index e0ff3d7..d00059b 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -38,7 +38,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * select serial console configuration @@ -94,7 +93,6 @@ #define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 43913ca..52deead 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -53,7 +53,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -119,7 +118,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -146,10 +144,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 74bab5f..6e40175 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* * Hardware drivers @@ -106,7 +105,6 @@ #define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ @@ -125,10 +123,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 3225ce7..c2693e6 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -84,7 +84,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE 115200

@@ -213,7 +212,6 @@

#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

#define CONFIG_SYS_DEVICE_DEREGISTER /* needs device_deregister */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 12e567b..8f7e675 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -61,7 +61,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)

-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * CS8900 Ethernet drivers @@ -128,7 +127,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */ @@ -148,10 +146,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 24fa144..e4e74d2 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */ #define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */

#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ @@ -99,13 +98,10 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )

-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_STACKSIZE (120<<10) /* stack size */

#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ #endif

/* SDRAM Setup Values diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index c31c06a..5671680 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -133,7 +132,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 5cfee66..a0eb42f 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -76,7 +76,6 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)

/* @@ -209,7 +208,6 @@ #define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_HUSH_PARSER diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h index 6d7b94f..158eeda 100644 --- a/include/configs/nmdk8815.h +++ b/include/configs/nmdk8815.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_LOAD_ADDR 0x800000 /* default load address */ #define CONFIG_SYS_LOADS_BAUD_CHANGE

@@ -81,15 +80,10 @@ #define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */

#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif

#define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */

#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */

diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 79dcd64..dec217b 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -50,7 +50,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial * data */

/* @@ -116,7 +115,6 @@ #define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ @@ -137,10 +135,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 8408209..a904ac6 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -50,7 +50,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -124,7 +123,6 @@ #define CONFIG_SYS_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -145,10 +143,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index 42e0198..a7ed04d 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -52,7 +52,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -119,7 +118,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -140,10 +138,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 22c873e..d41a363 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -124,7 +123,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -145,10 +143,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 1803b13..e2725bd 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -72,7 +72,6 @@ */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -210,7 +209,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ @@ -237,10 +235,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index a3d9cf6..320b7c5 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -65,7 +65,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */

/* @@ -204,7 +203,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)

@@ -231,10 +229,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index e205c01..c5c149a 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -70,7 +70,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* * Hardware drivers @@ -198,7 +197,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ /* args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) @@ -225,10 +223,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 8902312..54be159 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -57,7 +57,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */

/* @@ -190,7 +189,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ /* args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -216,10 +214,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index dbd4dcc..a5bf765 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -60,7 +60,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */

/* @@ -193,7 +192,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ /* args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -220,10 +218,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 9e000ed..cfd869e 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -66,7 +66,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */

/* @@ -200,7 +199,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)

@@ -227,10 +225,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 1d696b6..72b8d07 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -61,7 +61,6 @@ #define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* * Hardware drivers @@ -156,7 +155,6 @@ #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) /* Memtest from start of memory to 31MB */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) @@ -179,10 +177,6 @@ * The stack sizes are set up in start.S using these settings */ #define CONFIG_STACKSIZE SZ_128K -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K -#define CONFIG_STACKSIZE_FIQ SZ_4K -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index d0ce9dc..f17d052 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -54,7 +54,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -128,7 +127,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -149,10 +147,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index 32a9b23..b46cc63 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -59,7 +59,6 @@ */

#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -136,7 +135,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ @@ -159,10 +157,6 @@ */

#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 1255f21..8822713 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -64,7 +64,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -111,7 +110,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ @@ -128,10 +126,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*************************************************************** * Platform/Board specific defines start here. diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 635ef71..728f91c 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -49,7 +49,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -119,7 +118,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -145,10 +143,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 0db17b3..af51b71 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -345,7 +345,6 @@

#define CONFIG_SYS_PROMPT "u-boot-pm9263> " #define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP 1 @@ -356,7 +355,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */

#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */

diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 2cae8ca..03bd00e 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -75,7 +75,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * PXA250 IDP memory map information @@ -233,7 +232,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -262,10 +260,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/qong.h b/include/configs/qong.h index a67006a..08cc109 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -43,7 +43,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128

/* * Hardware drivers @@ -148,7 +147,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index eab9629..e6a731f 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -58,7 +58,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -130,7 +129,6 @@ #define CONFIG_SYS_PROMPT "[ ~ljh@GDLC ]# " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ @@ -151,10 +149,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 893c3d3..69010aa 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_PROMPT "scb9328> " /* prompt string */ #define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */

#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ @@ -107,15 +106,9 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )

-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_STACKSIZE (120<<10) /* stack size */

-#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - /* SDRAM Setup Values 0x910a8300 Precharge Command CAS 3 0x910a8200 Precharge Command CAS 2 diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 13cc5ff..0306870 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -102,7 +101,6 @@ #define CONFIG_SYS_PROMPT "TuxScreen # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ @@ -124,10 +122,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index b712db4..720086e 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -132,7 +131,6 @@ #define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */ @@ -153,10 +151,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index a473278..51cd474 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -115,7 +114,6 @@ #define CONFIG_SYS_PROMPT "SMDK2410 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ @@ -136,10 +134,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index cac58cf..d6535df 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -69,7 +69,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */

/* * Hardware drivers @@ -130,7 +129,6 @@ #define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */ diff --git a/include/configs/trab.h b/include/configs/trab.h index 51ad3ca..3b3b67e 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -94,7 +94,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -311,7 +310,6 @@

#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0x0C000000 /* memtest works on */ @@ -351,10 +349,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 49045fd..f2a0014 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -56,7 +56,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -160,7 +159,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -187,10 +185,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 8f6383b..a8caad1 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -72,7 +72,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -141,7 +140,6 @@ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ @@ -152,10 +150,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index aa8efaa..15be841 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -86,7 +86,6 @@ /* * Size of malloc() pool and stack */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_STACKSIZE (1 * 1024 * 1024) #define PHYS_SDRAM_1_RESERVED (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) @@ -204,7 +203,6 @@ #define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 9a20cce..e24284e 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_PROMPT "WEP> " /* prompt string */ #define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */

#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */ @@ -100,15 +99,9 @@ * Malloc pool need to host env + 128 Kb reserve for other allocations. */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

#define CONFIG_STACKSIZE (120<<10) /* stack size */

-#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - /* * SDRAM Memory Map */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 83883f6..e2de134 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -114,7 +114,6 @@ * used for the RAM copy of the uboot code */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Miscellaneous configurable options @@ -131,7 +130,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -188,10 +186,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * SMSC91C111 Network Card diff --git a/include/configs/xm250.h b/include/configs/xm250.h index f18701a..13bb4c9 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -45,7 +45,6 @@ * */ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -115,7 +114,6 @@ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ @@ -144,10 +142,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 2697cca..81ccaef 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -91,7 +91,6 @@

/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* Hardware drivers */ #define CONFIG_DRIVER_SMC91111 @@ -139,7 +138,6 @@ #define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ @@ -154,10 +152,6 @@

/* Stack sizes - The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* GP set register */ #define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 15c3708..ce7dfc2 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -54,7 +54,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

/* * Hardware drivers @@ -136,7 +135,6 @@ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_DEVICE_NULLDEV 1

@@ -166,10 +164,6 @@ * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif

/* * Physical Memory Map