This enables the support for the Allwinner A23 Evaluation Board (EVB), that already had a device tree (from Linux) but no defconfig.

This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an accelerometer and light sensor, as well as a USB HSIC hub and a USB OTG mini-USB connector. It also has a Wifi/BT chip.

Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done through dedicated pin headers.

Signed-off-by: Florent Jacquet florent.jacquet@free-electrons.com --- configs/sun8i_a23_evb_defconfig | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 configs/sun8i_a23_evb_defconfig

diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig new file mode 100644 index 0000000..296df00 --- /dev/null +++ b/configs/sun8i_a23_evb_defconfig @@ -0,0 +1,19 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=63351 +CONFIG_USB0_VBUS_PIN="axp_drivebus" +CONFIG_USB0_VBUS_DET="axp_vbus_detect" +CONFIG_USB1_VBUS_PIN="PH7" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_USB_EHCI_HCD=y