[U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet
Use the same name as defined in the datasheet. DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla ashokkourla2000@gmail.com --- arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index afaa068..377d97f 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -530,8 +530,8 @@ enum { MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
Dear Ashok,
Use the same name as defined in the datasheet. DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla ashokkourla2000@gmail.com
Acked-by: Marek Vasut marex@denx.de
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index afaa068..377d97f 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -530,8 +530,8 @@ enum { MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1,
0x0000,
0, 0), MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK = IOMUX_PAD(0x0470, 0x015C, 1,
0x0000, 0, 0), + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1,
0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000,
0,
0),
Best regards, Marek Vasut
On 15/06/2012 15:48, Ashok wrote:
Use the same name as defined in the datasheet. DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla ashokkourla2000@gmail.com
Applied to u-boot-imx, thanks.
Best regards, Stefano Babic
On 07.07.2012 18:54, Stefano Babic wrote:
On 15/06/2012 15:48, Ashok wrote:
Use the same name as defined in the datasheet. DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla ashokkourla2000@gmail.com
Applied to u-boot-imx, thanks.
Hmm, this isn't part of v2012.07-rc1? Sorry if I missed something.
Best regards
Dirk
On 11/07/2012 08:39, Dirk Behme wrote:
On 07.07.2012 18:54, Stefano Babic wrote:
On 15/06/2012 15:48, Ashok wrote:
Hi Dirk,
Use the same name as defined in the datasheet. DSP_CLK -> DISP_CLK
Signed-off-by: Ashok Kumar Reddy Kourla ashokkourla2000@gmail.com
Applied to u-boot-imx, thanks.
Hmm, this isn't part of v2012.07-rc1? Sorry if I missed something.
It is not, I applied it after -rc1.
Cheers, Stefano
participants (4)
-
Ashok -
Dirk Behme -
Marek Vasut -
Stefano Babic